Abstract:With ever-rising energy demand and diminishing sources of inexpensive energy resources, energy conservation has become an increasingly important topic. Building heating, ventilation, and air conditioning (HVAC) systems are considered to be a prime target for energy conservation due to their significant contribution to commercial buildings’ energy consumption in the US. Knowing a building’s occupancy plays a crucial role in implementing demand-response HVAC controls, with a corresponding potential for reduction of HVAC energy consumption, especially in office buildings. This paper evaluates occupancy modeling (both binary detection and multi-class estimation) using twelve ambient sensor variables. Performance of six machine-learning techniques is evaluated in both single-occupancy and multi-occupancy offices. Of the six, the decision-tree technique yielded the best overall accuracy (i.e. 96.0% to 98.2%) and root mean square error (RMSE) (i.e. 0.109 to 0.156). The contribution of each individual ambient sensor variable is evaluated via information gain. It is found that CO2, door status, and light variables have important contributions to the final modeling results. It is observed that the overall accuracy generally increases as the number of sensors increases. This paper also examines the possibility of building a global occupancy model, and explores the reasons for low performance of global occupancy estimation. Lastly, the occupancy model is used to estimate and visualize the accumulative room and thermal zone usage in an office test-bed building for three months. The results reveal that the effective vacancy accounts for a substantial portion of the operational hours, varying from 19.8% to 29.8% with an average of 23.3%, which bears significant potential for energy savings. Furthermore, the authors simulated HVAC energy consumption of the test-bed building for three months in DesignBuilder and EnergyPlus, and compared energy consumption of occupancy-based demand-response HVAC controls using the authors’ occupancy-modeling results to the conventional HVAC controls currently implemented in the test-bed building. The results demonstrate that 20% of gas and 18% of electricity could be effectively saved if occupancy-based demand-response HVAC control is implemented.

Multi-scale GIS-synthetic hybrid approach for the development of commercial building stock energy model

Sensitivity Analysis of Household Factors and Energy Consumption in Residential Houses: A Multi-Dimensional Hybrid Approach Using Energy Monitoring and Modeling

Dynamic Geospatial Modeling of the Building Stock To Project Urban Energy Demand

Modelling Building Stock Energy Consumption at the Urban Level from an Empirical Study

Integration of an energy– economy model with an urban energy model

A review of approaches and applications in building stock energy and indoor environment modelling

High-resolution Hourly Surrogate Modeling Framework for Physics-Based Large-Scale Building Stock Modeling

An open building information modelling based co-simulation architecture to model building energy and environmental life cycle assessment: A case study on two buildings in the United Kingdom and Luxembourg

A GIS-Based Approach for Urban Building Energy Modeling under Climate Change with High Spatial and Temporal Resolution

A comparison of six metamodeling techniques applied to multi building performance vectors prediction on gymnasiums under multiple climate conditions

The role of building performance simulations in citywide and national global warming mitigation policy

End-to-end deep meta modelling to calibrate and optimize energy consumption and comfort

A hybrid-model approach for reducing the performance gap in building energy forecasting

Application and evaluation of a pattern-based building energy model calibration method using public building datasets

A Systematic Approach to Occupancy Modeling in Ambient Sensor-Rich Buildings

An integrated building energy performance evaluation method: From parametric modeling to GA-NN based energy consumption prediction modeling

Assessing the impacts of urban morphology factors on the energy performance for building stocks based on a novel automatic generation framework

Supporting Decision Making for Building Decarbonization: Developing Surrogate Models for Multi-Criteria Building Retrofitting Analysis

Multi-Agent-Based Model for the Urban Macro-Level Impact Factors of Building Energy Consumption on Different Types of Land

Predicting HVAC Energy Consumption in Commercial Buildings Using Multiagent Systems

Exploring Spatial and Environmental Heterogeneity Affecting Energy Consumption in Commercial Buildings Using Machine Learning