Abstract:Borehole Imaging technology is often key for reservoir characterization and becomes more relevant when images are acquired while drilling to capture reservoir geology and petrophysical property distributions around the borehole. Logging While Drilling (LWD) high-resolution electrical/acoustics images of the borehole can resolve formation layers and heterogeneity down to 5mm (0.2in) scale and can detect response from far smaller features. This allows both, improved operational efficiency and better-informed drilling as well as shortening of the geological interpretation turn-around time from wireline logging time (days after drilling) to semi-real time (drilling time or hours after drilling). LWD high resolution images often suffer from the lack of direct downhole velocity measurements against the sensors. Depth tracking is on surface, referenced to the surface block movement. The imaging sensor acquiring data can be thousands of feet away from this surface reference. Imaging sensors on the bottom-hole assembly (BHA) are located not too far away from the drill bit. They are also subject to complex drilling-time motion such as tool whirling, stick and slip, vibration, mode coupling etc. This can make the downhole sensor movement dis-synchronized with the surface pipe depth increment. The Time-Depth conversion may accordingly get dis-synchronized to generate LWD depth image with missing features and distorted feature-integrity in depth. In severe conditions distorted image impacts real time image feature interpretation and leads to increased interpretation uncertainties. In this paper we investigate two main dis-synchronization problems using synthetic data: heave effect and BHA stick and slip effect. Pseudo velocity is computed from the surface measurement due to the lack of downhole sensor velocity direct measurement. In order to minimize heave effect, an advanced band-pass filter is proposed. The filter order is chosen in consistency with the sensor’s pseudo velocity behavior. Other properties of this advanced filter are also presented. In order to minimize the BHA stick and slip effect, pseudo velocity is analyzed as a delayed and minimized representative of the downhole sensor movement. A windowed-thresholding method is proposed to restore the compressed and stretched image features. Dip error analysis is performed by picking bed and fracture surface on the synthetic image data, before and after image distortion correction. The analysis results show a non-negligible effect on the accuracy of the true dip computed if the distortions are left un-corrected. Even in favorable logging conditions, the apparent dip error can contribute up to 50% of the total error. In this case, the image post-processing method proposed in this paper can not only improve the image quality but also reduce image interpretation uncertainties.

Pseudo-Outcrop Visualization of Borehole Images and Core Scans

Sedimentology from Wellbore to 3-D Reservoir with High-Definition Borehole Images in Both Water-Based and Oil-Based Muds

Interactive Geological Data Visualization in an Immersive Environment

Three-Dimensional Geological Mapping and Visualization of Complex Orogenic Belts

Panoramic Image Correction of Borehole Inner Wall Based on Kirchhoff Circle Detection

A Lookback Study of Well Performance Using Borehole Image Data

A New Tool for High-Resolution Sedimentological Imaging of Deepwater Clastic Reservoirs*

iSCAL for Complete Rock Characterization: Using Pore-Scale Imaging to Determine Relative Permeability and Capillary Pressure

Pore to Core Scale Characterization of Hydraulic Flow Units Using Petrophysical and Digital Rock Analyses

Synergistic application of digital outcrop characterization techniques and deep learning algorithms in geological exploration

3D geo-cellular static virtual outcrop model and its implications for reservoir petro-physical characteristics and heterogeneities

Pseudo-3D cubes from densely spaced subbottom profiles via Projection Onto Convex Sets interpolation: an open-source workflow applied to a pockmark field

Image-Based Multi-scale Reconstruction of Unresolved Microporosity in 3D Heterogeneous Rock Digital Twins Using Cross-Correlation Simulation and Watershed Algorithm

A NEW PSEUDO-VELOCITY-BASED METHOD TO MITIGATE LWD IMAGE INTERPRETATION RISKS

Application of Data Sets Visualization Technique in Petroleum Exploration

Study of the rock masses’ fractures through OPTV (Borehole Digital Optical Televiewer)

IODP Expedition 376 Whole-round Core Section Composite 360 Degree Images

Derivation of Continuous Irreducible Water Saturation and Pore Throat Aperture Distribution from Well Logs in an Offshore Brownfield

Interactive Modeling and Visualization of 3D Geological Bodies

3D Modelling of Geological Fossils and Ores by Combining High-resolution Textures with 3D Scanning Data

Using the traditional microscope for mineral grain orientation determination: A prototype image analysis pipeline for optic‐axis mapping (POAM)