Abstract:Recently, aluminum–air batteries have attracted great interest owing to their high output energy density, low cost, and feasibility to store and transport Al metal. However, the commercial application is still hindered by the lack of a high-performance air cathode, where the oxygen reduction reaction (ORR) happens, requiring fast charge transfer and mass transport at the catalyst–electrolyte–air interface. Herein, we report an aerophilic air cathode featuring both high intrinsic catalytic activity and large three-phase interface to facilitate air transport, which is prepared by growing cobalt-embedded and nitrogen-doped carbon nanotube (CoNCNT) arrays on carbon fiber paper and then modifying surface wettability with polytetrafluoroethylene solution. The optimized air electrode during the ORR shows a high onset potential of 0.95 V and fast current increase of 342.96 mA cm<sup>–2</sup> V<sup>–1</sup>, which is comparable to the commercial 20 wt % Pt/C, and has even better stability under the same conditions. Moreover, the aluminum–air battery with the aerophilic air electrode is superior to the battery with a commercial Pt/C electrode or aerophobic electrode in terms of maximum power density and long discharging durability. Bubble behavior measurement shows that aerobic wettability plays an important role in gas transport, thus controlling ORR efficiency of the air electrode. The concept of the gas-wettable electrode proves to be effective in the enhancement of oxygen reduction kinetics and would be also adapted in other gas-involved electrodes for energy-related applications.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00837?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00837</a>.Elemental mapping images and C 1s XPS spectrum of CoNCNTs/CP; basic bubble contact angle results on different PTFE-modified CoNCNTs/CP; ORR polarization curves under different conditions and K-L plots of 0.8-CoNCNTs, Pt/C and CoNCNTs; CV curves at different scan rates of 0.8-CoNCNTs/CP, Pt/C, and CoNCNTs/CP; electrolyte droplet contact angles on 0.8-CoNCNTs/CP after the long-term reaction; optical pictures of the self-assembled Al–air battery; possible application demonstration; and table of relative atomic contents in CoNCNTs/CP (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00837/suppl_file/am1c00837_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-power double-face flow Al-air battery enabled by CeO2 decorated MnOOH nanorods catalyst

Cu/Cu2O nanoparticles co-regulated carbon catalyst for alkaline Al-air batteries

γ-MnO2 nanorod-assembled hierarchical micro-spheres with oxygen vacancies to enhance electrocatalytic performance toward the oxygen reduction reaction for aluminum-air batteries

Hierarchical Porous Manganese- and Nitrogen-Codoped Carbon Nanosheets Derived from Surface Modified Biomass as Efficient Oxygen Reduction Catalysts for Al-Air Batteries

Advanced Hollow Cubic FeCo-N-C Cathode Electrocatalyst for Ultrahigh-Power Aluminum-Air Battery

Bimetal Oxides Anchored on Carbon Nanotubes/Nanosheets as High-Efficiency and Durable Bifunctional Oxygen Catalyst for Advanced Zn-Air Battery: Experiments and DFT Calculations

AuPt Nanoparticles/ Multi-Walled carbon nanotubes catalyst as high active and stable oxygen reduction catalyst for Al-Air batteries

Aerophilic Co-Embedded N-Doped Carbon Nanotube Arrays as Highly Efficient Cathodes for Aluminum–Air Batteries

Nickel‐Nitrogen Doped MnO2 as Oxygen Reduction Reaction Catalyst for Aluminum Air Batteries

Plasma-Assisted Synthesis of Defect-Rich O and N Codoped Carbon Nanofibers Loaded with Manganese Oxides as an Efficient Oxygen Reduction Electrocatalyst for Aluminum–Air Batteries

CeO2 quantum dots embedded in 3D hierarchical porous foliaceous N-doped carbon as an efficient oxygen reduction electrocatalyst for metal-air battery

Design of Fe and Cu bimetallic integration on Nitrogen-containing microporous graphene-like carbon via a hard-template-assisted strategy as an oxygen reduction catalyst for Al-air batteries

Highly Dispersive Cerium Atoms on Carbon Nanowires as Oxygen Reduction Reaction Electrocatalysts for Zn–Air Batteries

ZnS anchored on porous N, S-codoped carbon as superior oxygen reduction reaction electrocatalysts for Al-air batteries

Co3O4@NiCo2O4 Double-Shelled Nanocages with Hierarchical Hollow Structure and Oxygen Vacancies As Efficient Bifunctional Electrocatalysts for Rechargeable Zn-air Batteries.

Integrated and Binder‐Free Air Cathodes of Co 3 Fe 7 Nanoalloy and Co 5.47 N Encapsulated in Nitrogen‐Doped Carbon Foam with Superior Oxygen Reduction Activity in Flexible Aluminum‐Air Batteries

Ultrathin Co3O4 Nanosheet Clusters Anchored on Nitrogen Doped Carbon Nanotubes/3d Graphene As Binder-Free Cathodes for Al-air Battery

Rational design of boron-nitrogen coordinated active sites towards oxygen reduction reaction in aluminum-air batteries with robust integrated air cathode

Rationalizing the effect of surface electronic structure on oxygen electrocatalyst for high performance lithium-oxygen battery

FeCo nanoparticles wrapped in N-doped carbon derived from Prussian blue analogue and dicyandiamide as efficient oxygen reduction electrocatalysts for Al-air batteries

Three-dimensional Composite Catalysts for Al-O2 Batteries Composed of CoMn2O4 Nanoneedles Supported on Nitrogen-Doped Carbon Nanotubes/Graphene.