ANISOTROPY MEASUREMENTS USING STRATOSPHERIC BALLOONS

P. Bernardis,S. Masi
Abstract:We review the topic of Cosmic Microwave Background Anisotropy measurements carried out by means of balloon-borne telescopes. After a short description of the experimental methodology , we outline the peculiar problems of these experiments, and we describe the main results obtained and the perspects for future developments. 1.1 Stratospheric Balloons Stratospheric balloons are space carriers offering flights at 30-40 Km altitude, for payloads with mass up to 2500 Kg, with reasonable cost and short development time scales. The available time at float ranges between a few hours and a couple of weeks. The intrinsic payload stability is of the order of a few arcminutes. The observable elevations are between 0 o and 65 o (or up to the zenith placing the payload on top of the balloon). The team of NASA-NSBF (USA) offers 6-48 hours flights over North America and 1-2 weeks flights in Artic and Antarctic (Long Duration Balloons). The team of CNES (France) offers balloon flights of a few hours over France and up to 60 hours in Sweden. The team of ASI (Italy) offers 20-40 hours transmediterranean flights from Sicily to Spain. Balloon flights are also carried out by teams in Russia, Brazil, Japan and in China. Infrared mongolfieres 1 have been used for ultra long duration flights of lightweight payloads (∼ 50 Kg). Superpressure balloons are being developed, providing in the near future ultra-long (∼ 3 months) balloon flights for medium-mass payloads. 1.2 CMB measurements from Stratospheric Balloons The main advantage of placing a CMB telescope on a stratospheric balloon is a large reduction of the atmospheric brightness (temperature) and noise. This effect is wavelength dependent. The advantage is huge for observation wavelengths above 100 GHz, while it is not too important for wavelenghts below 40 GHz, where longer observation time and easier access to the experiment favour high mountain observations. For wide band bolometric receivers the balloon environment offers an additional advantage, since the reduced radiation background permits to reach a lower temperature of the sensor, thus increasing significantly its sensitivity. A generic instrument for the measurement of CMB anisotropies is composed by the following main subsystems: the gondola, usually an aluminum or carbon fiber tubolar lightweight structure with an inner frame (containing the telescope, the receiver and a star sensor for attitude reconstruction) and an outer frame containing the elevation mechanism for the inner frame, the azimuth mechanism and a pivot to rotate the …
What problem does this paper attempt to address?