Wide bandwidth and high resolution planar filter array based on DBR-metasurface-DBR structures

Yu Horie,Amir Arbabi,Ehsan Arbabi,Seyedeh Mahsa Kamali,Andrei Faraon

DOI: https://doi.org/10.1364/OE.24.011677

2016-04-12

Abstract:We propose and experimentally demonstrate a planar array of optical bandpass filters composed of low loss dielectric metasurface layers sandwiched between two distributed Bragg reflectors (DBRs). The two DBRs form a Fabry-Pérot resonator whose center wavelength is controlled by the design of the transmissive metasurface layer which functions as a phase shifting element. We demonstrate an array of bandpass filters with spatially varying center wavelengths covering a wide range of operation wavelengths of 250 nm around {\lambda} = 1550 nm ({\Delta}{\lambda}/{\lambda} = 16%). The center wavelengths of each filter are independently controlled only by changing the in-plane geometry of the sandwiched metasurfaces, and the experimentally measured quality factors are larger than 700. The demonstrated filter array can be directly integrated on top of photodetector arrays to realize on-chip high-resolution spectrometers with free-space coupling.

Optics

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to develop a planar band - pass filter array. This filter array can achieve wide bandwidth and high resolution, and can be directly integrated with a photodetector array to realize a high - resolution spectrometer on a chip. Traditional high - resolution diffraction grating spectrometers are bulky and not suitable for miniaturization applications, while existing integrated optical methods have limitations in terms of free - space coupling efficiency. This paper proposes a new planar filter array based on the DBR - metasurface - DBR structure. By inserting a low - loss dielectric metasurface layer as a phase - shift element between two distributed Bragg reflectors (DBRs), independent control of the central wavelength of each filter is achieved, thus solving the above - mentioned problems.

Specifically, the goals of the paper are:
1. **Achieve wide bandwidth and high resolution**: The designed filter array covers a 250 - nm bandwidth (a relative bandwidth of 16%) from 1450 nm to 1700 nm, and the experimentally measured quality factor is greater than 700.
2. **Independently control the central wavelength**: By changing the planar geometry of the metasurface layer sandwiched between two DBRs, the central wavelength of each filter can be independently controlled.
3. **Be compatible with existing manufacturing processes**: The proposed filter array has a planar structure and can be manufactured through binary lithography steps, which is suitable for large - scale production.
4. **Be suitable for spectrometers on a chip**: This filter array can be directly integrated on a photodetector array to realize a high - resolution spectrometer on a chip, which is suitable for handheld devices and portable diagnostic tools.

Through the achievement of these goals, the paper provides a new solution for the development of miniaturized, high - performance spectrometers.