Abstract:Tandem solar cells are one of the fastest‐growing PV technology, since, it efficiently overcomes the thermalization and non‐absorption losses. However, appropriate absorber materials with suitable bandgaps are required to design an efficient tandem solar cell. In this context, the present research paper brings forth the results of simulation‐based studies carried out on thin‐film/CQD based 2‐T monolithic tandem solar cell that can be processed easily at a reduced cost. The device has been designed using a‐Si: H of wide bandgap (1.7eV) as top cell and PbS CQD of narrow bandgap (1.2eV) as the bottom cell. The feasibility of the proposed design is investigated in two steps. Initially, top and bottom subcell are designed and calibrated to have state of the art conversion efficiency of 6.86% and 9.38%, respectively in accordance with the previous literature. Afterwards, the bottom cell is inverted to get the desired direction of electron flow in accordance with the top cell. The thickness of the inverted bottom cell has been optimized as 200 nm so as to obtain 8.34% efficiency. Standalone condition reflected JSC and VOC of 9.97 mA.cm−2 and 0.91 V in top cell, and 21.28 mA.cm−2 and 0.63 V in the bottom cell. Further, both the top and bottom subcells are evaluated for tandem configuration with the help of ITO based interlayer to provide the current matching conditions. In the proposed tandem design, the thickness of the absorber layers is optimized to achieve the highest JSC, which is indeed limited by the top cell owing to lower JSC value of 10.61 mA.cm−2 in standalone condition. Optimized tandem design with 200 nm/150 nm thick absorber layer based top/bottom subcell resulted in JSC of 10.52 mA.cm−2, VOC of 1.59 V, FF of 71.65% and PCE of 12.02%.This article is protected by copyright. All rights reserved.

A Silicon-Singlet Fission Parallel Tandem Solar Cell Exceeding 100 % External Quantum Efficiency

A Silicon–Singlet Fission Tandem Solar Cell Exceeding 100% External Quantum Efficiency with High Spectral Stability

Perovskite/Colloidal Quantum Dot Tandem Solar Cells: Theoretical Modeling and Monolithic Structure

Toward high-efficiency solution-processed tandem solar cells

Si Solid-State Quantum Dot-Based Materials for Tandem Solar Cells.

Exciton Fission Enhanced Silicon Solar Cell

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

External Quantum Efficiency Above 100% in a Singlet-Exciton-Fission–Based Organic Photovoltaic Cell

Monolithic Perovskite/si Tandem Solar Cells Exceeding 22% Efficiency Via Optimizing Top Cell Absorber

High Efficient Solar Cell Based on Heterostructure Constructed by Graphene and GaAs Quantum Wells

Monolithic Perovskite–Perovskite–Silicon Triple-Junction Tandem Solar Cell with an Efficiency of over 20%

Singlet Fission: Progress and Prospects in Solar Cells

Device Simulation of Quasi-Two-dimensional Perovskite/silicon Tandem Solar Cells Towards 30%-Efficiency

An Efficient Triple-Junction Polymer Solar Cell Having A Power Conversion Efficiency Exceeding 11%

The Potential of Singlet Fission Photon Multipliers as an Alternative to Silicon-Based Tandem Solar Cells

Bifacial Si Heterojunction-Perovskite Organic-Inorganic Tandem to Produce Highly Efficient Solar Cell

Monolithic perovskite/silicon tandem solar cell with >29% efficiency by enhanced hole extraction

Design and Simulation of a‐Si:H/PbS Colloidal Quantum Dots Monolithic Tandem Solar Cell for 12% Efficiency

Realistic Efficiency Limits for Singlet-Fission Silicon Solar Cells

Silicon Quantum Dot Luminescent Solar Concentrators and Downshifters with Antireflection Coatings for Enhancing Perovskite Solar Cell Performance

Singlet Fission in Pentacene Through Multi-Exciton Quantum States