Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Spiral bevel gear is widely used in the automotive and aerospace manufacturing industries, and the machining process is complex and the material is difficult to cut. The characteristics of high hardness, strong chemical reactivity and poor heat dissipation make the machinability of 20CrMnTi poor for face-hobbing machining of spiral bevel gear. In the process of cutting, there are some problems such as severe tool wear, poor machining quality and low machining efficiency caused by higher cutting force and higher cutting temperature. Therefore, it is necessary to study and analyze the wear experiment of the cutting tools of spiral bevel gear for face-hobbing deeply. Firstly, under the single factor experimental conditions, the wear patterns of inside blade and outside blade are observed and analyzed at different rotational speeds, and the tool wear conditions are detected and measured analysis. Secondly, the tool wear morphology and element distribution of rake face and flank face of inside blade and outside blade are analyzed by scanning electron microscope and energy spectrometer, and the tool wear mechanism for face-hobbing of spiral bevel gear is discussed in depth. The results demonstrate that chipping and fracture are the main patterns of tool wear; the tool wear mechanism are mainly embodied in adhesive wear, diffusion wear and oxidation wear. The tool wear is mainly distributed on the main cutting edge, top edge and corner radius, and the top edge and corner radius are more seriously worn. The research results can provide an effective basis for exploring the tool wear mechanism and improving the tool life, and provide technical support for the design and development of gear machining tools.

Research on design and manufacturing of gear slicing cutter for circular arc tooth

Analysis on wear patterns and mechanisms of carbide tool for face-hobbing of spiral bevel gear

Design method and parameter optimization of small angle rake face of hourglass worm gear hob

Slicing Technology for Cylindrical Gears

Research on the design of skiving tool for machining involute gears

Research on shaving processing of spiroid face gear

Manufacturing helical gears with double-crowning and twist-free tooth flanks using a variable pressure angle shaving cutter

Research of the Method of Chamfering Tooth Crest for Spiral Bevel Gear Using Spherical Cutter

Influence of cut parameters on mesh performance of spiral bevel gear by duplex spread blade method

Research on the skiving technology of face gear

RESEARCH ON THE MANUFACTURING AND EVALUATION METHOD FOR A CURVE-FACE GEAR

Design and manufacture of new type of non-circular cylindrical gear generated by face-milling method

Geometric design and analysis of face-gear drive with involute helical pinion

Tooth crest chamfering method of spiral bevel gear using ball end milling cutter

Research on the Cutting Principle and Tool Design of Gear Skiving Based on the Theory of Conjugate Surface

A finishing method for the continuous generation of spur face gears with shaving cutters

Research on Force-Saving Mechanism of Cutting Tool with Variable Curvature Directrix Rake Face Configuration

Mathematical modeling and forming method of rake face of toroidal worm gear hob based on conical production surface

A Novel Cutting Method for Face-Hobbed Spiral Bevel Gears Based on Tool Path Modification

Computer-integrated shaving processing for spiroid face gear on a five-axis CNC machine

Optimization modelling and application scenario for cycloid-pin gear mechanism based on force transmission characteristics