Abstract:A high ratio (winding ratio of 1:80) pulse transformer with a modular ferrite core was developed for a repetitive resonant charging system. The magnetic core is constructed from 68 small blocks of ferrites, glued together by epoxy resin. This allows a high degree of freedom in choosing core shape and size. Critical issues related to this modular design are the size tolerance of the individual ferrite blocks, the unavoidable air gap between the blocks, and the saturation of the core. To evaluate the swing of the flux density inside the core during the charging process, an equivalent circuit model was introduced. It was found that when a transformer is used in a resonant charging circuit, the minimal required volume of the magnetic material to keep the core unsaturated depends on the coupling coefficient of the transformer and is independent of the number of turns of the primary winding. Along the flux path, 17 small air gaps are present due to the inevitable joints between the ferrite blocks. The total air gap distance is about 0.67 mm. The primary and secondary windings have 16 turns and 1280 turns, respectively, and the actually obtained ratio is about 1:75.4. A coupling coefficient of 99.6% was obtained. Experimental results are in good agreement with the model, and the modular ferrite core works well. Using this transformer, the high-voltage capacitors can be charged up to more than 70 kV from a low-voltage capacitor with an initial charging voltage of about 965 V. With 26.9 J energy transfer, the increased flux density inside the core was about 0.23 T, and the core remains unsaturated. The energy transfer efficiency from the primary to the secondary was around 92%.

High voltage charging system for pulsed power generators

A High-Voltage Pulse Transformer with a Modular Ferrite Core.

A pulsed power generator with a 20 stage transmission-line-transformer and 20 spark-gap switches

Design of Compact Transmission Line Transformer for High Voltage Nanosecond Pulses

A 10 Kw High-Voltage Pulse Generator for Corona Plasma Generation

A High-Voltage Pulse Generator for Corona Plasma Generation

An Efficient, Repetitive Nanosecond Pulsed Power Generator with Ten Synchronized Spark Gap Switches

Development of a Heavy Duty Pulsed Power Generator with Ten Spark Gap Switches

High-Frequency High-Density Bidirectional EV Charger

Transmission Line Transformers for Up to 100 Kw Pulsed Power Generation

A Novel ZVS High Voltage Power Supply for Micro-Channel Plate Photomultiplier Tubes

Novel Multiple-switch Pulsed Power Technologies

500Kv Compact Repetitive Marx Generator

A Compact High-Power Ultra-Wideband Bipolar Pulse Generator

Power Packaging Design Considerations for High Frequency High Voltage Generator

Inductive Pulsed Power Supply Consisting of Superconducting Pulsed Power Transformers with Marx Generator Methodology

Microsecond fast, battery powered, 100 kV modular pulse charger utilizing pulse transformers

A 700 kV pulse generator with a rise time on the order of several nanoseconds

Full-Bridge Modular Multilevel Submodule-Based High-Voltage Bipolar Pulse Generator With Low-Voltage DC, Input for Pulsed Electric Field Applications

A Burst Mode and Variable Frequency Voltage Sharing Control Mechanism for an Adjustable High Voltage Pulsed Converter

Design of Compact High-Voltage Capacitor Charging Power Supply for Pulsed Power Application