Abstract:Multiferroic bismuth ferrite (BiFeO3, BFO) is one of the most promising high-temperature ferroelectric and piezoelectric materials due to a high Curie temperature (TC ∼ 825 °C) if the enhancement of ferroelectricity and piezoelectricity can be realized. Unfortunately, it is difficult to adequately pole BFO ceramics due to a high coercive field as well as a high leakage current. Here we investigated the defect dipole-induced poling characteristics and the ferroelectric properties of four kinds of A or/and B-doped BFO ceramics (i.e. BiFeO3, Bi0.95Sm0.05FeO3, BiFe0.95Sc0.05O3, and Bi0.95Sm0.05Fe0.95Sc0.05O3) using a modified quenching technique. The piezoelectric effect is determined by the poling condition, and moreover the poling behavior is strongly dependent on the ion substitution types of BFO ceramics. An enhanced piezoelectric property (d33 = 46–51 pC N−1) can be attained without the involvement of a phase boundary. Specifically, the doping with Sm (Bi0.95Sm0.05FeO3) can cause an obvious threshold during poling, and additionally Bi0.95Sm0.05FeO3 and Bi0.95Sm0.05Fe0.95Sc0.05O3 components can be curiously adequately poled below the coercive field at the poling temperature of 100 °C. In addition, the saturated P–E loops with an obvious internal bias field (Ei) were observed, where Ei was induced by defect dipoles , and then defect dipoles may be decoupled at 120 °C and 6 kV mm−1 (DC field), resulting in a cyclical poling current. It is of great interest to note that an enhanced remanent polarization (2Pr ∼ 50–60 μC cm−2) of the ceramics is obtained, and especially the internal bias fields can be alleviated by AC-cycling or decreasing the measurement frequency. Finally, we believe that our research will have a significant importance in the improvement of piezoelectricity of BFO-based ceramics.

Anomalous change in leakage and displacement currents after electrical poling on lead-free ferroelectric ceramics

Phase Field Simulations of the Poling Process and Nonlinear Behavior of Ferroelectric Polycrystals with Semiconducting Grain Boundaries

Poling-induced Inverse Time-Dependent Microstrain Mechanisms and Post-Poling Relaxation in Bismuth Ferrite

Mesophase Induced by Alternating-Current Poling in Relaxor Ferroelectric Single Crystals

Effect of Poling Temperature on Piezoelectricity of Cazro3-Modified (K, Na)Nbo3-Based Lead-Free Ceramics

Ferroelectric 90° Domain Evaluation in Tetragonal Pb(Mg1/3Nb2/3)O3–PbTiO3 Ceramics

Poling induced changes in polarization domain structure of polymer ferroelectrics for application in organic thin film transistors

Electrical Poling below Coercive Field for Large Piezoelectricity

Enhanced piezoelectricity in 0.7BiFeO3-0.3BaTiO3 lead-free ceramics: Distinct effect of poling engineering

Electric-field-induced phase transition of oriented Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals

Ferroelectric Anomaly of Perovskite Layer Structured Pb2+‐doped Sr2Nb2O7 Ceramics

Domain Switching and Microcracking During Poling of Lead Zirconate Titanate Ceramics

Impact of Alternating Current Electric Field Poling on Piezoelectric and Dielectric Properties of Pb(In1/2Nb1/2)O3-Pb(Mg1/3Nb< Sub>2/3)o3-Pbtio3 Ferroelectric Crystals

Enhanced electrocaloric effect in lead-free NBT-based ceramics

Hysteresis Measurements of Lead-Free Ferroelectric Ceramics Bnbk79 (bi0.5na0.5) Tio3-(Bi0.5k0.5) Tio3-Batio3

Defect dipole-induced poling characteristics and ferroelectricity of quenched bismuth ferrite-based ceramics

In-situ domain structure characterization of Pb(Mg1/3Nb2/3)O3-PbTiO3 crystals under alternating current electric field poling

Low-electric-field-induced high electrocaloric properties via defect regulation in samarium-doped BaTiO 3 ceramics

Double Polarization Hysteresis and Dramatic Influence of Small Compositional Variations on the Electrical Properties in Bi4Ti3O12 Ceramics

Poling Effects of Piezoelectric Properties of Modified BCZT Ceramics with High Piezoelectric Performance

Unique Single-Domain State in A Polycrystalline Ferroelectric Ceramic