Abstract:A removal mechanism of chromate (Cr) by synthesized kaolin supported nanoscale zero-valent iron (K-nZVI) from aqueous solution is demonstrated. Parameters which potentially influenced the functioning of K-nZVI have been investigated as well. Based on the scanning electron microscopy, Fourier transform infrared spectroscopes, X-ray crystal powder diffraction and X-ray photoelectron spectroscopy identifications, we confirm that amorphous Fe-0 core/FexOy shell nZVI can be successfully loaded into the pores and cracks, and onto the surface of kaolin. Removal efficiency of Cr by K-nZVI decreased with increasing initial pH and Cr(VI) concentration, but increased while K-nZVI dosage increased. Humic acid and phosphate had similar dual impacts on chromium removal by K-nZVI, and the inhibitory effect was obvious at high concentrations in spite of their different reaction mechanisms. In contrast, high concentrations of sulfate and nitrate could advance the chromium removal. Adsorption isotherms indicate that the removal processes are endothermic. The data obtained can be better explained with Langmuir than Freundlich model. At the conditions of 318K and optimized pH 4.0, the maximum adsorption capacity was 33.39mgg(-1) illustrating that K-nZVI was effective for the removal of total Cr. The removal mechanism is proposed to divide into four phases, including: (1) aqueous Cr(VI) ions are captured on the surface of K-nZVI; (2) the captured Cr(VI) are partly reduced to Cr(III) accompanied by Fe-0 oxidizing to Fe2+; (3) part of oxidized Fe2+ continues to reduce Cr(VI); and (4) produced Cr(III), Fe2+, and Fe3+ are formed passivation layers on the K-nZVI surface which prevent further removal of chromium and result in redundant Fe-0.

Removal of Zn(II) from chromate passivation solutions using 732-type strong acid cation exchange resin

Removal of hexavalent chromium from electroplating wastewater by ion-exchange in presence of Ni(II) and Zn(II) ions

Removal of Cr(VI) from aqueous solution by macroporous resin adsorption

The Efficient Removal of Low Concentration Hexavalent Chromium Via Combining Charged Microporous Membrane and Micellar Adsorption Filtration

Removal of Chromate(vi) from Drinking Water by Weak Base Anion Exchange Resins

High Efficient Removal of Cu(II) by a Chelating Resin from Strong Acidic Solutions: Complex Formation and DFT Certification

Removal of Pb2+ from Aqueous Solutions by a High-Efficiency Resin

Comprehensive study on the removal of chromate from aqueous solution by synthesized kaolin supported nanoscale zero-valent iron

A magnetic ion exchange resin with high efficiency of removing Cr (VI)

Chromium Removal Using Resin Supported Nanoscale Zero-Valent Iron.

ADSORPTION BEHAVIORS AND MECHANISMS OF S930 CHELATING RESIN TOWARD Cu(Ⅱ),Pb(Ⅱ) AND Cd(Ⅱ) FROM AQUEOUS MEDIA

Chromium removal from ion-exchange waste brines with calcium polysulfide

STUDIES ON ADSORPTION OF Cr(VI) WITH DIFFENRENT TYPES OF ANION EXCHANGE RESINS

Efficient removal of Cr(VI) by chitosan cross-linked bentonite loaded nano-zero-valent iron composite: Performance and mechanism

Cr(III) REMOVAL FROM AQUEOUS SOLUTION BYION EXCHANGE RESINS CONTAINING CARBOXYLIC ACID AND SULPHONIC ACID GROUPS

Fast and Highly Efficient Removal of Chromate from Aqueous Solution Using Nanoscale Zero-Valent Iron/Activated Carbon (NZVI/AC)

Effects of Co-Existing Ions and Natural Organic Matter on Removal of Chromium (vi) from Aqueous Solution by Nanoscale Zero Valent Iron (Nzvi)-Fe3o4 Nanocomposites

Corrosion Characteristics of Chromated Zinc in Sodium Chloride Solutions

Adsorption of Rhenium(VII) with Anion Exchange Resin D318

Trivalent Chromium Passivation Process for Zinc Coating

Removal of Iron(III) and Aluminum Ions from Phosphoric Acid–Nitric Acid Solutions by S957 Chelation Resin: Kinetics, Dynamic Adsorption, and Elution