Abstract:A polymer actuator typically responds to only one or two types of stimuli, where sensing and actuation are simultaneously exerted by the same responsive polymer. In cells, sensing and actuation are exerted separately by different biomolecules, which are integrated into nanoscale assemblies to construct the signaling network, making cells a multistimuli responsive and multimodal system. Inspired by the structure–function relationship of the signaling network in cells, we have developed a strategy to select and assemble proper functional polymers into assemblies, where sensing and actuation are exerted by different polymers, and the assemblies can present novel functions beyond that of each polymer component. Three polymers [polyaniline, PANi; poly(N-isopropylacrylamide), PNIPAm; and polydimethylsiloxane, PDMS] are integrated as nodes into a simple energy transduction network, which can be regulated by three molecular factors (pH, kosmotropic anions, and polyethylene glycol). PANi converts the light or electric stimulus into heat, which triggers the actuation of PNIPAm and PDMS. Relying on this energy transduction network, the polymer assembly can respond to six types of stimuli (light, electricity, temperature, water, ions, and organic solvents) and perform different actuation modes, serving as a powerful actuator. Programmable complex deformation upon multiple simultaneous or sequential stimuli has also been achieved by this actuator. An adaptive gripper to catch thin objects and a self-regulating switch to maintain environmental humidity illustrate the wide potential of this actuator for next-generation smart materials and soft robots.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.2c01549.Photoresponsive behavior of the actuator; mechanical characterization; water-, temperature-, Na2CO3 concentration-, and organic solvent-induced actuation and deformation; programmable deformation driven by sequential stimuli; self-regulated switch to maintain the environmental humidity in a homeostatic range; adaptive grippers; finite element method simulation; optimization of the composition of PANi–PNIPAm; XRD pattern of dried PANi–PNIPAm; photothermal response of PANi aqueous suspension; bending angles of the free neutralized actuator (shown in Figure 2c) upon irradiation; FEA simulation of a fully swelled neutralized actuator under light irradiation; photo and illustrations of fingers moving up and back controlled by a red laser pointer with neutralized actuators acting as knuckles; photothermal performance of the neutralized actuator and the acidified actuator; FEA simulation of the self-curling of an actuator around a hot metal rod; internal stress- and water-induced bending of an actuator exposed to varied humidity; bilayer actuator was saturated in hexane and the swollen PDMS layer caused the actuator to fold into a roll; DSC curves of PANi–PNIPAm swollen in solution with different Na2CO3 concentrations; actuators performing multishape transformation with different length to width ratios and different initial shapes; 2D patterns with saturated Na2CO3 solution inducing the 3D shape of the actuator; and FEA simulation of inverse coiling behavior of an actuator helix upon the change of temperature and CO32– concentration (PDF)Bending and curling of an actuator driven by light (MP4)Artificial sunflower turning toward the direction of the light source (MP4)Light-induced motion of a robot hand and actuators were used as knuckles (MP4)Self-curling of an actuator around a hot steel rod (70 °C) (MP4)Water driving a box with actuators as hinges to close (MP4)Programmable deformation of an actuator in response to sequential stimuli, including light, humidity, heat, and ionic strength (MP4)Self-regulated switch responding to humidity change (MP4)Adaptive grippers that can quickly grasp a hot metal rod or a hot metal wire ball with the PANi–PNIPAm layer in contact with the hot object (MP4)This article has not yet been cited by other publications.

Magnetically Responsive PDMS with aligned nickel coated carbon fibres

An ultra-large deformation bidirectional actuator based on a carbon nanotube/PDMS composite and a chitosan film.

A Magnet‐Driven Soft Bistable Actuator

Magneto‐responsive polydimethylsiloxane films with magnetic powder: Characterization and potential application in the tensile loading system

Flexible anisotropic magneto-sensitive elastomer films with out-of-plane particle chain for bionic actuator

Magnetic Field-Assisted Manufacturing of Groove-Structured Flexible Actuators with Enhanced Performance

Ultra‐large Stress and Strain Polymer Nanocomposite Actuators Incorporating a Mutually‐Interpenetrated, Collective‐Deformation Carbon Nanotube Network

Magnetoactive Elastomer/pvdf Composite Film Based Magnetically Controllable Actuator with Real-Time Deformation Feedback Property Part A Applied Science and Manufacturing

High-Performance, Low-Voltage, and Easy-Operable Bending Actuator Based on Aligned Carbon Nanotube/Polymer Composites

Magnetoactive elastomer/PVDF composite film based magnetically controllable actuator with real-time deformation feedback property

Introduction of a novel longitudinal-flexural-torsional actuator using a magnetostrictive rod

Magnetically responsive polymer nanopillars with nickel cap

Feasibility of Fiber Reinforcement Within Magnetically Actuated Soft Continuum Robots

Dual-mode Biomimetic Soft Actuator with Electrothermal and Magneto-Responsive Performance

Manufacturing a soft actuator/sensor integrated structure via multi-material direct writing processes technology

Programmable Multistimuli-Responsive and Multimodal Polymer Actuator Based on a Designed Energy Transduction Network

Large, Uni-Directional Actuation in Dielectric Elastomers Achieved by Fiber Stiffening

Wet-Spinning Carbon Nanotube/Shape Memory Polymer Composite Fibers with High Actuation Stress and Predesigned Shape Change

Optically Responsive Hydrogel with Rapid Deformation for Motion Regulation of Magnetic Actuators

Influence of superelastic training and huge strains on field-induced martensitic variants reorientation in particulate Ni–Mn–Ga/silicone composite

Responsive Soft Actuator: Harnessing Multi-Vapor, Light, and Magnetic Field Stimuli