Abstract:The barocaloric effect is still an incipient scientific topic, but it has been attracting an increasing attention in the last years due to the promising perspectives for its application in alternative cooling devices. Here, we present giant values of barocaloric entropy change and temperature change induced by low pressures in PDMS elastomer around room temperature. Adiabatic temperature changes of 12.0 K and 28.5 K were directly measured for pressure changes of 173 MPa and 390 MPa, respectively, associated with large normalized temperature changes (~70 K GPa-1). From adiabatic temperature change data, we obtained entropy change values larger than 140 J kg-1 K-1. We found barocaloric effect values that exceed those previously reported for any promising barocaloric materials from direct measurements of temperature change around room temperature. Our results stimulate the study of the barocaloric effect in elastomeric polymers and broaden the pathway to use this effect in solid-state cooling technologies.

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is to explore and verify the large barocaloric effect exhibited by polydimethylsiloxane (PDMS) rubber under room - temperature and low - pressure conditions. Specifically, the research aims to measure and analyze the adiabatic temperature change (\( \Delta T_S \)) and isothermal entropy change (\( \Delta S_T \)) of PDMS under different pressure changes, in order to evaluate its potential as a solid - state refrigeration material. ### Research Background and Motivation 1. **Introduction to the Barocaloric Effect**: - The barocaloric effect refers to the change in temperature or entropy that occurs when a material is subjected to an external pressure change. This effect can be used to develop new types of solid - state refrigeration devices. - Although research on the barocaloric effect is relatively scarce, it has received increasing attention in recent years due to its practicality and potential application prospects. 2. **Deficiencies in Existing Research**: - Currently, most research on the barocaloric effect focuses on ferroelectric materials and other inorganic materials, while there is less research on elastomeric polymers such as PDMS. - Previous studies have shown that although ferroelectric materials have a large barocaloric effect, they usually require high pressure, which limits their practical applications. ### Research Objectives 1. **Explore the Barocaloric Effect of PDMS**: - Measure the adiabatic temperature change and isothermal entropy change of PDMS under different pressures. - Evaluate the intensity of the barocaloric effect of PDMS under low - pressure conditions, especially in comparison with other known materials. 2. **Verify the Potential of PDMS as a Refrigeration Material**: - Compare the performance parameters of PDMS with those of other known barocaloric materials, such as the normalized temperature change (\( |\Delta T_S / \Delta \sigma| \)) and the normalized refrigeration capacity (NRC). - Evaluate the feasibility and advantages of PDMS in practical solid - state refrigeration applications. ### Main Findings - **Large Temperature Change**: At an initial temperature of approximately 283 K, when a pressure of 390 MPa is applied, the maximum measured adiabatic temperature change is - 28.5 K. - **Significant Entropy Change**: Under a pressure change of 290 K and 390 MPa, the measured isothermal entropy change is - 140 J kg\(^{-1}\) K\(^{-1}\). - **Excellent Normalized Parameters**: The normalized temperature change of PDMS is approximately 70 K GPa\(^{-1}\), much higher than other reported materials; the normalized refrigeration capacity also performs well, exceeding 9 kJ kg\(^{-1}\) GPa\(^{-1}\). ### Conclusion This research shows that PDMS exhibits a large barocaloric effect under low - pressure conditions and has great potential as a solid - state refrigeration material. This finding not only expands the research on the barocaloric effect in elastomeric polymers but also provides new ideas for the development of efficient, low - energy - consumption refrigeration technologies based on PDMS. Through these research results, the author hopes to stimulate more research on the barocaloric effect in elastomeric polymers and promote its further development in practical refrigeration applications.

Giant room-temperature barocaloric effects in PDMS rubber at low pressures

Supergiant Barocaloric Effects in Acetoxy Silicone Rubber over a Wide Temperature Range: Great Potential for Solid-state Cooling

Giant Reversible Barocaloric Effects in Nitrile Butadiene Rubber around Room Temperature

Large barocaloric effects at low pressures in natural rubber

Reversible Giant Barocaloric Effect with Broad Working Temperature Range in an Amorphous Ethylene Propylene Diene Monomer

Giant negative electrocaloric effect in antiferroelectric PbZrO3 thin films in an ultra-low temperature range

Colossal Barocaloric Effect in Carboranes as a Performance Tradeoff

Ultrasensitive barocaloric material for room-temperature solid-state refrigeration

Giant barocaloric effects in formamidinium iodide

Barocaloric response of plastic crystal 2-methyl-2-nitro-1-propanol across and far from the solid-solid phase transition

Shearo-caloric Effect Enhances Elastocaloric Responses in Polymer Composites for Solid-State Cooling

Large barocaloric effect in intermetallic La1.2Ce0.8Fe11Si2H1.86 materials driven by low pressure

Colossal barocaloric effect of plastic crystals imbedded in silicon frame near room temperature: Molecular dynamics simulation

Low-pressure-induced large reversible barocaloric effect near room temperature in (MnNiGe)-(FeCoGe) alloys

Solid-state cooling by elastocaloric polymer with uniform chain-lengths

Colossal Barocaloric Effect in Encapsulated Solid‐Liquid Phase Change Materials

Colossal barocaloric effect achieved by exploiting the amorphous high entropy of solidified polyethylene glycol

Colossal barocaloric effects in the complex hydride Li$_{2}$B$_{12}$H$_{12}$

Excellent Barocaloric Effect by Modulating Geometrical Frustrations in Mn3Pt

Giant Electrocaloric Effect in Ferroelectric Nanotubes Near Room Temperature

Colossal barocaloric effects in plastic crystals