Wedge Absorbers In Final Cooling For A High-Energy High Luminosity Lepton Collider

David Neuffer,D. Summers,P. Snopok,T. Mohayai

DOI: https://doi.org/10.48550/arXiv.1704.07889

2017-04-26

Abstract:A high-energy muon collider scenario requires a final cooling system that reduces transverse emittance to ~25 microns (normalized) while allowing longitudinal emittance increase. Ionization cooling using high-field solenoids (or Li Lens) can reduce transverse emittances to ~100 microns in readily achievable configurations, confirmed by simulation. Passing these muon beams at ~100 MeV/c through cm-sized diamond wedges can reduce transverse emittances to ~25 microns, while increasing longitudinal emittances by a factor of ~25. Implementation will require optical matching of the exiting beam into downstream acceleration systems.

Accelerator Physics

What problem does this paper attempt to address?

This paper aims to solve the problem of the final cooling system required in high - energy and high - luminosity lepton colliders (especially muon colliders). Specifically, the goal is to reduce the transverse emittance to about 25 micrometers (normalized) while maintaining an increase in longitudinal emittance. The traditional ionization cooling method can reduce the transverse emittance to about 100 micrometers, but to achieve a smaller emittance, extremely high focusing fields need to be used at low momenta, which will lead to a significant increase in energy spread. Therefore, the paper proposes a new method - using a wedge absorber to achieve more efficient emittance exchange, thereby effectively reducing the transverse emittance without significantly increasing the six - dimensional phase - space emittance.

### Main problems solved in the paper
1. **Reducing transverse emittance**: High - energy muon colliders require a very small transverse emittance (about 25 micrometers) to ensure high luminosity at multi - TeV energies.
2. **Increasing longitudinal emittance**: While reducing the transverse emittance, allow the longitudinal emittance to increase to maintain the relative stability of the six - dimensional phase - space emittance.
3. **Efficient emittance exchange**: Achieve more efficient emittance exchange through a wedge absorber instead of relying on the traditional ionization cooling method.

### Specific methods
- **Wedge absorber**: By passing the muon beam through a centimeter - sized diamond wedge absorber, the transverse emittance can be significantly reduced while maintaining an increase in longitudinal emittance.
- **Optical matching**: It is necessary to optically match the beam after passing through the wedge absorber with the downstream acceleration system to ensure the overall performance of the system.

### Key formulas
1. **Cooling equation**:
\[
\frac{d\epsilon_{\perp}}{ds} = \frac{\mu_0 c}{2 \beta^2 \beta_{\perp} R_s} \left( \frac{E_g}{E_s} - \frac{dE}{ds} \right)
\]
where:
- \(\mu_0\) is the vacuum permeability
- \(c\) is the speed of light
- \(\beta\) is the relativistic velocity factor
- \(\beta_{\perp}\) is the transverse beta function
- \(R_s\) is the radiation length of the material
- \(E_g\) is the transverse segmentation parameter
- \(E_s\) is the characteristic scattering energy (about 14 MeV)
- \(\frac{dE}{ds}\) is the energy loss rate

2. **Equilibrium emittance**:
\[
\epsilon_{\text{eq}} = \frac{\mu_0 c}{2 \beta^2 \beta_{\perp} R_s} \left( \frac{E_g}{E_s} \right)^2
\]

3. **Momentum change of the wedge absorber**:
\[
\delta' = \frac{dp}{ds} \tan \theta / P_0
\]
where:
- \(\delta'\) is the change in momentum offset
- \(\frac{dp}{ds}\) is the momentum loss rate in the material
- \(\theta\) is the angle of the wedge
- \(P_0\) is the initial momentum

4. **Transverse emittance change**:
\[
\epsilon_x' = \epsilon_x \left( 1 - \frac{\delta_0 \sigma_{\delta}^2 \eta_0^2}{1 + \delta_0 \sigma_{\delta}^2 \eta_0^2} \right)^{-1/2}
\]

5. **Longitudinal emittance change**:
\[
\epsilon_z' = \epsilon_z \left( 1 + \frac{\delta_0 \sigma_{\delta}^2 \eta_0^2}{1 + \delta_0 \sigma_{\delta}^2 \eta_0^2} \right)^{-1/2}