Abstract:Abstract Most controllers concerning lateral stability and rollover prevention for autonomous vehicles are designed separately and used simultaneously. However, roll motion influences lateral stability in cornering maneuvers, especially at high speed. Typical rollover prevention control stabilizes the vehicle with differential braking to create an understeering condition. Although this method can prevent rollover, it can also lead to deviation from a reference path specified for an autonomous vehicle. This contribution proposes and implements a coupled longitudinal and lateral controller for path tracking via model predictive control (MPC) to simultaneously enforce constraints on control input, state output, lateral stability, and rollover prevention. To demonstrate the approach in simulation, an 8 degrees of freedom (DOF) vehicle model is used as the MPC prediction model, and a high-fidelity 14-DOF model as the plant. The MPC-based lateral control generates a sequence of optimal steering angles, while a PID speed controller adjusts the driving or braking torque. The lateral stability envelope is determined by the phase plane of yaw rate and lateral velocity, while the roll angle threshold is derived from the load transfer ratio (LTR) and tire vertical force under the condition of quasi-steady-state rollover. To track the desired trajectory as fast as possible, a minimum-time velocity profile is determined using a forward-backward integration approach, subject to tire friction limit constraints. We demonstrate the approach in simulation, by having the vehicle track an arbitrary course of continuously varying curvature thus highlighting the accuracy of the controller and its ability to satisfy lateral and roll stability requirements. The MATLAB® code for the 8-DOF and 14-DOF vehicle models, along with the implementation of the proposed controller are available as open source in the public domain.

Pulse-Width Predictive Control for LTV Systems with Application to Spacecraft Rendezvous

Fast Linear Parameter Varying Model Predictive Control of Buck DC-DC Converters Based on FPGA.

Model Predictive Control in Spacecraft Rendezvous and Soft Docking

SE(3) Based LTV-MPC Algorithm for Multi-Obstacle Trajectory Tracking of Fully Driven Spacecraft

Lebesgue-Approximation Model Predictive Control of Nonlinear Sampled-Data Systems

Convex MPC and Thrust Allocation with Deadband for Spacecraft Rendezvous

MPC for Tracking applied to rendezvous with non-cooperative tumbling targets ensuring stability and feasibility

Adaptive and Efficient Model Predictive Control for Booster Reentry

Fixed-time Constrained Model Predictive Sliding mode Control of Spacecraft Simulator

Real-time implementation of MPC for tracking in embedded systems: Application to a two-wheeled inverted pendulum

LTV-MPC Approach for Automated Vehicle Path Following at the Limit of Handling

Fixed-point constrained Model Predictive Control of spacecraft attitude

Electric Satellite Station Keeping, Attitude Control, and Momentum Management by MPC

Horizon-wise Model Predictive Control with Application to Autonomous Driving Vehicle

Model Predictive Control to Autonomously Approach a Failed Spacecraft

Real time optimal guidance of low-thrust spacecraft: an application of nonlinear model predictive control

Hardware in the Loop Simulation for Model Predictive Control Applied to Satellite Attitude Control

Coupled Lateral and Longitudinal Control for Trajectory Tracking, Lateral Stability, and Rollover Prevention of High-Speed Automated Vehicles Using Minimum-Time Model Predictive Control

Local Stability and Convergence of Unconstrained Model Predictive Control

Research for Nonlinear Model Predictive Controls to Laterally Control Unmanned Vehicle Trajectory Tracking

Wind Turbine Structural Load Reduction by Linear Single Model Predictive Control