Quantum interference is most important for postselected weak measurement

Wang Tao,Gang Li

DOI: https://doi.org/10.48550/arXiv.1509.03224

2017-01-12

Abstract:A general explanation for postselected weak measurement is given and quantum interference is most important.

Quantum Physics

What problem does this paper attempt to address?

Enhancement of the Quantum Coherence of the Rydberg Atoms System by Weak Measurement

Qi Chen,Jing-Bo Xu

DOI: https://doi.org/10.1002/andp.202000463

2021-01-01

Annalen der Physik

Abstract:The influence of weak measurement along with quantum measurement reversal on the Rydberg atoms system is investigated, and is found to have an important practical significance as both weak measurement along with quantum measurement reversal and Rydberg atoms system can be experimentally realized. The quantum coherence and the entropic uncertainty relation of the system are explored, and it is found that the quantum coherence of the system is enhanced and the values of uncertainty and the uncertainty bound are reduced under some particular weak measurements along with quantum measurement reversals. This indicates that the decoherence effect of the system can be weakened by weak measurement along with quantum measurement reversal. Furthermore, the trace distance which is a reflection of the entanglement is also examined, and it is shown that weak measurement along with quantum measurement reversal can improve the entanglement of the system.
Influence of Weak Measurement on Uncertainty Relations in a Quantum Dissipative System

Guo-Qing Zhang,Jing-Bo Xu

DOI: https://doi.org/10.1364/josab.36.000205

2019-01-01

Abstract:We investigate the influence of weak measurement on the quantum-memory-assisted entropic uncertainty relation and quantum speed limit time in a quantum dissipative system by making use of the hierarchical equations of motion method. It is demonstrated that the weak measurement and measurement reversal can suppress the entropic uncertainty during the evolution of the system, and we find a periodical crossover of the quantum speed limit time for different weak measurement strengths, which disappears when increasing the coupling strength. Similar influence of the weak measurement on uncertainty relations is then explored at the finite temperature. We also consider the effect of the counter-rotating-wave term and show that the rotating-wave approximation is an applicable approximation when studying quantum speed limit time but not appropriate when investigating the quantum-memory-assisted entropic uncertainty relation. (C) 2019 Optical Society of America
Weak Measurement with Orthogonal Preselection and Postselection

Shengshi Pang,Shengjun Wu,Zeng-Bing Chen

DOI: https://doi.org/10.1103/physreva.86.022112

IF: 2.971

2012-01-01

Physical Review A

Abstract:Weak measurement is a novel quantum measurement scheme, which is usually characterized by the weak value formalism. To guarantee the validity of the weak value formalism, the fidelity between the preselection and the postselection should not be too small generally. In this work, we study the weak measurement on a qubit system with exactly or asymptotically orthogonal pre- and postselections. We shall establish a general rigorous framework for the weak measurement beyond the weak value formalism, and obtain the average output of a weak measurement when the pre- and postselections are exactly orthogonal. We shall also study the asymptotic behavior of a weak measurement in the limiting process that the pre- and postselections tend to be orthogonal.
Quantum Measurements with Preselection and Postselection

Xuanmin Zhu,Yuxiang Zhang,Shengshi Pang,Chang Qiao,Quanhui Liu,Shengjun Wu

DOI: https://doi.org/10.1103/physreva.84.052111

2011-01-01

Abstract:We study quantum measurement with preselection and postselection, and derive the precise expressions of the measurement results without any restriction on the coupling strength between the system and the measuring device. For a qubit system, we derive the maximum pointer shifts by choosing appropriate initial and finial states. A significant amplification effect is obtained when the interaction between the system and the measuring device is very weak, and typical ideal quantum measurement results are obtained when the interaction is strong. The improvement of the signal-tonoise ratio (SNR) and the enhancement of the measurement sensitivity (MS) by weak measurements are studied. Without considering the probability decrease due to postselection, the SNR and the MS can be both significantly improved by weak measurements; however, neither SNR nor MS can be effectively improved when the probability decrease is considered.
Weak values could reveal the hidden effects of quantum interactions

Miao Zhang

DOI: https://doi.org/10.48550/arXiv.1501.05537

2015-01-22

Quantum Physics

Abstract:Due to the reduced probability of successful post-selection, the weak-value amplification seems to be unavailable for the parameter-estimation. Here, we show theoretically that, some effects due to the weak interactions present only in the properly post-selected sub-ensemble, however are canceled by themselves in the total ensemble. From this point of view, the post-selection induced weak value could be one of the feasible methods for measuring the weak interaction, since the standard measurement does not work. Additionally, we employ the system of trapped ions to simulate the weak measurement and calculate relevant results without the frequently-used weak interaction approximation.
Quantum to Classical Transitions via Weak Measurements and Post-Selection

Eliahu Cohen,Yakir Aharonov

DOI: https://doi.org/10.1142/9781786341419_0012

2016-02-24

Abstract:This work will incorporate a few related tools for addressing the conceptual difficulties arising from sewing together classical and quantum mechanics: deterministic operators, weak measurements and post-selection. Weak Measurement, based on a very weak von Neumann coupling, is a unique kind of quantum measurement with numerous theoretical and practical applications. In contrast to other measurement techniques, it allows to gather a small amount of information regarding the quantum system, with only a negligible probability of collapsing it. A single weak measurement yields an almost random outcome, but when performed repeatedly over a large ensemble, the averaged outcome becomes increasingly robust and accurate. Importantly, a long sequence of weak measurements can be thought of as a single projective measurement. I claim in this work that classical variables appearing in the macro-world, such as centre of mass, moment of inertia, pressure and average forces, result from a multitude of quantum weak measurements performed in the micro-world. Here again, the quantum outcomes are highly uncertain, but the law of large numbers obliges their convergence to the definite quantities we know from our everyday lives. By augmenting this description with a final boundary condition and employing the notion of "classical robustness under time-reversal" I will draw a quantitative borderline between the classical and quantum regimes. I will conclude by analyzing the role of macroscopic systems in amplifying and recording quantum outcomes.

Quantum Physics
Advantage of quantum coherence in postselected metrology

Shao-Jie Xiong,Peng-Fei Wei,Huang-Qiu-Chen Wang,Lei Shao,Yong-Nan Sun,Jing Liu,Zhe Sun,Xiao-Guang Wang

DOI: https://doi.org/10.48550/arxiv.2212.05285

2022-01-01

Abstract: In conventional measurement, to reach the greatest accuracy of parameter estimation, all samples must be measured since each independent sample contains the same quantum Fisher information. In postselected metrology, postselection can concentrate the quantum Fisher information of the initial samples into a tiny post-selected sub-ensemble. It has been proven that this quantum advantage can not be realized in any classically commuting theory. In this work, we present that the advantage of postselection in weak value amplification (WVA) can not be achieved without quantum coherence. The quantum coherence of the initial system is closely related to the preparation costs and measurement costs in parameter estimation. With the increase of initial quantum coherence, the joint values of preparation costs and measurement costs can be optimized to smaller. Moreover, we derive an analytical tradeoff relation between the preparation, measurement and the quantum coherence. We further experimentally test the tradeoff relation in a linear optical setup. The experimental and theoretical results are in good agreement and show that the quantum coherence plays a key role in bounding the resource costs in the postselected metrology process.
Application of the Weak-Measurement Technique to Study Atom-Vacuum Interactions

M. Zhang,S. Y. Zhu

DOI: https://doi.org/10.1103/physreva.92.043825

IF: 2.971

2015-01-01

Physical Review A

Abstract:Quantum weak measurement has attracted much interest recently [J. Dressel et al., Rev. Mod. Phys. 86, 307 (2014)] because it could amplify some weak signals and provide a technique to observe nonclassical phenomena. Here, we apply this technique to study the interaction between the free atoms and the vacuum in a cavity. Due to the gradient field in the vacuum cavity, the external orbital motions and the internal electronic states of atoms can be weakly coupled via the atom-field electric-dipole interaction. We show that, within the properly postselected internal states, the weak atom-vacuum interaction could generate a large change to the external motions of atoms due to the postselection-induced weak values.
Weak and Strong Measurement of a Qubit Using a Switching-Based Detector

S. Ashhab,J. Q. You,Franco Nori

DOI: https://doi.org/10.1103/physreva.79.032317

2009-01-01

Abstract:We analyze the operation of a switching-based detector that probes a qubit's observable that does not commute with the qubit's Hamiltonian, leading to a nontrivial interplay between the measurement and free-qubit dynamics. In order to obtain analytical results and develop intuitive understanding of the different possible regimes of operation, we use a theoretical model where the detector is a quantum two-level system that is constantly monitored by a macroscopic system. We analyze how to interpret the outcome of the measurement and how the state of the qubit evolves while it is measured. We find that the answers to the above questions depend on the relation between the different parameters in the problem. In addition to the traditional strong-measurement regime, we identify a number of regimes associated with weak qubit-detector coupling. An incoherent detector whose switching time is measurable with high accuracy can provide high-fidelity information, but the measurement basis is determined only upon switching of the detector. An incoherent detector whose switching time can be known only with low accuracy provides a measurement in the qubit's energy eigenbasis with reduced measurement fidelity. A coherent detector measures the qubit in its energy eigenbasis and, under certain conditions, can provide high-fidelity information.
State distinguishability under weak measurement and post-selection: A unified system and device perspective

Philipp Stammer

DOI: https://doi.org/10.1103/PhysRevA.102.062206

2020-12-07

Abstract:We quantify the disturbance of a quantum state undergoing a sequence of observations, and particularly focus on a weak measurement followed by post-selection and compare these results to the projective counterpart. Taking into account the distinguishability of both, the system and the device, we obtain the exact trade-off between the system state disturbance and the change of the device pointer state. We show that for particular post-selection procedures the coupling strength between the system and the device can be significantly reduced without loosing measurement sensitivity, which is directly transferred to a reduced state disturbance of the system. We observe that a weak measurement alone does not provide this advantage but only in combination with post-selection a significant improvement in terms of increased measurement sensitivity and reduced state disturbance is found. We further show that under realistic experimental conditions this state disturbance is small, whereas the exact post-selection probability is considerably larger than the approximate value given by the overlap of the initial and final state when neglecting the system state disturbance.

Quantum Physics
Theoretical investigation of the relations between quantum decoherence and weak-to-strong measurement transition

Xiao-Feng Song,Shuang Liu,Xi-Hao Chen,Yusuf Turek

2024-04-30

Abstract:This paper delves into the crucial aspects of pointer-induced quantum decoherence and the transition between von Neumann's projective strong measurement and Aharonov's weak measurement. Both phenomena significantly impact the dynamical understanding of quantum measurement processes. Specifically, we focus on the interplay between quantum decoherence and the transition from weak to strong measurement by deducing and comparing the quantum decoherence and weak-to-strong measurement transition factors within a general model and using the well-known Stern-Gerlach experiment as an illustrative example. Our findings reveal that both phenomena can be effectively characterized by a universal transition factor intricately linked to the coupling between the system and the measurement apparatus. The analysis presented can clarify the mechanism behind the relations of quantum decoherence to the weak measurement and weak-to-strong measurement transition.

Quantum Physics
Beating Standard Quantum Limit with Weak Measurement

Geng Chen,Peng Yin,Wen-Hao Zhang,Gong-Chu Li,Chuan-Feng Li,Guang-Can Guo

DOI: https://doi.org/10.3390/e23030354

IF: 2.738

2021-01-01

Entropy

Abstract:Weak measurements have been under intensive investigation in both experiment and theory. Numerous experiments have indicated that the amplified meter shift is produced by the post-selection, yielding an improved precision compared to conventional methods. However, this amplification effect comes at the cost of a reduced rate of acquiring data, which leads to an increasing uncertainty to determine the level of meter shift. From this point of view, a number of theoretical works have suggested that weak measurements cannot improve the precision, or even damage the metrology information due to the post-selection. In this review, we give a comprehensive analysis of the weak measurements to justify their positive effect on prompting measurement precision. As a further step, we introduce two modified weak measurement protocols to boost the precision beyond the standard quantum limit. Compared to previous works beating the standard quantum limit, these protocols are free of using entangled or squeezed states. The achieved precision outperforms that of the conventional method by two orders of magnitude and attains a practical Heisenberg scaling up to n=106 photons.
Transfer of Fisher Information in Quantum Postselection Metrology

Zi-Rui Zhong,Xia-Lin Su,Xiang-Ming Hu,Ke-Xuan Chen,Hui-Lin Xu,Yan Zhang,Qing-Lin Wu

2024-12-06

Abstract:Postselected weak measurement has shown significant potential for detecting small physical effects due to its unique weak-value-amplification phenomenon. Previous works suggest that Heisenberg-limit precision can be attained using only the optical coherent states. However, the measurement object is the distribution of postselection, limiting the practical applicability. Here, we demonstrate that the output photons can also reach the quantum scale by utilizing the Fisher information transfer effect. In addition, we consider the insertion of a power-recycling cavity and demonstrate its positive impact on the distribution of postselection. Our results enhance the quantum metrological advantages of the postselection strategy and broaden its application scope.

Quantum Physics
Optimal Settings For Amplification And Estimation Of Small Effects In Postselected Ensembles

Aiham M. Rostom

DOI: https://doi.org/10.1002/andp.202100434

2023-03-17

Abstract:To describe the pre- and post-selected quantum ensembles, a complex quantity called the weak value of an operator is used. The weak value is highly controversial due to the fact that it is not bounded by the possible eigenvalues of the corresponding operator. Nevertheless, the obtaining of the anomalous weak value is regarded as a powerful technique in the quantum interferometry nowadays. Here it is shown that the postselection on a quantum system recovers a completely hidden interference effect in the measurement apparatus. Studying the interference pattern shows the optimal settings for the amplification and the parameter estimation. It also proves that the weak value is not an element of reality. Using single photons, it is investigated how a postselected photon can impart a $\pi$ phase shift (the peak of the amplification) to a photon interacting weakly with it in a nonlinear optical medium. The increasing of the degree of the entanglement lies behind the effectiveness of the postselection in the parameter estimation. In particular, arranging to postselect on pure entangled states can optimize the signal-to-noise ratio, allowing to achieve high-sensitive measurements using low input power.

Quantum Physics
Broadening the scope of weak quantum measurements I: A single particle accurately measured yet left superposed

Yakir Aharonov,Eliahu Cohen,Avshalom C. Elitzur

DOI: https://doi.org/10.1103/PhysRevA.89.052105

2013-01-11

Abstract:Weak measurement is unique in enabling measurements of non-commuting operators as well as otherwise-undetectable peculiar phenomena predicted by the Two-State-Vector-Formalism (TSVF). This article, the first in two parts, explores novel applications of weak measurement. We first revisit the basic principles of quantum measurement with the aid of the Michelson interferometer. Weak measurement is then introduced in a simple visualized manner by a specific choice of the reflecting mirror's position and momentum uncertainties. Having introduced the method, we proceed to its refinement for a single particle. We consider a photon going back and forth inside the interferometer, oscillating between a superposed and a localized state, while subjected to alternating strong and weak measurements. This cyclic process enables directly measuring both the photon's position ("which-path") and momentum (interference), without disturbing either. An alternative explanation of this result, not invoking weak values, is thoroughly considered and shown to be at odds with the experimental data. Finally a practical application of this experiment is demonstrated, where a single photon measures the various transmission coefficients of a multiport beam-splitter yet remains superposed. This method is then generalized to measurement of the wave-function itself, performed again on a single particle.

Quantum Physics
Weak-to-strong transition of quantum measurement in a trapped-ion system

Yiming Pan,Jie Zhang,Eliahu Cohen,Chun-wang Wu,Ping-Xing Chen,Nir Davidson

DOI: https://doi.org/10.1038/s41567-020-0973-y

IF: 19.684

2020-09-14

Nature Physics

Abstract:Quantum measurement remains a puzzle through its stormy history from the birth of quantum mechanics to state-of-the-art quantum technologies. Two complementary measurement schemes have been widely investigated in a variety of quantum systems: von Neumann's projective 'strong' measurement and Aharonov's weak measurement. Here, we report the observation of a weak-to-strong measurement transition in a single trapped 40Ca+ ion system. The transition is realized by tuning the interaction strength between the ion's internal electronic state and its vibrational motion, which play the roles of the measured system and the measuring pointer, respectively. By pre- and post-selecting the internal state, a pointer state composed of two of the ion's motional wavepackets is obtained, and its central-position shift, which corresponds to the measurement outcome, demonstrates the transition from the weak-value asymptotes to the expectation-value asymptotes. Quantitatively, the weak-to-strong measurement transition is characterized by a universal transition factor ${e}^{-{\varGamma }^{2}/2}$, where Γ is a dimensionless parameter related to the system–apparatus coupling. This transition, which continuously connects weak measurements and strong measurements, may open new experimental possibilities to test quantum foundations and prompt us to re-examine and improve the measurement schemes of related quantum technologies.

physics, multidisciplinary
Weak measurement induced super discord can resurrect lost quantumness

Uttam Singh,Arun Kumar Pati

DOI: https://doi.org/10.48550/arXiv.1305.4393

2013-05-19

Quantum Physics

Abstract:The projective measurement usually destroys the quantum correlation between two subsystems of a composite system, thereby making the measured state useless for any efficient quantum information processing and quantum computation task. The weak measurement acts gently on quantum system and do not force the system state to decohere completely, thus revealing the super quantum discord, which can take value more than that of the normal quantum discord. Remarkably, we prove that the super quantum discord in the post measured state is equal to the difference between the super quantum discord and the normal quantum discord in the original state. Thus, the weak measurement has the ability to resurrect the lost quantumness of any composite quantum state. This suggests a conservation law for the extra quantum correlation in any composite state. The amount of extra quantum correlation which is destroyed by the projective measurement in the original state is equal to the amount of extra quantum correlation captured by the weak measurement in the post-measured state.
Experimental Observation of an Anomalous Weak Value Without Post-Selection

Mu Yang,Qiang Li,Zheng-Hao Liu,Ze-Yan Hao,Chang-Liang Ren,Jin-Shi Xu,Chuan-Feng Li,Guang-Can Guo

DOI: https://doi.org/10.1364/prj.393480

IF: 7.6

2020-01-01

Photonics Research

Abstract:Weak measurement has been shown to play important roles in the investigation of both fundamental and practical problems. Anomalous weak values are generally believed to be observed only when post-selection is performed, i.e., only a particular subset of the data is considered. Here, we experimentally demonstrate that an anomalous weak value can be obtained without discarding any data by performing a sequential weak measurement on a single-qubit system. By controlling the blazing density of the hologram on a spatial light modulator, the measurement strength can be conveniently controlled. Such an anomalous phenomenon disappears when the measurement strength of the first observable becomes strong. Moreover, we find that the anomalous weak value cannot be observed without post-selection when the sequential measurement is performed on each of the components of a two-qubit system, which confirms that the observed anomalous weak value is based on sequential weak measurement of two noncommutative operators.
Quantum state engineering using weak measurement

Qiang Hu,Taximaiti Yusufu,Yusuf Turek

DOI: https://doi.org/10.1103/PhysRevA.105.022608

2021-10-31

Abstract:State preparation via postselected weak measurement in three wave mixing process is studied. Assuming the signal input mode prepared in a vacuum state, coherent state or squeezed vacuum state, separately, while the idler input prepared in weak coherent state and passing the medium characterized by the second-order nonlinear susceptibility. It is shown that when the single photon is detected at one of the output channels of idler beam's path, the signal output channel is prepared in single-photon Fock state, single-photon-added coherent state or single-photon-added squeezed vacuum state with very high fidelity, depending upon the input signal states and related controllable parameters. The properties including squeezing, signal amplification, second order correlation and Wigner functions of the weak measurement based output states are also investigated. Our scheme promising to provide alternate new effective method for producing useful nonclassical states in quantum information processing.

Quantum Physics
Demystifying weak measurements

R. E. Kastner

DOI: https://doi.org/10.1007/s10701-017-0085-4

2017-03-23

Abstract:A large literature has grown up around the proposed use of 'weak measurements' (i.e., unsharp measurements followed by post-selection) to allegedly provide information about hidden ontological features of quantum systems. This paper attempts to clarify the fact that 'weak measurements' involve strong (projective) measurements on one (pointer) member of an entangled system. The only thing 'weak' about such measurements is that the correlation established via the entanglement does not correspond to eigenstates of the 'weakly measured observable' for the remaining component system(s) subject to the weak measurement. All observed statistics are straightforwardly and easily predicted by standard quantum mechanics. Specifically, it is noted that measurement of the pointer steers the remaining degree(s) of freedom into new states with new statistical properties-constituting a non-trivial (even if generally small) disturbance. In addition, standard quantum mechanics readily allows us to conditionalize on a final state if we choose, so the 'post-selection' that features prominently in time-symmetric formulations is also equipment from standard quantum theory. Assertions in the literature that weak measurements leave a system negligibly disturbed, and/or that standard quantum theory is cumbersome for computing the predicted measurement results, are therefore unsupportable, and ontological claims based on such assertions need to be critically reassessed.

Quantum Physics

Quantum interference is most important for postselected weak measurement

Enhancement of the Quantum Coherence of the Rydberg Atoms System by Weak Measurement

Influence of Weak Measurement on Uncertainty Relations in a Quantum Dissipative System

Weak Measurement with Orthogonal Preselection and Postselection

Quantum Measurements with Preselection and Postselection

Weak values could reveal the hidden effects of quantum interactions

Quantum to Classical Transitions via Weak Measurements and Post-Selection

Advantage of quantum coherence in postselected metrology

Application of the Weak-Measurement Technique to Study Atom-Vacuum Interactions

Weak and Strong Measurement of a Qubit Using a Switching-Based Detector

State distinguishability under weak measurement and post-selection: A unified system and device perspective

Theoretical investigation of the relations between quantum decoherence and weak-to-strong measurement transition

Beating Standard Quantum Limit with Weak Measurement

Transfer of Fisher Information in Quantum Postselection Metrology

Optimal Settings For Amplification And Estimation Of Small Effects In Postselected Ensembles

Broadening the scope of weak quantum measurements I: A single particle accurately measured yet left superposed

Weak-to-strong transition of quantum measurement in a trapped-ion system

Weak measurement induced super discord can resurrect lost quantumness

Experimental Observation of an Anomalous Weak Value Without Post-Selection

Quantum state engineering using weak measurement

Demystifying weak measurements