Abstract:Electroactive polymers (EAP) are smart materials that can be used as actuators, sensors or energy harvesters in many fields. We had previously studied an ionic metal-polymer composites (IPMC), which consists in an ionic polymer film such as Nafion saturated with water and coated on both sides with a thin layer of metal acting as electrodes. This system bends when it is subject to an electric field orthogonal to the film and can thus be used as an actuator. Conversely, the deflection of the film generates a potential difference between the electrodes ; the same system can therefore be used as a sensor.We have developed a ''continuous medium'' model for this system. The thermodynamics of linear irreversible processes had enabled us to establish its constitutive equations.We are currently interested in a system of close properties based on PEDOT, a semiconductor EAP. The central part of the device consists in two interpenetrating polymers playing the role of an ions reservoir. The PEDOT is polymerized on each side and forms an interpenetrating network with the two other polymers. A pseudo trilayer is obtained, the two outer layers containing the PEDOT acting as electrodes. It is then saturated with an ionic liquid. When the blade thus obtained is placed in an electric field orthogonal to its faces, the PEDOT undergoes a reduction reaction (or dedoping) on the side of the negative electrode, which attracts cations from the central part and therefore swells ; the blade ultimately bends towards the positive electrode.We have first adapted our model to this two-components system : the cations on the one hand, and the three polymers and the anions on the other hand. We have written its balance equations and thermodynamic relations first at the microscopic scale for each phase, then at the macroscopic scale for the whole material using an averaging technique. The thermodynamics of linear irreversible processes then provides its constitutive relations : a Kelvin - Voigt type stress-strain relation and generalized Fourier's and Darcy's laws. The equations obtained were applied to the case of a cantilevered blade subject to a continuous potential difference at constant temperature. The numerical resolution of the equations system enabled us to draw the profiles of the different quantities, which are very steep functions near the electrodes. We also evaluated the tip displacement and the force that must be exerted on the free end of the beam to prevent its displacement (blocking force). The results obtained are in good agreement with the experimental data published in the literature.

Analysis of multilayer electro-active tubes under different constraints

Electromechanical Analysis and Simplified Modeling of Dielectric Elastomer Multilayer Bending Actuator

A simple analytical thermo-mechanical model for liquid crystal elastomer bilayer structures

Modeling and experimental investigation of multilayer DE transducers considering the influence of the electrode layers

Semi-Analytical Modeling of Electro-strictive Behavior in Dielectric Elastomer Tube Actuators

Structronics and Actuation of Hybrid Electrostrictive/Piezoelectric Thin Shells

Transient thermo-mechanical analysis for bimorph soft robot based on thermally responsive liquid crystal elastomers

Axisymmetric Vibration and Stability of Dielectric-Elastic Tubular Bilayer System

Mechanics of Dielectric Elastomers: Materials, Structures, and Devices

Micro-Structronics and Control of Hybrid Electrostrictive/Piezoelectric Thin Shells

Optimisation of hierarchical dielectric elastomer laminated composites

The Electro-Mechanical Phase Transition Of Gent Model Dielectric Elastomer Tube With Two Material Constants

Numerical Study on the Electromechanical Behavior of Dielectric Elastomer with the Influence of Surrounding Medium

Mechanics of dielectric elastomer structures: A review

Influence of Active-to-Passive Ratio on the Deformation in Circular Dielectric Elastomer Actuators

Nonlinear electromechanical responses in multi-layered fiber-reinforced dielectric elastomer composites

Electromechanical Response and Failure Modes of A Dielectric Elastomer Tube Actuator with Boundary Constraints

Modeling of the bending of an electroactive pseudo trilayer based on PEDOT, a semiconductor polymer

Electro-Mechanical Coupling Bifurcation and Bulging Propagation in A Cylindrical Dielectric Elastomer Tube

Experimental investigation of the electromechanical phase transition in a dielectric elastomer tube

The role of electrostriction on the stability of dielectric elastomer actuators