Abstract:It has been predicted that several changes will occur when premixed flames are subjected to the extreme levels of turbulence that can be found in practical combustors. This paper is a review of recent experimental and DNS results that have been obtained for the range of extreme turbulence, and it includes a discussion of cases that agree or disagree with predictions. "Extreme turbulence" is defined to correspond to a turbulent Reynolds number (Re-T, based on integral scale) that exceeds 2800 or a turbulent Karlovitz number that exceeds 100, for reasons that are discussed in Section 2.1. Several data bases are described that include measurements made at Lund University, the University of Sydney, the University of Michigan and the U.S. Air Force Research Lab. The data bases also include DNS results from Sandia National Laboratory, the University of New South Wales, Newcastle University, the California Institute of Technology and the University of Cambridge. Several major observations are: (a) DNS now can be achieved for a realistic geometry (of the Lund University jet burner) even for extreme turbulence levels, (b) state relations (conditional mean profiles) from DNS and experiments do tend to agree with laminar profiles, at least for methane-air and hydrogen-air reactants that are not preheated, and (c) regime boundaries have been measured and they do not agree with predicted boundaries. These findings indicate that the range of conditions for which flamelet models should be valid is larger than what was previously believed. Additional parameters have been shown to be important; for example, broken reactions occur if the "back-support" is insufficient due to the entrainment of cold gas into the product gas. Turbulent burning velocity measurements have been extended from the previous normalized turbulence levels (u'/S-L) of 24 up to a value of 163. Turbulent burning velocities no longer follow the trend predicted by Shchelkin but they tend to follow the trend predicted by Damkohler. The boundary where flamelet broadening begins was measured to occur at Re-Taylor = 13.8, which corresponds to an integral scale Reynolds number (Re-T) of 2800. This measured regime boundary can be explained by the idea that flame structure is altered when the turbulent diffusivity at the Taylor scale exceeds a critical value, rather than the idea that changes occur when Kolmogorov eddies just fit inside a flamelet. A roadmap to extend DNS to complex chemistry and to higher Reynolds numbers is discussed. Exascale computers, machine learning, adaptive mesh refinement and embedded DNS show promise. Some advances are reviewed that have extended the use of line and planar PLIF and CARS laser diagnostics to studies that consider complex hydrocarbon fuels and harsh environments. (C) 2019 Elsevier Ltd. All rights reserved.

A detonation run-up distance database: Data-driven existing models improvement and new model development

Assessing an Experimental Approach for Chemical Explosive Mode and Heat Release Rate Using DNS Data

An Evaluation of Gas-Phase Micro-Mixing Models with Differential Mixing Timescales in Transported PDF Simulations of Sooting Flame DNS

Premixed Flames Subjected to Extreme Turbulence: Some Questions and Recent Answers

A DNS evaluation of mixing and evaporation models for TPDF modelling of nonpremixed spray flames

One-Dimensional Modeling of Turbulent Premixed Jet Flames - Comparison to DNS

The Flame Length Measurements of Oxygen-Enriched Carbon Dioxide-Diluted Methane Inverse Diffusion Flames

Theoretical Prediction Model and Experimental Investigation of Detonation Limits in Combustible Gaseous Mixtures

Experimental study of DDT run-up distance and detonation wave velocity deficit for stoichiometric hydrogen-oxygen mixture in micro spiral channels

A Comparison Between Direct Numerical Simulation and Experiment of the Turbulent Burning Velocity-Related Statistics in a Turbulent Methane-Air Premixed Jet Flame at High Karlovitz Number

Numerical investigation of detonation initiation for low-volatility liquid fuel/air mixtures

Chemical-Diffusive Models for Flame Acceleration and Transition to Detonation: Genetic Algorithm and Optimization Procedure

Ignition Delay Time Measurements and Kinetic Modeling of Methane/diesel Mixtures at Elevated Pressures

Measurement and Relationship Between Critical Tube Diameter and Critical Energy for Direct Blast Initiation of Gaseous Detonations

An Experimental Study of N-Dodecane and the Development of an Improved Kinetic Model

Flame Acceleration and Transition to Detonation in a Pre-/Main-chamber Combustion System

On the Theory and Modelling of Flame Acceleration and Deflagration-to-Detonation Transition

An Experimental Study on the Detonability of Gaseous Hydrocarbon Fuel–oxygen Mixtures in Narrow Channels

Experimental and Numerical Study of Flame Acceleration and DDT in a Channel with Continuous Obstacles

Experimental and simulation study on the combustion characteristics of ammonia/n-dodecane mixtures

CFD Modeling of Reacting Diesel Sprays with Primary Reference Fuel