Abstract:Silicoaluminophosphate molecular sieves (SAPO-41) with different SiO2/Al2O3 ratios were synthesized using di-n-butylamine (DBA) as template. All of the samples were characterized by XRD, SEM, TEM, N2 adsorption, 29Si MAS NMR and IR spectroscopy of adsorbed pyridine. Based on the SAPO-41 molecular sieve, a series of nPd/S41(x) bifunctional catalysts with different SiO2/Al2O3 molar ratios (x = 0.2–0.7) and Pd loadings (n = 0.1–1.0 wt%) were prepared. Their catalytic performance was investigated in n-hexadecane hydroisomerization using a fixed-bed flow reactor system. The influence of the acidity and ratio between the accessible Pd sites and Brønsted acid sites CPdCH+$$\left( {{{{{C}_{{Pd}}}} \mathord{\left/ {\vphantom {{{{C}_{{Pd}}}} {{{C}_{{{H}^{+}}}}}}} \right. \kern-\nulldelimiterspace} {{{C}_{{{H}^{+}}}}}}} \right)$$ on the catalytic performance of the prepared samples was studied by adjusting the composition of the initial gel in the synthesis of SAPO-41 molecular sieves and the Pd loadings during preparation process. The results indicated that the 0.8Pd/S41(0.6) catalyst exhibited excellent catalytic performance due to a suitable acidity, high Pd dispersion and appropriate CPdCH+$${{{{C}_{{Pd}}}} \mathord{\left/ {\vphantom {{{{C}_{{Pd}}}} {{{C}_{{{H}^{+}}}}}}} \right. \kern-\nulldelimiterspace} {{{C}_{{{H}^{+}}}}}}$$ ratio (0.58), which was beneficial for the synergetic effect between the (de)hydrogenating and acid functions of the bifunctional catalyst. The highest iso-hexadecane yield of 89% was obtained at an n-hexadecane conversion of 94% over the 0.8Pd/S41(0.6) catalyst.

Comparative Study of the Dehydrogenation of Decalin on Pd/SiO2, Pd/MCM-48, and Pd/SBA-15 Catalysts

Synthesis of N-(1,3-dimethylbutyl)-N'-Phenyl-p-Phenylenediamine with Diphenyl-Sulfide Modified Pd/C Catalysts

Decalin Dehydrogenation on Active Carbon Supported Pt-Ni Bimetallic Catalysts

Density Functional Theory Study of Decalin Dehydrogenation for Hydrogen Release on Pt(111) and Pt(211)

Isomerization of Alkane on Molecular Sieves Catalyst Loaded with Palladium

Effects of Carbon Support on Microwave-Assisted Catalytic Dehydrogenation of Decalin

Hydrogen production from decalin dehydrogenation over Pt-Ni/C bimetallic catalysts

Catalytic Properties of Supported Pd/SBA-15 Catalyst for Selective Hydrogenation of Alkadienes

Comparative Study on the Hydrogenation of Naphthalene over Both Al2O3-Supported Pd and NiMo Catalysts against a Novel LDH-Derived Ni-MMO-Supported Mo Catalyst

Preparation of highly dispersed Pd/SBA-15 catalysts for dodecahydro-N-ethylcarbazole dehydrogenation reaction by ion exchange-glow discharge

Mesoporous Silica (MCM-41) Containing Dispersed Palladium Nanoparticles as Catalyst for Dehydrogenation, Methanolysis, and Reduction Reactions.

Apparent kinetics of hydrogen production from hydrogen carrier decalin

Carbon Nanotubes Supported Palladium Catalysts for Selective Hydrogenation of Cinnamaldehyde under Atmospheric Pressure

A TPD and XPS investigation of palladium on modified alumina supports used for the catalytic decomposition of methanol

Comparative Studies on Porous Material-Supported Pd Catalysts for Catalytic Oxidation of Benzene, Toluene, and Ethyl Acetate

Microcalorimetric Adsorption and Infrared Spectroscopic Studies of Pd/MgSiO Catalysts for the Hydrogenation of Imines

Tuning the mesopore-acid-metal balance in Pd/HY for efficient deep hydrogenation saturation of naphthalene

Dendrimer-Encapsulated Pd Nanoparticles, Immobilized in Silica Pores, as Catalysts for Selective Hydrogenation of Unsaturated Compounds

Hydrogenation of Cinnamaldehyde Using Carbon Dots Reduced Palladium Nanoparticles

Dehydrogenation of C3-C4 paraffin's to corresponding olefins over slit-SAPO-34 supported Pt-Sn-based novel catalyst

Synergetic effect between the metal and acid sites of Pd/SAPO-41 bifunctional catalysts in n-hexadecane hydroisomerization