Abstract:Lithium metal anodes can largely enhance the energy density of rechargeable batteries because of the high theoretical capacity and the high negative potential. However, the problem of lithium dendrite formation and low Coulombic efficiency (CE) during electrochemical cycling must be solved before lithium anodes can be widely deployed. Herein, a new atomic layer deposition (ALD) chemistry to realize the low-temperature synthesis of homogeneous and stoichiometric lithium fluoride (LiF) is reported, which then for the first time, as far as we know, is deposited directly onto lithium metal. The LiF preparation is performed at 150 °C yielding 0.8 Å/cycle. The LiF films are found to be crystalline, highly conformal, and stoichiometric with purity levels >99%. Nanoindentation measurements demonstrate the LiF achieving a shear modulus of 58 GPa, 7 times higher than the sufficient value to resist lithium dendrites. When used as the protective coating on lithium, it enables a stable Coulombic efficiency as high as 99.5% for over 170 cycles, about 4 times longer than that of bare lithium anodes. The remarkable battery performance is attributed to the nanosized LiF that serves two critical functions simultaneously: (1) the high dielectric value creates a uniform current distribution for excellent lithium stripping/plating and ultrahigh mechanical strength to suppress lithium dendrites; (2) the great stability and electrolyte isolation by the pure LiF on lithium prevents parasitic reactions for a much improved CE. This new ALD chemistry for conformal LiF not only offers a promising avenue to implement lithium metal anodes for high-capacity batteries but also paves the way for future studies to investigate failure and evolution mechanisms of solid electrolyte interphase (SEI) using our LiF on anodes such as graphite, silicon, and lithium.

Fast Interfacial Defluorination Kinetics Enables Stable Cycling of Low-Temperature Lithium Metal Batteries

Locally Fluorinated Electrolyte Medium Layer for High-Performance Anode-Free Li-Metal Batteries.

Adjusting Interfacial Reactions for Achieving Highly Stable Operation in Lithium Metal Batteries

Stable Low-Temperature Lithium Metal Batteries with Dendrite-Free Ability Enabled by Electrolytes with Cooperative Li+-Solvation

Interfacial "Single‐Atom‐in‐Defects" Catalysts Accelerating Li+ Desolvation Kinetics for Long‐lifespan Lithium Metal Batteries

High voltage and robust lithium metal battery enabled by highly-fluorinated interphases

High Performance Low-Temperature Lithium Metal Batteries Enabled by Tailored Electrolyte Solvation Structure.

Hybrid Polymer-Alloy-Fluoride Interphase Enabling Fast Ion Transport Kinetics for Low-Temperature Lithium Metal Batteries

Extreme Fast Charging of Lithium Metal Batteries Enabled by a Molten‐Salt‐Derived Nanocrystal Interphase

Acceleration of interfacial kinetics induced by regulation of Li + desolvation process in lithium metal-based batteries

Fast Lithium Transport Kinetics Regulated by Low Energy-Barrier LixMnO2 for Long-Life Lithium Metal Batteries

Ambiently fostering solid electrolyte interphase for low-temperature lithium metal batteries

Novel ALD Chemistry Enabled Low-Temperature Synthesis of Lithium Fluoride Coatings for Durable Lithium Anodes

Highly Active Depleting Agent of Lithium Enabled High-Rate and Long-Life Lithium Metal Batteries

High-Energy-Density Lithium Metal Batteries with Impressive Li+ Transport Dynamic and Wide-Temperature Performance from -60 to 60 °C

Tuning the Solution Structure of Electrolyte for Optimal Solid-Electrolyte-interphase Formation in High-Voltage Lithium Metal Batteries

A bifunctional fluorinated ether co-solvent for dendrite-free and long-term lithium metal batteries

Optimal Interfacial Model between the Alloy Surface and Electrolyte Solvation Structure for a Stable Lithium Metal Electrode

Inorganic Composition Modulation of Solid Electrolyte Interphase for Fast Charging Lithium Metal Batteries

Temperature-dependent interphase formation and Li+ transport in lithium metal batteries

LiF-Rich Interfacial Protective Layer Enables Air-Stable Lithium Metal Anodes for Dendrite-Free Lithium Metal Batteries