Abstract:The inkjet printing process is a promising electronic printing technique for large-scale, printed, flexible and stretchable electronics because of features such as its high manufacturing speed, environmental friendliness, simple process, low cost, accurate positioning, and so on. As the base material of printed conductive patterns, conductive ink is the foundation of the development of printed electronics technology, and directly affects the performance and the quality of electronic products. In this paper, conductive ink with silver nanowires (AgNWs) was prepared, with AgNWs of lengths of 2–5 μm and diameters of 20 nm or so, isopropyl alcohol and ethylene glycol as the mixed solvents, and modified polysilane as the wetting agent. We discussed the relationship between the formula of the AgNWs ink and the surface tension, viscosity, contact angle between ink droplet and poly(ethylene) terephthalate (PET) surface, as well as the film-forming properties of the ink. Further, we analyzed the effects of the number of printed layers and the ink concentration of the AgNWs on the microstructures, photoelectric properties and accuracy of the printed patterns, as well as the change in the sheet resistance of the film during different bending cycles. The experimental results show that flexible transparent conductive patterns with a light transmittance of 550 nm of 83.1–88.4% and a sheet resistance of 34.0 Ω∙sq−1–78.3 nm∙sq−1 can be obtained by using AgNWs ink of 0.38 mg∙mL−1 to 0.57 mg∙mL−1, a poly (ethylene terephthalate) (PET) substrate temperature of 40 °C, a nozzle temperature of 35 °C, and heat treated at 60 °C for 10 min. These performances indicate the excellent potential of the inkjet printing of AgNWs networks for developing flexible transparent conductive film.

Post‐Treatment of Screen‐Printed Silver Nanowire Networks for Highly Conductive Flexible Transparent Films

A Simple Strategy towards Highly Conductive Silver‐Nanowire Inks for Screen‐Printed Flexible Transparent Conductive Films and Wearable Energy‐Storage Devices

Syntheses of Silver Nanowires Ink and Printable Flexible Transparent Conductive Film: A Review

Inkjet-Printed Silver Nanowire Ink for Flexible Transparent Conductive Film Applications

Inkjet Printing of Flexible Transparent Conductive Films with Silver Nanowires Ink

Highly transparent and conductive electrodes enabled by scalable printing-and-sintering of silver nanowires

Novel Insights into Inkjet Printed Silver Nanowires Flexible Transparent Conductive Films

High-conductivity screen-printable silver nanowire Ink for optically transparent flexible radio frequency electronics

Conductivity Enhancement of Silver Nanowire Networks Via Simple Electrolyte Solution Treatment and Solvent Washing

Fabrication of Water Base Silver Nanowire Conductive Ink and Large Scale Flexible Transparent Conductive Film

A Water-Based Silver Nanowire Ink For Fabricating High Performance Transparent Conductive Films

Aerosol Jet Printed Silver Nanowire Transparent Electrode For Flexible Electronic Application

Simultaneously improved conductivity and adhesion of flexible AgNW networks via a simple hot lamination process

A Water‐Based Silver‐Nanowire Screen‐Print Ink for the Fabrication of Stretchable Conductors and Wearable Thin‐Film Transistors

Annealing-Free and Strongly Adhesive Silver Nanowire Networks with Long-Term Reliability by Introduction of A Nonconductive and Biocompatible Polymer Binder

Cohesively Enhanced Conductivity and Adhesion of Flexible Silver Nanowire Networks by Biocompatible Polymer Sol–Gel Transition

Fabrication of Screen Printing-Based AgNWs Flexible Transparent Conductive Film with High Stability

Preparation of Smooth, Flexible and Stable Silver Nanowires-Polyurethane Composite Transparent Conductive Films by Transfer Method

Flexible Transparent Conductive Film Based on Random Networks of Silver Nanowires

Facile fabrication of large-scale silver nanowire transparent conductive films by screen printing

Conductivity enhancement of Ag nanowire ink by decorating in situ formed Ag particles under low-temperature sintering