Abstract:One of the main biomechanical causes for aseptic failure of orthopaedic implants is the stress shielding. This is caused by an uneven load distribution across the bone normally due to a stiff metal prosthesis component, leading to periprosthetic bone resorption and to implant loosening. To reduce the stress shielding and to improve osseointegration, biocompatible porous structures suitable for orthopaedic applications have been developed. Aim of this study was to propose a novel in-vitro model of the mechanical interaction between metal lattice structures and bovine cortical bone in compression. Analysis of the strain distribution between metal structure and bone provides useful information on the potential stress shielding of orthopaedic implants with the same geometry of the porous scaffold. Full density and lattice structures obtained by the repetition of 1.5 mm edge cubic elements via Laser Powder Bed Fusion of CoCrMo powder were characterized for mechanical properties using standard compressive testing. The two porous geometries were characterized by 750 μm and 1000 μm pores resulting in a nominal porosity of 43.5% and 63.2% respectively. Local deformation and strains of metal samples coupled with fresh bovine cortical bone samples were evaluated via Digital Image Correlation analysis up to failure in compression. Visualization and quantification of the local strain gradient across the metal-bone interface was used to assess differences in mechanical behaviour between structures which could be associated to stress-shielding. Overall stiffness and local mechanical properties of lattice and bone were consistent across samples. Full-density metal samples appeared to rigidly transfer the compression force to the bone which was subjected to large deformations (2.2 ± 0.3% at 15 kN). Larger porosity lattice was associated to lower stiffness and compressive modulus, and to a smoother load transfer to the bone. While tested on a limited sample size, the proposed in-vitro model appears robust and repeatable to assess the local mechanical interaction of metal samples suitable for orthopaedic applications with the bone tissue. CoCrMo scaffolds made of 1000 μm pores cubic cells may allow for a smoother load transfer to the bone when used as constitutive material of orthopaedic implants.

Metallic open-cell foams--a promising approach to fabricating good medical implants

Investment Casting and Mechanical Properties of Open‐Cell Steel Foams

Analysis of Microstructure Evolution and Mechanical Properties during Compression of Open-Cell Ni-Foams with Hollow Struts Using Micro-CT and FEM

Investigation of Tensile Properties and In Situ Analysis of Fracture Behavior in High-Porosity Open-Cell Nickel Foam

Mechanical Simulation of the Localized Deformation in the Aluminum Foams: A Three-Dimensional (3d) Structure Based Study

Influence of density and loading speed on static and impact properties of closed-cell metallic foams

Multi-Scale Modeling for Predicting the Stiffness and Strength of Hollow-Structured Metal Foams with Structural Hierarchy

Fundamental mechanical relations of open-cell metal foam composite materials with reticular porous structure

Mechanical interaction between additive-manufactured metal lattice structures and bone in compression: implications for stress shielding of orthopaedic implants

Experimental and Micromechanical Study of Size Effects in the Constrained Deformation of Metallic Foams

Dynamic Crushing Behavior of Random and Functionally Graded Metal Hollow Sphere Foams

Size effects in the constrained deformation of metallic foams

Mesostructural Design and Manufacturing of Open-Pore Metal Foams by Investment Casting

Analysis of the meso‐mechanical deformation behavior of Al foams and Ni/Al hybrid foams using time‐lapse μCT measurements and 3D Optical Flow

Supramolecular metallic foams with ultrahigh specific strength and sustainable recyclability

Plasticity and damage in cellular amorphous metals

A Preliminary Study on Adhesion on Steel Cylinder Filled with Aluminum Foam

Using Cu as a Spacer to Fabricate and Control the Porosity of Titanium Zirconium Based Bulk Metallic Glass Foams for Orthopedic Implant Applications

Study on Cell Deformation of Low Porosity Aluminum Foams under Quasi‐Static Compression by X‐Ray Tomography

Insight into classifications and manufacturing processes of metallic foams: A review

Mechanical Response of Open‐cell Metal foams with Single and Multi‐layer Shell During Uniaxial Compression Test.