Abstract:Digital correlated double sampling (DCDS), a readout technique for charge-coupled devices (CCD), is gaining popularity in astronomical applications. By using an oversampling ADC and a digital filter, a DCDS system can achieve a better performance than traditional analogue readout techniques at the expense of a more complex system analysis. Several attempts to analyse and optimize a DCDS system have been reported, but most of the work presented in the literature has been experimental. Some approximate analytical tools have been presented for independent parameters of the system, but the overall performance and trade-offs have not been yet modelled. Furthermore, there is disagreement among experimental results that cannot be explained by the analytical tools available. In this work, a theoretical analysis of a generic DCDS readout system is presented, including key aspects such as the signal conditioning stage, the ADC resolution, the sampling frequency and the digital filter implementation. By using a time-domain noise model, the effect of the digital filter is properly modelled as a discrete-time process, thus avoiding the imprecision of continuous-time approximations that have been used so far. As a result, an accurate, closed-form expression for the signal-to-noise ratio at the output of the readout system is reached. This expression can be easily optimized in order to meet a set of specifications for a given CCD, thus providing a systematic design methodology for an optimal readout system. Simulated results are presented to validate the theory, obtained with both time- and frequency-domain noise generation models for completeness.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is how to optimize the read - out system of Charge - Coupled Device (CCD) through Digital Correlated Double Sampling (DCDS) technology in astronomical applications to improve its performance. Specifically, the paper focuses on the following aspects: 1. **Limitations of Existing Technologies**: Traditional analog read - out technologies have limitations in reducing noise. Especially in low - light conditions, read - out noise becomes the main factor limiting the performance of CCD. The DCDS technology can overcome these limitations to a certain extent by using oversampling Analog - to - Digital Converters (ADCs) and digital filters, but it requires more complex system analysis. 2. **Lack of Theoretical Analysis**: Although there have been experimental studies attempting to analyze and optimize DCDS systems, most of the work is experimental. There is a lack of a comprehensive theoretical framework to explain the inconsistencies among experimental results and to provide systematic design methods. 3. **Modeling of System Performance**: The paper aims to establish a general theoretical model of the DCDS read - out system, including aspects such as the signal conditioning stage, ADC resolution, sampling frequency, and digital filter implementation. Through the time - domain noise model, the influence of the digital filter is accurately modeled, thus avoiding the inaccuracy of continuous - time approximation. 4. **Performance Optimization**: Based on the above - mentioned theoretical model, the paper derives a closed - form Signal - to - Noise Ratio (SNR) expression, which can be optimized for a specific CCD to meet a given set of specification requirements. This provides a systematic methodology for designing the optimal read - out system. 5. **Verification and Application**: The validity of the theoretical model is verified through simulation results, demonstrating the potential of this method in practical applications. The simulation results include time - domain and frequency - domain noise generation models to ensure the integrity of the results. In summary, the goal of this paper is to provide a systematic design methodology through theoretical analysis and optimization methods to improve the performance of the DCDS read - out system, especially for applications in low - light conditions.

Optimal CCD readout by digital correlated double sampling