Abstract:Journal of Industrial Textiles, Volume 54, Issue , January-December 2024. Gas sensors based on ZnO nanocomposites have been widely investigated for the detection of various gases. However, few studies have reported electrospun ZnO for NOx gases, especially NO (nitrogen monoxide), due to its high tendency for oxidation upon contact with air. The development of gas sensors that operate at temperatures below 300°C is challenging for metal oxide gas sensors, as decreasing the temperature can lead to lack of sensitivity and very long recovery times. In this study, the operating temperature was improved to 200°C while achieving a high response to a low concentration of 0.5 ppm gas, with recovery times of 572s and 105s for NO and NO2 (nitrogen dioxide), respectively. Detecting NO and NO2 at low ppm and ppb levels is a major demand and challenge for the development of metal oxide-based gas sensors, especially for health monitoring portable sensors. This study focuses on the design and performance of a NOx gas sensor based on ZnO nanofibrous material with precise structural optimization. The study optimizes the precursor for electrospinning without using any additives. The sensing materials proportion were optimized by changing the ratio of ZnAc:PVA in the precursor of electrospinning solution. Choosing ZnAc:PVA = 1.5 as the optimum precursor for synthesizing ZnO nanofibers resulted in the highest response of 27 and 16 (Ohm/Ohm) for 0.5 ppm NO and NO2, respectively, at 200°C and relative humidity of 50%. Additionally, reproducible sensors were developed, which is crucial for mass production. This remarkable sensitivity in low concentration indicates that the design of material structure and the control of zinc acetate amount in the electrospun solution has great practical applications to detect both gases.

An Investigation on the Acetone and Ethanol Vapor-Sensing Behavior of Sol-Gel Electrospun ZnO Nanofibers Using an Indigenous Setup

Zinc oxide-based sensor prepared by modified sol-gel route for detection of low concentrations of ethanol, methanol, acetone, and formaldehyde

Sol–gel spin coating assisted room temperature operated nanostructured ZnO ethanol sensor with behavior transformation

Understanding the Interplay of solution and process parameters on the physico-chemical properties of ZnO nanofibers synthesized by sol-gel electrospinning

High Performance Gas Sensors Based on In-Situ Fabricated ZnO/polyaniline Nanocomposite: the Effect of Morphology on the Sensing Properties

Broad-class volatile organic compounds (VOCs) detection via polyaniline/zinc oxide (PANI/ZnO) composite materials as gas sensor application

Acetone sensing performance of ZnFe2O4/ZnO/g-C3N4 composites: morphology, structure and charge transfer

Recent progress and perspectives of gas sensors based on vertically oriented ZnO nanomaterials

Versatile Gas Sensing at Room Temperature: Facile Fabrication of a PANI-PB-ZnO Hybrid Nanocomposite for Detecting Ammonia, Acetone, and Ethanol

NiO–ZnO Nanoheterojunction Networks for Room‐Temperature Volatile Organic Compounds Sensing

Oxygen Vacancies Enriched Zn2SnO4 for Aliphatic Alcohol Sensing and Enhanced Selectivity towards n-Butanol

Transformation of zinc acetate into ZnO nanofibers for enhanced NOx gas sensing: Cost-effective strategies and additive-free optimization

Synthesis of NiO-SnO2 cauliflower-like gas sensor material using a facile hydrothermal method for acetone detection

Autocombustion Route Derived Zinc Ferrite Nanoparticles as Chemiresistive Sensor for Detection of Alcohol Vapors

NO2 and NH3 detection using work function measurement of solvothermal synthesised ZnO–NiO nanocomposites: a case study

Gas Sensor Based on ZnO Nanostructured Film for the Detection of Ethanol Vapor

MOF-based nanoscale Pt catalyst decorated SnO2 porous nanofibers for acetone gas detection

Toward a Highly Functional Hybrid ZnO Nanofiber–rGO Gas Sensor

Efficient acetone sensing utilizing Co3O4-Embedded porous ZnO nanofibers

Wide-range ethanol sensor based on a spray-deposited nanostructured ZnO and Sn–doped ZnO films

Electrospun SnO2/WO3 Heterostructure Nanocomposite Fiber for Enhanced Acetone Vapor Detection