Abstract:This study proposes a clustered dynamic adaptive chemistry (CDAC) method, which uses an iterative K-means algorithm to partition the computational cells into different groups according to their similarity in terms of the temperature and significant species compositions. Taking advantage of the clustered cells, the averaged thermo-chemical properties of the cells in the respective clusters are then used to identify the adaptive dynamic reduced chemistry through the method of direct relation graph with error propagation (DRGEP). Moreover, the integration of the chemical source term, which commonly dominates the computational effort in reactive flow simulations, is now performed using the dynamic adaptive reduced chemistry at the cluster level instead of the cell level. With this CDAC method, the on-the-fly DRGEP process as well as the chemistry integration only needs to be conducted at the cluster level, dramatically reducing the unnecessary repeated computation for similar computational cells. In addition, the adaptive dynamic reduced chemistry further accelerates the chemistry integration process due to less ordinary differential equations (ODEs) to be solved for each cluster. This newly proposed CDAC method was tested in multi-dimensional homogeneous charged compression ignition engine (HCCI), direct injection compression ignition (DICI) engine and constant volume chamber combustion (CVCC) fueled with diesel, biodiesel and kerosene through the use of their respective surrogate fuel mechanisms under different operating conditions. The performance of CDAC in terms of accuracy and efficiency were extensively analyzed and discussed using different user-defined parameters, mechanisms with different surrogate components and number of species as well as different meshes with different number of grid cells. Based on this analysis, the error tolerances in DRGEP and the error tolerances of the temperature and significant species' mass fraction are recommended as: epsilon(d) <= 0.001, epsilon(T) 20K and epsilon(Y) <= 0.01 to achieve less than 0.1% integral error. With these recommended user-defined tolerances, it can be observed that the current CDAC method is able to accurately predict the in-cylinder pressure as well as the species profile in HCCI, DICI and the flame lift-off length in CVCC when compared with the full chemistry calculations as well as the experimental results. Moreover, with the recommended user defined error tolerances and a chemical kinetic model of 112 species, this CDAC method is capable of achieving a computational time speed-up factor of more than 3 compared to the conventional DAC and of almost 5 compared to the full chemistry. Finally, the CDAC method coupled CFD was applied to simulate a diesel DICI engine under three different engine speeds with a detailed primary reference fuel (PRF) mechanism of more than 1000 species. The 3-D simulation could be finished in acceptable CPU time while being able to well capture the experimental in-cylinder pressure and heat release rate for all the three engine speeds. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.

DSBGK Method to Incorporate the CLL Reflection Model and to Simulate Gas Mixtures

Gaussian Mixture Models for Diatomic Gas−surface Interactions under Thermal Non-Equilibrium Conditions

A gas-surface interaction algorithm for discrete velocity methods in predicting rarefied and multi-scale flows: For Cercignani-Lampis boundary model

Improved Diffuse Boundary Condition for the DSBGK Method to Eliminate the Unphysical Density Drift

Efficient DSBGK simulations of the low speed thermal transpiration gas flows through micro-channels

Computational Acceleration of Multi-Dimensional Reactive Flow Modelling Using Diesel/biodiesel/jet-Fuel Surrogate Mechanisms Via a Clustered Dynamic Adaptive Chemistry Method

A hybrid Gaussian mixture/DSMC approach to study the Fourier thermal problem

Comparison between the DSMC and DSBGK Methods

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

An Accurate LED-BGK Solver on Unstructured Adaptive Meshes

An accurate LED-BGK solver on unstructured adaptive meshes (Local Extremum Diminishing interpolation)

A gas-surface interaction algorithm for discrete velocity methods in predicting rarefied and multi-scale flows: For Maxwell boundary model

Pore-scale gas flow simulations by the DSBGK and DVM methods

A Multi-Dimensional High-Order Discontinuous Galerkin Method Based on Gas Kinetic Theory for Viscous Flow Computations

Lattice Boltzmann based discrete simulation for gas-solid fluidization

Using a kinetic BGK model to determine transport coefficients of gas mixtures

Modelling of Dense Gas-Particle Flow in a Circulating Fluidized Bed by Distinct Cluster Method (DCM)

Modeling and validation of coarse-grained computational fluid dynamics–discrete element method for dense gas–solid flow simulation in a bubbling fluidized bed

Molecular dynamics simulation of particle trajectory for the evaluation of surface accommodation coefficients

Discrete Boltzmann method with Maxwell-type boundary condition for slip flow

Coarse-grained Simulations of Chemical Oscillation in a Lattice Brusselator System