Abstract:Wind energy is an integral part of nowadays energy supply and one of the fastest growing sources of electricity in the world today. Accurate models for wind energy conversion systems (WECSs) are of key interest for the analysis and control design of present and future energy systems. Existing control-oriented WECSs models are subject to unstructured simplifications, which have not been discussed in literature so far. Thus, this technical note presents are thorough derivation of a physical state-space model for permanent magnet synchronous generator WECSs. The physical model considers all dynamic effects that significantly influence the system's power output, including the switching of the power electronics. Alternatively, the model is formulated in the $(a,b,c)$- and $(d,q)$-reference frame. Secondly, a complete control and operation management system for the wind regimes II and III and the transition between the regimes is presented. The control takes practical effects such as input saturation and integral windup into account. Thirdly, by a structured model reduction procedure, two state-space models of WECS with reduced complexity are derived: a non-switching model and a non-switching reduced-order model. The validity of the models is illustrated and compared through a numerical simulation study.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to develop a high - order control design model suitable for variable - speed and variable - pitch permanent - magnet synchronous generator wind power generation systems. This model can capture all the dynamic processes that significantly affect the system power output, especially the switching behavior of power electronic devices and the pitch control system. In addition, the paper also aims to derive a state - space model with lower complexity through a structured model simplification method and discuss the effectiveness of these simplification steps. Specifically, the three main contributions of the paper are as follows: 1. **Propose and detail the complete state - space model of the variable - speed wind power generation system for the first time**: This model covers all the dynamic processes that have a significant impact on the system power output, including the switching behavior and modulation schemes of power electronic devices. 2. **Fully describe the underlying (cascaded) control and operation management system**: Consider practical constraints such as saturation effects and integral saturation. 3. **Derive a state - space model with simplified complexity through a structured method**: And study the effectiveness of the simplification steps. ### Background and Motivation of the Paper As a renewable and carbon - free energy resource, wind energy plays an important role in modern energy supply and is one of the fastest - growing power sources in the world today. Accurate models of wind energy conversion systems (WECSs) are crucial for the analysis and design of current and future energy systems. Existing control - oriented WECSs models have unstructured simplification problems that have not been discussed in the literature. Therefore, this paper fills this gap by thoroughly deriving the physical state - space model. ### Construction and Analysis of the Model 1. **Physical Modeling**: - **Aerodynamics, Turbine Torque and Transmission System**: The model takes into account the dynamic characteristics of aerodynamics, turbine torque and transmission system. - **Electrical System**: Models of the electrical system are established respectively in the three - phase (a, b, c) reference frame and the synchronous rotation (d, q) reference frame, including motor - side dynamics, power electronics and DC - link dynamics, grid - side dynamics and power output. 2. **Control and Operation Management**: - **Controller Design**: Corresponding controllers are designed for different wind speed regions (II and III), including speed controllers, torque controllers and pitch reference controllers. - **Operation Management**: Consider practical constraints in actual operation, such as input saturation and integral saturation. 3. **Model Simplification**: - **Non - switching Model**: The model is simplified by ignoring the switching behavior of power electronic devices. - **Reduced - order Model**: Further simplify the model to reduce its complexity. ### Numerical Simulation Verification The effectiveness of the proposed model is verified through numerical simulation research and compared with other models. ### Conclusion Through detailed physical modeling and control design, this paper provides a high - order control design model suitable for variable - speed permanent - magnet synchronous generator wind power generation systems, and derives a low - complexity state - space model through a structured model simplification method, providing strong support for the control design of wind power generation systems.

Full- & Reduced-Order State-Space Modeling of Wind Turbine Systems with Permanent-Magnet Synchronous Generator

Modeling and control of the wind turbine with the Direct Drive Permanent Magnet Generator integrated to power grid

Equivalent Modeling of Wind Energy Conversion Considering Overall Effect of Pitch Angle Controllers in Wind Farm

Transfer Function Based Equivalent Modeling Method for Wind Farm

Optimal Control for AWS-Based Wave Energy Conversion System

Operation Control and Space Vector Analysis on Doubly Fed Wind Power Generator

Modeling and hardware-in-the-loop implementation of real-time aero-elastic-electrical co-simulation platform for PMSG wind turbine

Multi-Scale Modeling and Simulation of DFIG-Based Wind Energy Conversion System

Mathematical Models of Specific Elements of Wind Energy Conversion Systems Based on Induction Generator

Modeling and Analysis of Direct-drive Permanent Magnet Synchronous Wind Generation System

Supervisory Control of a Wind Energy System by Using a Hybrid System Approach

A Modeling Method for the Control Circuit of a Double-Fed Induction Generator in a Wind Power System Based on Multimodel Fusion

Integrated Equivalent Model of Permanent Magnet Synchronous Generator Based Wind Turbine for Large-scale Offshore Wind Farm Simulation

Average-Value Modeling of Direct-Driven PMSG-Based Wind Energy Conversion Systems

Advanced modeling and control of wind conversion systems based on hybrid generators using fractional order controllers

Modeling and control of modern wind turbine systems: An introduction

Steady State Modeling and Performance Analysis of a Wind Turbine-Based Doubly Fed Induction Generator System with Rotor Control

Considerations Regarding the Modelling of Wind Energy Conversion Systems

Modeling and Real-Time Simulation of a Doubly-Fed Induction Generator Driven by a Wind Turbine

An MPPT Control of a PMSG-Based WECS with Disturbance Compensation and Wind Speed Estimation

Power control of an autonomous wind energy conversion system based on a permanent magnet synchronous generator with integrated pumping storage