Abstract:Vegetable tannins are excellent options to produce adhesives for the panel industry since they have the capacity to reduce formaldehyde emissions and are derived from renewable sources. They also allow for the possibility of increasing the resistance of the glue line through the use of natural reinforcements such as cellulose nanofibrils. Condensed tannins, polyphenols isolated from tree bark, are widely studied for the production of natural adhesives as an alternative to commercial synthetic adhesives. So, the purpose of our research is to show a natural adhesive alternative for wood bonding. Therefore, the objective of the study was to evaluate the quality of tannin adhesives of different species reinforced with different nanofibrils and thus predict which adhesive is the most promising at different concentrations of reinforcement and with different types of polyphenols. To meet this objective, polyphenols were extracted from the bark, nanofibrils were obtained, and both processes followed the current standards. Then, the adhesives were produced, their properties were characterized, and they were chemically analyzed via Fourier transform infrared spectroscopy (FTIR), and thermogravimetric analysis (TGA). A mechanical shear analysis of the glue line was also performed. According to the results, the addition of cellulose nanofibrils affected the physical properties of the adhesives, mostly the content of solids and the gel time. In the FTIR spectra, the OH band of the 5% Pinus and 5% Eucalyptus (EUC) TEMPO in the barbatimao adhesive and the 5% EUC of the cumate red adhesive were reduced, possibly due to their higher moisture resistance. Mechanical tests of the glue line showed that barbatimao with 5% Pinus and cumate red with 5% EUC performed best in the dry and wet shear tests. The control was the best-performing sample in the test of the commercial adhesives. The cellulose nanofibrils used as reinforcement did not change the thermal resistance of the adhesives. Therefore, the addition of cellulose nanofibrils to these tannins is an interesting means of increasing the mechanical strength, as occurred in commercial adhesive with 5% EUC. Thus, the physical and mechanical properties of tannin adhesives were better with reinforcement, making it possible to expand the use of these adhesives in the panel industry. At the industrial level, it is important to replace synthetic products with natural ones. Besides environmental and health issues, there is the question of the value of petroleum-based products, which have been widely studied so that they can be replaced.

Recent developments on ultra-low formaldehyde emitting system of tannin-based adhesive derived from tropical wood barks for wood-based products manufacturing: A review

Recent progress of biomass in conventional wood adhesives: a review

Tannin-based wood panel adhesives

Recent progress in ultra-low formaldehyde emitting adhesive systems and formaldehyde scavengers in wood-based panels: a review

Latest Advancements in the Development of High-Performance Lignin- and Tannin-Based Non-Isocyanate Polyurethane Adhesive for Wood Composites

Recent Advances in Bio-Based Adhesives and Formaldehyde-Free Technologies for Wood-Based Panel Manufacturing

Eco-friendly natural rubber latex and modified starch-based adhesive for wood-based panels application- A review

Environmentally Friendly Starch-Based Adhesives for Bonding High-Performance Wood Composites: A Review

Substitution of petrochemical compounds for polyphenols of natural origin reinforced with cellulose nanofibrils to formulate adhesives for wood bonding

A Review on Lignin‐Based Phenolic Resin Adhesive

Novel natural rubber latex/lignin-based bio-adhesive: synthesis and its application on medium density fiber-board

A Review of Bio-Based Adhesives from Primary and Secondary Biomass for Wood Composite Applications

Recent Advances on the Development of Protein-Based Adhesives for Wood Composite Materials—A Review

Easy Preparation, High Water Resistance Glucose-Based Environment-Friendly Wood Adhesives

Valorization of Uruguayan Pinus elliottii Bark by Developing Sustainable Adhesives

Tannin-based wood adhesive with good water resistance crosslinked by hexanediamine

Engineering the Properties of Eco-Friendly Medium Density Fibreboards Bonded with Lignosulfonate Adhesive

Physically crosslinked tannic acid-based adhesive for bonding wood

Novel hyperbranched resin for wood adhesive: Based on air oxidation and crosslinking copolymerization strategy

Lignin-Glyoxal: A Fully Biobased Formaldehyde-Free Wood Adhesive for Interior Engineered Wood Products

Custom-designed polyphenol lignin for the enhancement of poly(vinyl alcohol)-based wood adhesive