Abstract:This paper presents the design, modeling, and characterizing tests of an assembled freely pendulum-type active tuned mass damper (AP-ATMD) for structural vibration control, highlighting its unique features such as noncontact force transmission, nonextra stiffness, and damping members. This device can operate passively as a tuned mass damper (TMD) with optimal tuning when environmental disturbances are minimal, or it can engage efficiently in active control when significant disturbances are present. The AP-ATMD mainly consists of a robust suspension system, an arc-shaped mass block with permanent magnets (PMs), and an arc-shaped electromagnetic motor. Notably, both the electromagnetic motor and the mass block have identical curvatures. A laboratory prototype of the AP-ATMD was designed and fabricated for the purpose of characterizing tests. Furthermore, an electromechanical model based on the Bouc-Wen hysteresis loop was developed to accurately characterize the active force behavior generated by the device. The parameters of this model were identified through a series of characterizing tests of the prototype AP-ATMD under harmonic excitations, and subsequently were validated under random excitation. The results confirmed the efficacy of the proposed electromechanical model in precisely capturing the active force behavior across a wide array of operational conditions. Finally, a numerical simulation of a 3-story frame with the AP-ATMD installed was conducted. The outcomes of the simulation highlighted the AP-ATMD's ability to reduce structural responses significantly. Moreover, the system employing the proposed electromechanical model outperformed a linear model, demonstrating a superior reduction in structural response.

A Five-Freedom Active Damping and Alignment Device Used in the Joule Balance

A Magnetic Damping Device For Watt And Joule Balances

Quantitative Analysis of Tubular Dual-Armature Switched Flux Permanent Magnet Machines for Shock Absorbers

Automatic alignment technique for the suspended coil in the joule balance

Methods for Measuring and Controlling the Movable Coil Position of the Joule Balance

Active Vibration Control of Flexible Structures with Super-Coiled Actuators

Measurement and control of the movable coil position of a joule balance with a system based on a laser heterodyne interferometer

A Parasitic Displacement Measurement System for Suspended Coil in Joule Balance

Alignment technology for coil movement of Joule Balance

Stability improvement for coil position locking of joule balance

Axial Active-Passive Suspension Electromagnetic System in Radial Air Gap for the Maglev Pump.

The static state analysis of the balance suspension system for its displacement measuring

A Novel Assembled Pendulum-Type ATMD for Structural Vibration Control

Output Feedback Dynamical Compensation Via EigenStructure Assignment for Active Magnetic Bearings-Rigid Rotor Systems.

Auto balance of active magnetic bearings for rotor support system by means of unbalance identification

Coils and the Electromagnet Used in the Joule Balance at the NIM

On-line Identification Based Unbalance Vibration Control With Less Regard to Rotor Speed in Active Magnetic Bearings Supporting Rotor System

Automatic Measurement of Stiffness and Damping of Active Magnetic Bearings

Distributed Structural Dynamics Control of Flexible Manipulators—ii. Distributed Sensor and Active Electromechanical Actuator

The Interaction Between the Magnetized Coil-Suspension System and the Compensation Coil in the Joule Balance

Modeling and Design of an Overlapped-Flexure Hinge for Joule Balance