Research on the influence of laser scanning speed on Fe-based amorphous coating organization and performance

Hao-zheng Wang,Yan-hai Cheng,Wei Song,Jin-yong Yang,Xiu-bing Liang

DOI: https://doi.org/10.1016/j.intermet.2021.107266

IF: 4.075

2021-09-01

Intermetallics

Abstract:<p>The laser cladding method was selected to prepare Fe₄₇Cr₁₅Mo₁₄Co₃C₁₅B₆ amorphous coating on H13 steel surface. The structure morphology and surface properties of the cladding layer under various laser scanning speeds were compared, which were analyzed through scanning electron microscope, electron probe and X-ray diffraction to represent the micro microstructure and phase distribution of the cladding layer. The results show that, with the increase of scanning speed, there is obvious changes of the microstructure of the cladding layer. When the scanning speed was 50 mm/s, the cladding layer was made up of large amount of crystalline phase and small amount of amorphous phase. When the scanning speed was 80 mm/s, the proportion of amorphous phase in the cladding layer increased obviously, and the crystalline phase diffused in the amorphous region. When the scanning speed further increased, the amorphous phase content increased as well. In addition, with the increase of scanning speed, the hardness and corrosion resistance of the cladding layer increased greatly as well, which indicates that the amorphous phase amount has a significant influence on the properties of the cladding layer.</p>

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering