Abstract:This research introduces a hardware implementation of DC-DC boost converter designed to elevate the DC voltage generated by renewable sources while effectively regulating it against line and load fluctuations for inverter application. The main objective is to boost the DC link voltage to the level of Vmax in the output AC voltage obtained from inverter circuits. This enables the inverters for transformer-less power conversion from DC to AC to reduce magnetic losses, size and weight of the inverter circuits used in the utility application. The proposed converter's topology and switching sequences play a crucial role in enhancing overall performance. Utilizing a Zero Current Switching (ZCS) technique, the converter efficiently recovers stored energy from the magnetics. The proposed converter attained the output voltage of 350 V at its current of 1A from the input voltage of 20 V at its current of 19 A. The ZCS technique and the topology of the converter enhances the efficiency to 92 %. The study employs traditional Proportional-Integral (PI) and Proportional-Integral-Derivative (PID) controllers for effective voltage regulation, analysing time domain specifications. Additionally, a Fuzzy logic controller is introduced as an alternative to PID controllers to compare their performance metrics, evaluating the optimization of the converter's transient and steady-state behaviours. The proposed converter is designed, simulated and their performance metrics are analysed using MATLAB for both with and without controllers. The step-time characteristics of the proposed converter with load resistance of RL = 500 Ω and an input voltage of Vi = 20 V has been determined and analysed. The PID system attained a rise time of 88.781 ms, an overshoot value of 9.341 %, and a steady-state error of 0.00043. The fuzzy system achieved a low-rise time of 10.624 ms, a low overshoot of 0.55 %, and a steady-state error of 0.0584. The hardware prototype of the proposed converter is implemented with a FPGA based PID and Fuzzy logic controllers for providing better voltage regulation and to improve the performance metrics of the converter. The simulation and experimental findings are contrasted, examined, and confirmed to ensure improved consistency in performance measures.

Fuzzy controller based on input current slope for a three-stage cascaded boost converter

A Multimode Digital Controller IC for Flyback Converter with High Accuracy Primary-Side Feedback

Design and Simulation of a PFM-PWM Hybrid Controller for DCDC Converter with CLLC Topology

Design of High-gain Converter for Low Input Voltage and High Input Current in Energy Feedback Electronic Load System

Performance comparison between PID and Fuzzy logic controllers for the hardware implementation of traditional high voltage DC-DC boost converter

Voltage control of DC-DC Three level Boost converter using TS Fuzzy PI controller

Using Fuzzy Control for Parallel-Inverter System with Nonlinear-Load

Model-Free Predictive Current Control of a Multilevel Cascaded H-bridge inverter for Photovoltaic Systems

An Input-Series Output-Parallel DC–DC Converter Based on Fuzzy PID Three-Loop Control Strategy

Advanced controller design based on interval type-2 fuzzy neural network for elementary super-lift Luo converter

Dynamic Modeling and Controller Design for a Single-Stage Single-Switch Parallel Boost-Flyback–Flyback Converter

Adaptive fuzzy fractional-order sliding-mode control of LCL-interfaced grid-connected converter with reduced-order

A Smooth Sliding Mode Control For A High-Conversion-Ratio Bidirectional Dc-Dc Converter

Fuzzy Logic System-Based Sliding-Mode Control for Three-Level NPC Converters

Integration of cascaded controllers for super-lift Luo converter with buck converter in solar photovoltaic and electric vehicle

Power Source Converter Based on a Variable-Domain Fuzzy PI Control

Enhancement of DC‐bus Voltage Regulation in Cascaded Converter System by a New Sensorless Load Current Feedforward Control Scheme

Fuzzy Logic Controlled Voltage Source Converter in Grid Connected Application Via LCL Filter

Design And Control Of A Floating Interleaved Boost Dc-Dc Converter For Fuel Cell Applications

Design of adaptive fuzzy logic controller for auto-adjustable DC-DC converters

Adaptive Deep-Learning-Based Steady-State Modeling and Fast Control Strategy for CLLC DC-DC Converter in Highly Renewable Penetrated System