Abstract:Bismuth (Bi) is a promising anode candidate for sodium ion batteries (SIBs) with a high volumetric capacity (3765 mA h cm-3) and moderate working potential but suffers from large volume change (ca. 250%) during the sodiation/desodiation process, resulting in pulverization of the electrode, electrical contact loss, excessive accumulation of solid electrolyte interfaces, etc., devastating the cycling stability of the electrode seriously. Addressing this issue significantly relies on rational micro- and nano-structuring. Herein, we prepared a 3D multi-layered composite assembly of Bi/carbon heterojunctions with 0D bismuth nanospheres distributed and anchored on 2D nitrogen-doped carbon nanosheets (NCSs), using a preorganization strategy by taking full advantage of the strong complexation ability of Bi3+. The multi-layered composite assembly is periodic and close-packed, with Bi nanospheres <25 nm, carbon nanosheets ∼30 nm, and an average interlayer space of ∼75 nm. Such a specific architecture provides abundant electrochemically active surfaces and ion migration channels as the Bi nanospheres are attached to the 2D nitrogen-doped carbon nanosheets via a point-to-surface pattern. Moreover, the mono-layer Bi nanospheres oriented along the 2D-surface of NCSs are kinetically favorable for the recognition of Na+ by the active sites of Bi nanospheres as well as for avoiding the long distance migration of Na+ (external diffusion of Na+). Furthermore, thermodynamically, the small size and high surface energy of ultrasmall Bi nanospheres could contribute to high ion mobility (internal diffusion of Na+) and promote electrochemical reactions as well. The multi-layered composite assembly of Bi@NCSs (ML-Bi@NCSs) not only provides a robust 3D framework guaranteeing the whole structural stability but also ensures direct and full contact of each active nano-building block with electrolyte, thereby forming a high-throughput electron/ion transport system. When evaluated as the anode for SIBs, ML-Bi@NCSs deliver superior high-rate capability up to 30 A g-1 (specific capacity: 288 mA h g-1) and long-term cycling stability (capacity retention: 95.8% after 5000 cycles at 10 A g-1 and 90.6% after 10 000 cycles at 20 A g-1, respectively).

Realizing Ultrahigh Cycle Life Anode for Sodium-Ion Batteries through Heterostructure Design and Introducing Electro Active Polymer Coating

Rayleigh-Instability-Induced Bismuth Nanorod@Nitrogen-Doped Carbon Nanotubes As A Long Cycling and High Rate Anode for Sodium-Ion Batteries

Rational Design of Moo2−Based Electrodes by Crystal Surface Engineering Control for Ultra-Long Life Sodium Ion Batteries

Bismuth-constructed high-speed channeled for Bi/Sb 2 SnO 5 @PCFs composite as high-rate and long-life anode for sodium-ion batteries

Construction of a novel heterostructure of Bi2S3/Sb2S3 nanorod with improved sodium storage performances

A Multi-Layered Composite Assembly of Bi Nanospheres Anchored on Nitrogen-Doped Carbon Nanosheets for Ultrastable Sodium Storage

In Situ Encapsulation of MoS x Se 2– x Nanocrystals with the Synergistic Function of Anion Doping and Physical Confinement with Chemical Bonding for High-Performance Sodium/Potassium-Ion Batteries with Wide Temperature Workability

Polypyrrole-Encapsulated Amorphous Bi2S3 Hollow Sphere for Long Life Sodium Ion Battery and Lithium-Sulfur Battery

Constructing Bi2Se3/Bi2O3 heterostructure as promising anode for efficient sodium-ion storage

Heterostructured NiS 2 @sns 2 Hollow Spheres As Superior High-Rate and Durable Anodes for Sodium-Ion Batteries

Achieving High-Capacity and Long-Life K+ Storage Enabled by Constructing Yolk-Shell Sb2S3@N, S-doped Carbon Nanorod Anodes

Molybdenum Phosphide: A Conversion-type Anode for Ultralong-Life Sodium-Ion Batteries

Hierarchical Encapsulation and Rich sp2 N Assist Sb2Se3‐Based Conversion‐Alloying Anode for Long‐Life Sodium‐ and Potassium‐ion Storage

Structural Engineering of SnS2Encapsulated in Carbon Nanoboxes for High-Performance Sodium/Potassium-Ion Batteries Anodes

Multiple heteroatoms co-doped carbon layers coupled with Janus sulfides (CoS2@NPSC@MoS2) for super Na+/K+ storage

Toward Ultrahigh Rate and Cycling Performance of Cathode Materials of Sodium Ion Battery by Introducing a Bicontinuous Porous Structure

Construction of cobalt sulfide/molybdenum disulfide heterostructure as the anode material for sodium ion batteries

Exploration of electrochemical behavior of Sb-based porous carbon composites anode for sodium-ion batteries

Synergistic Bimetallic Effects of BiSb Anodes Enable Long‐Stable Sodium Storage

Metal-Semiconductor Phase Twinned Hierarchical MoS<sub>2</sub> Nanowires with Expanded Interlayers for Sodium-Ion Batteries with Ultralong Cycle Life

Polypyrrole-coated sodium manganate microspheres cathode for superior performance Sodium-ion batteries