Abstract:Background: The ability to measure joint kinematics in natural environments over long durations using inertial measurement units (IMUs) could enable at-home monitoring and personalized treatment of neurological and musculoskeletal disorders. However, drift, or the accumulation of error over time, inhibits the accurate measurement of movement over long durations. We sought to develop an open-source workflow to estimate lower extremity joint kinematics from IMU data that was accurate and capable of assessing and mitigating drift. Methods: We computed IMU-based estimates of kinematics using sensor fusion and an inverse kinematics approach with a constrained biomechanical model. We measured kinematics for 11 subjects as they performed two 10-min trials: walking and a repeated sequence of varied lower-extremity movements. To validate the approach, we compared the joint angles computed with IMU orientations to the joint angles computed from optical motion capture using root mean square (RMS) difference and Pearson correlations, and estimated drift using a linear regression on each subject's RMS differences over time. Results: IMU-based kinematic estimates agreed with optical motion capture; median RMS differences over all subjects and all minutes were between 3 and 6 degrees for all joint angles except hip rotation and correlation coefficients were moderate to strong (r = 0.60-0.87). We observed minimal drift in the RMS differences over 10 min; the average slopes of the linear fits to these data were near zero (- 0.14-0.17 deg/min). Conclusions: Our workflow produced joint kinematics consistent with those estimated by optical motion capture, and could mitigate kinematic drift even in the trials of continuous walking without rest, which may obviate the need for explicit sensor recalibration (e.g. sitting or standing still for a few seconds or zero-velocity updates) used in current drift-mitigation approaches when studying similar activities. This could enable long-duration measurements, bringing the field one step closer to estimating kinematics in natural environments.

Kinematic measurements using an infrared sensor

Using infrared sensors for distance measurement in mobile robots

ISB recommendations on the definition, estimation, and reporting of joint kinematics in human motion analysis applications using wearable inertial measurement technology

Wrist angle measurements using soft sensors

A Novel Method to Estimate the Full Knee Joint Kinematics Using Low Cost IMU Sensors for Easy to Implement Low Cost Diagnostics

Infrared Thermography Sensor for Temperature and Speed Measurement of Moving Material

High Dynamic-Range Motion Imaging Based on Linearized Doppler Radar Sensor

OpenSense: An open-source toolbox for inertial-measurement-unit-based measurement of lower extremity kinematics over long durations

Low-Cost Portable System for Measurement and Representation of 3D Kinematic Parameters in Sport Monitoring: Discus Throwing as a Case Study

A Method for Measuring Contact Points in Human-Object Interaction Utilizing Infrared Cameras

Flight Controller as a Low-Cost IMU Sensor for Human Motion Measurement

Real-Time Kinematics Measurement of Human Lower-Limb Underwater Motions Based on Inertial Units.

A Learning-Based Approach for Estimating Inertial Properties of Unknown Objects from Encoder Discrepancies

Viability of Low-Cost Infrared Sensors for Short Range Tracking

Feasibility of Tracking Human Kinematics with Simultaneous Localization and Mapping (SLAM)

Generation of Accurate Translational Motion for Testing Inertial Sensors

A Real-Time Articulated Human Motion Tracking Using Tri-Axis Inertial/magnetic Sensors Package.

Inertial Sensors for Human Motion Analysis: A Comprehensive Review

Open-source software library for real-time inertial measurement unit data-based inverse kinematics using OpenSim

IMU-Based Joint Angle Measurement for Gait Analysis

A Method for Measuring the Inertia Properties of a Rigid Body Using 3-URU Parallel Mechanism