Abstract:Incremental nonlinear dynamic inversion (INDI) is a widely used approach to controlling UAVs with highly nonlinear dynamics. One key element of INDI-based controllers is the control allocation realizing pseudo controls using available actuators. However, the tracking of commanded pseudo controls is not the only objective considered during control allocation. Since the approach only works locally due to linearization and the solution is often ambiguous, additional aspects like control efforts or penalizing the deviation of certain states must be considered. Conducting the control allocation by solving a quadratic program this results in a considerable number of weighting parameters, which must be tuned during control design. Currently, this is conducted manually and is therefore time consuming. An automated approach for tuning these parameters is therefore highly beneficial. Thus, this paper presents and evaluates a model-based approach automatically tuning the control allocation parameters of a tiltrotor VTOL using an optimization algorithm. This optimization algorithm searches for optimal parameters minimizing a cost functional that reflects the design target. This cost functional is calculated based on a test mission for the VTOL which is conducted within a simulation environment. The test mission represents the common operating range of the VTOL. The simulation environment consists of an aircraft model as well as a model of the INDI-based controller which is dependent on the control allocation parameters. On this basis, model-based optimization is conducted and the optimal parameters are identified. Finally, successful real-world tests on a 4-degrees-of-freedom testbench using the identified parameters are presented. Since the control allocation parameters can significantly influence the aircraft's stability, the 4-DOF testbench for the aircraft is required for rapid validation of the parameters at a minimum amount of risk.

Optimal Input Design for Autonomous Aircraft

Performance evaluation of gust load alleviation systems for flexible aircraft via optimal control

Large-Sized Multirotor Design: Accurate Modeling with Aerodynamics and Optimization for Rotor Tilt Angle

Control-Oriented Modeling for Flexible Aircraft

A multidisciplinary design optimization for conceptual design of hybrid-electric aircraft

Parameter Tuning Approach for Incremental Nonlinear Dynamic Inversion-Based Flight Controllers

Robust optimization of control command for aerospace vehicles with aerodynamic uncertainty

Sensitivity driven experimental design to facilitate control of dynamical systems

Effects of Aerodynamic Modeling on the Optimal Wing Kinematics for Hovering MAVs

A Gradual Optimal Design Method Based on Multidisciplinary Parameterized Model and Sensitivity Analysis

Calculation And Identification Of The Aerodynamic Parameters For Small-Scaled Fixed-Wing Uavs

EVTOL Tilt-Wing Aircraft Design under Uncertainty Using a Multidisciplinary Possibilistic Approach

Interaction-Aware Sensitivity Analysis for Aerodynamic Optimization Results using Information Theory

Exploring Multi-Fidelity Aeroelastic Tailoring: Prospect and Model Assessment

Multidisciplinary Optimisation of Flexible Aircraft Structures in Consideration of Flight Control System Demands in the Time Domain

Robust Time Optimal Controller Design For Rigid Spacecraft Under Input Saturation

Aeroservoelastic model based active control for large civil aircraft

Utilizing Artificial Neural Networks for Entry Vehicle Aerodynamic Characterization

Fuzzy-Set Theoretic Control Design for Aircraft Engine Hardware-in-the-Loop Testing: Mismatched Uncertainty and Optimality

Model Based Aircraft Design and Optimization: A Case Study with Cessna 172N Aircraft

Guidance Mechanism for Flexible Wing Aircraft Using Measurement-Interfaced Machine Learning Platform