Abstract:An instrument has been developed for continuous monitoring of 220Rn. The method of data analysis is based on delayed coincidences between 220Rn and 216Po. The instrument basically consists of a scaler equipped with a photomultiplier tube (PMT) to which a scintillation cell (SC) of the flow through type is optically coupled. The scaler is equipped with a pulse output (P/O) port which provides a TTL pulse, +5 V in amplitude and 5 to 10 μs duration for each nuclear event recorded by the SC and its associated electronic circuitry. The P/O port is connected to a 32 bit counter/timer unit operating at 1 MHz which records and stores the time of arrival of pulses. For laboratory use, the counter/timer is connected to the serial port of a laptop PC. However, for field applications, where space and weight pose severe practical limitations, the PC is substituted by an expanded counter/timer unit which incorporates a muprocessor for data analysis, a LCD for data display, and a keypad to key in function instructions. Furthermore, some additional hardware permits the measurement of 220Rn flux density, J(220Rn), from soils and other materials. Because total α-particle count, as well as delayed (α - α) coincidence rates are recorded in two separate channels, the method permits the measurement of 222Rn in addition to 220Rn. The method is particularly useful for low concentration levels. The sensitivity of the method primarily depends on the volume of the SC. For a low volume SC (∼0.16 l), a sensitivity of 0.2 h−1/Bq m−3 for 220Rn and 1.4 h−1/Bq m−3 for 222Rn are readily attainable. For a large volume (1.5 l) SC (external PMT used), the sensitivity for 220Rn is ≥ 1.5 h−1/Bq m−3, depending on the SC design and the operating sampling flowrate. (Note: h−1 stands for counts per hour). The above instrument has been used extensively at the National Radon/Thoron Test Facility (NRTTF) of the Elliot Lake Laboratory for routine monitoring of 220Rn levels since 1992. It has also been used for outdoor and indoor 220Rn measurements, as well as for the determination of J(220Rn) from earthen materials and the like.

Desorption of 220Rn progeny from large surfaces by alpha- and beta-recoil processes

Deposition of Radon Progeny on Indoor Surfaces

Production of No-Carrier-added 186re Via Deuteron Induced Reactions on Isotopically Enriched 186W

Transfer reaction experiments with radioactive beams: from halos to the r-process

Comprehensive Study of Radon Progeny Attachment to Surfaces

Behavior of the 222Rn daughters on copper surfaces during cleaning

An instrument for continuous measurement of 220Rn (and 222Rn) using delayed coincidences between 220Rn and 216Po

Study on Deposition-Based Measurement Method of 222Rn/220Rn Progeny Concentration

A Rn-220 source for the calibration of low-background experiments

An Improved Passive CR-39-Based Direct 222Rn/220Rn Progeny Detector

An Instrument for Measuring Equilibrium-Equivalent 222rn and 220rn Concentrations with Etched Track Detectors.

An Improved Passive CR-39-Based Ddirect <sup>222</sup>Rn/<sup>220</sup>Rn Progeny Detector

Status on Simulation and Measurements of Deposition of ~(222)Rn/~(220)Rn Progeny in Human Respiratory Tract by Using Wire Screen Diffusion Battery

Integrating high voltage electric field detector for 220 Rn progeny

$^{222}$Rn contamination mechanisms on acrylic surfaces

A high-sensitivity radon emanation detector system for future low-background experiments

An Instrument for Measuring the Unattached Fraction of Radon Progeny with Etched Track Detectors

Radon daughter removal from PTFE surfaces and its application in liquid xenon detectors

Integrating measurements of radon and thoron and their deposition fractions in the respiratory tract

Chromatographic separation of Re-188 from reactor produced W-188 using Bio-Rex 5 anion exchange resin

226Ra measurement via gamma-ray spectrometry of 222Rn progeny – quantification of radon losses from sample capsules