Abstract:This study describes continued investigations of the response of a swirling flow to transverse acoustic excitation. This work is motivated by transverse combustion instabilities in annular gas turbine engine architectures. This instability provides a spatially varying acoustic velocity disturbance field around the annulus, so that different nozzles encounter different acoustic disturbance fields. In this study, we simulate this effect by looking at a standing wave acoustic field where the nozzle is located at either a velocity anti-node, referred to as out-of-phase forcing, and a velocity node, referred to as in-phase forcing. The out-of-phase forcing condition provides an asymmetric forcing field about the center plane of the flow and excites an asymmetric response in the flow field; the in-phase forcing provides a symmetric forcing condition and results in symmetric flow response near the nozzzle. The symmetric versus asymmetric flow response was measured in two ways. First, in the r-x plane where axial and radial components of velocity are measured using high-speed particle image velocimetry (PIV), a helical and ring vortex rollup of the shear layers is evident in the asymmetric and symmetric forcing condition, respectively. Additionally, the swirling motion of the jet is measured in the r-θ plane at two downstream locations and a spatial decomposition is used to calculate the strength of azimuthal modes in radial velocity fluctuations. At the forcing frequency, the m = 0 mode is strongly excited at the nozzle exit with symmetric forcing, while asymmetric forcing results in a strong peak in the m = 1 mode, or the first helical mode. The results in this plane of view are congruent with those in the r-x plane. Further downstream, however, the mode strengths change as the vorticity is religned and natural asymmetries of the swirling jet set in. Finally, the low frequency self-excited motion of the vortex core was measured and characterized in the unforced flow. It is composed of an m = −1 and m = −2 mode, and the physical interpretation of these mode numbers is highlighted. High amplitude acoustic forcing decreases the amplitude of oscillation of this structure in both the in-phase and out-of-phase forcing, but to varying degrees.

Tones and upstream-traveling waves in ideally expanded round impinging jets

Tones and upstream-travelling waves in ideally-expanded round impinging jets

Experimental study on acoustic resonance of subsonic and slightly underexpanded impinging jets

Jet-edge interaction tones

Acoustic tones generated by impinging jets: Differences between laminar and highly-disturbed nozzle-exit boundary layers

The feedback loops of discrete tones in under-expanded impinging jets

Acoustic characteristics of supersonic planar impinging jets

Guided-jet waves

Relationship Between Vortex and Sound in Under‐expanded Supersonic Impinging Jets

On the origin of impinging tones at low supersonic flow

Acoustic emission due to the interaction between shock and instability waves in 2D supersonic jet flows

Upstream-travelling acoustic jet modes as a closure mechanism for screech

Acoustic resonance mechanism for axisymmetric screech modes of underexpanded jets impinging on an inclined plate

Reflection and transmission of a Kelvin–Helmholtz wave incident on a shock in a jet

Wave reflections and resonance in a Mach 0.9 turbulent jet

Acoustic Feedback Loops for Screech Tones of Underexpanded Free Round Jets at Different Modes

Influence of Transverse Acoustic Modal Structure on the Forced Response of a Swirling Nozzle Flow

Resolving high-frequency aeroacoustic noises of high-speed dual-impinging jets using fast pressure-sensitive paint

Flow Dynamics and Noise Generation Mechanisms in Supersonic Underexpanded Rectangular and Planar Jets

Modal analysis of screeching elliptical jets

The initial flow structures and oscillations of an underexpanded impinging jet