CO 2 gas stripped off membranous residual oil from pore surfaces: Effects of temperature, pressure and wettability

Tao Yu,Haixiang Hu,Qi Li,Yongsheng Tan,Liang Xu,Xiaomin Cao
DOI: https://doi.org/10.1016/j.jrmge.2023.07.007
IF: 5.915
2023-08-30
Journal of Rock Mechanics and Geotechnical Engineering
Abstract:The threshold values of CO 2 gas stripped off membranous residual oil from the pore walls are not clear under different temperatures, pressures and wettability conditions. The extent to which temperature, pressure and wettability influence CO 2 flooding for enhancing the recovery of residual oil in membranous formations also remains uncertain. Therefore, further quantitative characterization is entailed. In this study, the molecular dynamics method was employed to explore CO 2 flooding under different temperatures, pressures and wettability conditions, aiming to enhance the production of membranous residual oil. The results reveal that the interaction energy between CO 2 , decane molecules and pore walls exhibits a decrease with increasing temperature and an increase with increasing pressure, respectively, in distinct wettability scenarios. When the temperature was at or below 363 K and the pressure was not lower than 40 MPa, CO 2 gas could detach the membranous residual oil from the pore walls in the water-wet systems. When the temperature was equal to 363 K and the pressure remained under 40 MPa, or the temperature surpassed 363 K, CO 2 gas failed to detach the membranous residual oil from the pore walls in the water-wet systems. For the mixed-wet and oil-wet systems, CO 2 molecules could not detach the membranous residual oil from the pore walls. The hierarchy of influence regarding temperature, pressure and wettability on the competitive adsorption capacity of CO 2 and decane molecules on the pore walls emerged as follows: wettability > temperature > pressure. The findings of this study offer valuable insights into the application of CO 2 gas flooding for the exploitation of membranous residual oil on pore walls.
engineering, geological
What problem does this paper attempt to address?