Abstract:Purpose: Computational fluid dynamics (CFD) and 4D-flow magnetic resonance imaging (MRI) are synergically used for the simulation and the analysis of the flow in a patient-specific geometry of a healthy thoracic aorta. Methods: CFD simulations are carried out through the open-source code SimVascular. The MRI data are used, first, to provide patient-specific boundary conditions. In particular, the experimentally acquired flow rate waveform is imposed at the inlet, while at the outlets the RCR parameters of the Windkessel model are tuned in order to match the experimentally measured fractions of flow rate exiting each domain outlet during an entire cardiac cycle. Then, the MRI data are used to validate the results of the hemodynamic simulations. As expected, with a rigid-wall model the computed flow rate waveforms at the outlets do not show the time lag respect to the inlet waveform conversely found in MRI data. We therefore evaluate the effect of wall compliance by using a linear elastic model with homogeneous and isotropic properties and changing the value of the Young's modulus. A stochastic analysis based on the polynomial chaos approach is adopted, which allows continuous response surfaces to be obtained in the parameter space starting from a few deterministic simulations. Results: The flow rate waveform can be accurately reproduced by the compliant simulations in the ascending aorta; on the other hand, in the aortic arch and in the descending aorta, the experimental time delay can be matched with low values of the Young's modulus, close to the average value estimated from experiments. However, by decreasing the Young's modulus the underestimation of the peak flow rate becomes more significant. As for the velocity maps, we found a generally good qualitative agreement of simulations with MRI data. The main difference is that the simulations overestimate the extent of reverse flow regions or predict reverse flow when it is absent in the experimental data. Finally, a significant sensitivity to wall compliance of instantaneous shear stresses during large part of the cardiac cycle period is observed; the variability of the time-averaged wall shear stresses remains however very low. Conclusions: In summary, a successful integration of hemodynamic simulations and of MRI data for a patient-specific simulation has been shown. The wall compliance seems to have a significant impact on the numerical predictions; a larger wall elasticity generally improves the agreement with experimental data.

Three-dimensional numeric simulation of flow through an aortic bileaflet valve in a realistic model of aortic root

An Approach for Designing Patient-Specific Prosthetic Aortic Valves Based on CTA Images Using Fluid-Structure Interaction (FSI) Method.

Experimental Study on the Effect of an Artificial Cardiac Valve on the Left Ventricular Flow

Flow through a prosthetic mechanical aortic valve: Numerical model and experimental study

Direct numerical simulation of a 2D-stented aortic heart valve at physiological flow rates

Numerical simulation of hemodynamics frameless aortic valve bioprosthesis

Advancing aortic stenosis assessment: validation of fluid-structure interaction models against 4D flow MRI data

Image-based immersed boundary model of the aortic root

The Influence of the Aortic Root Geometry on Flow Characteristics of a Bileaflet Mechanical Heart Valve

Fluid–structure interaction analysis of a healthy aortic valve and its surrounding haemodynamics

Experimental investigation of the flow downstream of a dysfunctional bileaflet mechanical aortic valve

A design-based model of the aortic valve for fluid-structure interaction

Validation of Numerical Simulations of Thoracic Aorta Hemodynamics: Comparison with In Vivo Measurements and Stochastic Sensitivity Analysis

Simulation of transcatheter aortic valve implantation through patient-specific finite element analysis: Two clinical cases

A reduced 3D-0D FSI model of the aortic valve including leaflets curvature

Pledget-Armed Sutures Affect the Haemodynamic Performance of Biologic Aortic Valve Substitutes: A Preliminary Experimental and Computational Study

Study of Biomechanics of the Heart Valve Leaflet Apparatus Using Numerical Simulation Method

An Anatomically Shaped Mitral Valve for Hemodynamic Testing

Cardiac hemodynamics computational modeling including chordae tendineae, papillaries, and valves dynamics

A novel formulation for the study of the ascending aortic fluid dynamics with in vivo data

On the Modeling of Patient-Specific Transcatheter Aortic Valve Replacement: A Fluid–Structure Interaction Approach