Abstract:Abstract Funding Acknowledgements Type of funding sources: Private company. Main funding source(s): Research Support from Siemens Healthineers GmbH. Background In bSSFP sequences commonly used for cardiac MRI, signal modulation (e.g. banding artifacts) due to B0 inhomogeneity is often observed, especially at higher field strengths. The spatial position of these artifacts can be shifted by a frequency offset to reduce artifacts in a region of interest (ROI), e.g. the heart. To this end, frequency scout (FS) scans are acquired to visually select the optimal frequency offset [1,2]. In this work, we propose a fully automated image-based system for selecting the optimal frequency offset on FS images based on machine learning. Methods The proposed prototype system consists of four main steps (Fig.1). First, a pre-trained deep-learning-based whole heart segmentation network is applied on a four chamber-view FS image to localize the ROI where artifacts should be reduced. Second, high frequency components within the ROI (for each frequency offset in the FS series) are extracted by successive processing of Fourier transformation, high-pass filtering, inverse Fourier transformation and subtraction over series. and N images with the lowest high-frequency content are selected. Third, an adaptive weighting map for each FS image is generated which penalizes signal deviations from a pixel-wise median that is calculated based on the selected images [3]. By averaging the maps and selecting the frame with maximum percentage, the optimal frequency offset is selected. A total of 38 datasets, acquired on multiple clinical 3T MRI scanners (MAGNETOM Skyra, Vida, Prisma, Lumina; Siemens Healthcare, Erlangen, Germany), were used to evaluate the proposed system. All FS series were annotated manually and used to compare with the system output. The experts were allowed to select multiple possible optimal FS images within a FS series. In case of multiple annotations, the system output was labelled as correct when it selected one of the offsets chosen by the expert. Further, the generated weighting maps were visually evaluated. Results The proposed system achieved an accuracy of 92.1% compared to experts’ ground truth annotations. From the failed cases (n=3), the maximum difference was off by 2 frames. Based on the generated weighting maps, a reasonable decision on the selection of the optimal frequency offset is made. The algorithm successfully selects an FS image with minimized banding and flow artifacts within the ROI (Fig. 2a). Further, it reveals that the generated weighting map correctly suppress areas containing artifacts (Fig. 2b). Conclusions Initial results demonstrate the feasibility of the proposed system to automatically select the optimal frequency offset on FS scans. Therefore, it can improve the automation of a cardiac MRI workflow. An example of the result of each step

Frequency-modulated SSFP with radial sampling and subspace reconstruction: A time-efficient alternative to phase-cycled bSSFP

Rapid 3D Dynamic Arterial Spin Labeling with a Sparse Model-Based Image Reconstruction

Rotated spiral RARE for high spatial and temporal resolution volumetric arterial spin labeling acquisition

Sparsity-constrained SENSE reconstruction: An efficient implementation using a fast composite splitting algorithm

HF-SENSE: an Improved Partially Parallel Imaging Using a High-Pass Filter

Volumetric abdominal perfusion measurement using a pseudo-randomly sampled 3D fast-spin-echo (FSE) arterial spin labeling (ASL) sequence and compressed sensing reconstruction.

Submillimeter balanced SSFP BOLD–functional MRI accelerated with 3D stack‐of‐spirals at 9.4 T

Fat-suppressed alternating-SSFP for whole-brain fMRI using breath-hold and visual stimulus paradigms

Phase-Incremented Steady-State Free Precession As an Alternate Route to High-Resolution NMR.

Fat-Water Selective Excitation in Balanced Steady-State Free Precession Using Short Spatial-Spectral Rf Pulses

Accelerated 3D bSSFP Using a Modified Wave-CAIPI Technique With Truncated Wave Gradients

Fat suppression using frequency‐sweep RF saturation and iterative reconstruction

Partial Fourier Transform Reconstruction for Single-Shot MRI with Linear Frequency-Swept Excitation.

Arterial spin labeled perfusion imaging with balanced steady-state free precession readout and radial sampling

Fully automated machine learning-based selection of optimal bSSFP frequency offset for artifact reduction in cardiac MRI

Highly-accelerated CEST MRI Using Frequency-Offset-dependent K-Space Sampling and Deep-Learning Reconstruction

A 3D k-space Fourier encoding and reconstruction framework for simultaneous multi-slab acquisition.

Feasibility and optimization of 19 F MRI on a clinical 3T with a large field-of-view torso coil

Balanced steady-state free precession thoracic imaging with half-radial dual-echo readout on smoothly interleaved archimedean spirals

Accelerate Single-shot Data Acquisitions Using Compressed Sensing and FRONSAC Imaging

High resolution single‐shot myocardial imaging using bSSFP with wave encoding