Abstract:This study proposes an efficient, facile, and scalable strategy to synthesize in situ heteroatom-doped porous graphene via laser direct writing on the precursor-doped polyimide (PI) film, which is fabricated for the first time through incorporating PI powder and precursors with sodium carboxymethyl cellulose (CMC) binder by a drop-casting and low-temperature drying process. The resulting microsupercapacitors (MSCs) based on the as-prepared heteroatom-doped porous graphene exhibit remarkable capacitive performance. The typical boron-doped MSC prepared on borax-doped polyimide film possesses an ultrahigh areal capacitance of 60.6 mF cm–2 at 0.08 mA cm–2, which is approximately 20 times larger than that of undoped MSC. Furthermore, the boron-doped MSC has impressive cycling stability (with the capacitance retention of 96.3% after 20 000 cycles), exceptional mechanical flexibility, tunable capacitance, and voltage output through arbitrary modular serial and parallel integration. Besides, the nitrogen-doped porous graphene with excellent capacitive performance is also prepared by laser direct scribing on the sulfonated melamine-doped polyimide film, demonstrating excellent scalability and generality of this strategy. Hence, one-step laser direct writing on precursor-doped polyimide films can realize in situ heteroatom doping and generation of hierarchical porous graphene electrodes simultaneously, which opens a new avenue for the facile, cost-effective, and scalable fabrication of heteroatom-doped porous graphene, thus promising for MSCs and various flexible and wearable electronics at large-scale production.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c03219?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c03219</a>.Experimental section (materials characterization, electrochemical performance calculations, DFT calculations); photographs of LIG-B6 on PET, PMMA, and fabric substrates; SEM and TEM images of pure LIG electrodes; cross-sectional SEM images of LIG, LIG-B6, and LIG-N6 electrodes; pore size distribution of LIG and LIG-B6; Raman spectrum and a photograph of the PI/CMC film; C 1s, B 1s, and O 1s XPS speaks of LIG-Bx samples; sheet resistance and conductivity of LIG-Bx films; CV curves at scan rates from 10 to 200 mV s–1 and GCD curves at current densities from 0.08 to 1 mA cm–2 of LIG-B0, LIG-B4.5, and LIG-B7.5; SEM image of LIG-B7.5; water contact angles of LIG, LIG-B6, and LIG-N6; adsorption energy calculated by DFT of LIG-B6; volumetric capacitance and areal and volumetric Ragone plots of LIG-Bx; pore size distribution and Raman spectra of LIG-Nx; sheet resistance and conductivity of LIG, LIG-B6, and LIG-N6; GCD curves at current densities from 0.08 to 1 mA cm–2 of LIG-N3 and LIG-N9; atomic ratios of LIG-Bx; and comparison of capacitive performance of LIG-B6 with other MSCs (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03219/suppl_file/am1c03219_si_001.pdf">PDF</a>)Three LIG-B6 MSCs connected in series light a timer (Video S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c03219/suppl_file/am1c03219_si_002.mp4">mp4</a>)This article has not yet been cited by other publications.

Boosting the Electrochemical Performance of Graphene-Based On-Chip Micro-Supercapacitors by Regulating the Functional Groups

Facile Fabrication of Flexible Graphene-Based Micro-Supercapacitors with Ultra-High Areal Performance

Nitrogen and Oxygen Co-Doped Graphene Quantum Dots with High Capacitance Performance for Micro-Supercapacitors

Facile Preparation of High-Performance Free-Standing Micro-Supercapacitors by Optimizing Oxygen Groups on Graphene

A high performance and flexible in-plane asymmetric micro-supercapacitor (MSC) fabricated with functional electrochemical-exfoliated graphene

Planar Graphene‐Based Microsupercapacitors

Selective deposition of metal oxide nanoflakes on graphene electrodes to obtain high-performance asymmetric micro-supercapacitors

One‐Step Scalable Fabrication of Graphene‐Integrated Micro‐Supercapacitors with Remarkable Flexibility and Exceptional Performance Uniformity

Three-Dimensional Micro/Nano-interconnected Scaffold Graphene-Based Micro-Supercapacitors with High Electrochemical Performance

Flexible Micro-Supercapacitors Assembled Via Chemically Reduced Graphene Oxide Films Assisted by a Laser Printer.

Fabrication of flexible planar micro-supercapacitors using laser scribed graphene electrodes incorporated with MXene

Scalable High-Performance Ultraminiature Graphene Micro-Supercapacitors by a Hybrid Technique Combining Direct Writing and Controllable Microdroplet Transfer.

High areal energy density micro-supercapacitors from structure-engineered graphene electrodes via self-sacrificing template

Graphene/SiC composite porous electrodes for high-performance micro-supercapacitors

Selective laser carving-induced patterned electrodes for high-performance binder-free and substrate-free all-carbon-based micro-supercapacitors

Enhancing energy storage performance in flexible all-solid-state laser-induced graphene-based microsupercapacitors through the addition of carbon black and Prussian blue

Graphene Nanoribbons Enhancing the Electronic Conductivity and Ionic Diffusion of Graphene Electrodes for High‐Performance Microsupercapacitors

Scalable and Fast Fabrication of Graphene Integrated Micro-Supercapacitors with Remarkable Volumetric Capacitance and Flexibility Through Continuous Centrifugal Coating

Laser engraving and punching of graphene films as flexible all-solid-state planar micro-supercapacitor electrodes

Simplified Fabrication of High Areal Capacitance All-Solid-state Micro-Supercapacitors Based on Graphene and MnO2 Nanosheets

Facile and Scalable Fabrication of High-Performance Microsupercapacitors Based on Laser-Scribed In Situ Heteroatom-Doped Porous Graphene