Device Engineering of Perovskite Solar Cells to Achieve Near Ideal Efficiency

Sumanshu Agarwal,Pradeep R. Nair

DOI: https://doi.org/10.1063/1.4931130

2015-08-13

Abstract:Despite the exciting recent research on perovskite based solar cells, the design space for further optimization and the practical limits of efficiency are not well known in the community. In this manuscript, we address these aspects through theoretical calculations and detailed numerical simulations. Here, we first provide the detailed balance limit efficiency in the presence of radiative and Auger recombination. Then, using coupled optical and carrier transport simulations, we identify the physical mechanisms that contribute towards bias dependent carrier collection, and hence low fill factors of current perovskite based solar cells. Curiously, we find that while Auger recombination is not a dominant factor at the detailed balance limit, it plays a significant role in device level implementations. Surprisingly, our device designs indicate that it is indeed possible to achieve efficiency and fill factor greater than 25% and 85%, respectively - even in the presence of Auger recombination.

Mesoscale and Nanoscale Physics

What problem does this paper attempt to address?

The problems that this paper attempts to solve mainly include the following aspects:

1. **Determination of theoretical performance limits**:
- The authors aim to determine the detailed balance limit efficiency of perovskite solar cells in the presence of radiative recombination and Auger recombination through theoretical calculations and detailed numerical simulations. Specifically, they first provide the detailed balance limit efficiency including radiative recombination and Auger recombination.

2. **Analysis of the reasons for low fill factor (FF)**:
- The authors study the physical mechanisms that lead to the low fill factor of current perovskite solar cells. Through coupling optical and carrier transport simulations, they identify the factors that affect bias - dependent carrier collection, which explains why the fill factor of current perovskite solar cells is low.

3. **Optimized design to improve efficiency and fill factor**:
- The researchers propose some novel device design schemes, indicating that even in the presence of Auger recombination, an efficiency of over 25% and a fill factor of over 85% can be achieved, and with near - ideal superposition characteristics.

4. **Understanding material properties and recombination mechanisms**:
- The authors emphasize the importance of accurate experimental estimation of material properties (such as intrinsic carrier concentration, Auger recombination coefficient, etc.), because these parameters have a significant impact on the actual efficiency limit.

### Formula presentation

Some of the key formulas involved in the paper are as follows:

- **Recombination rate formula**:
\[
R=\frac{np - n_{i}^{2}}{\tau_{SRH}}+C_{rad}(np - n_{i}^{2})+C_{A}(np - n_{i}^{2})
\]
where:
- \(R\) represents the recombination rate,
- the first term represents trap - assisted SRH recombination,
- the second term represents radiative recombination,
- the third term represents Auger recombination.

- **Short - circuit current density (\(J_{SC}\)), open - circuit voltage (\(V_{OC}\)), fill factor (FF) and efficiency (\(\eta\))**:
- In the case of only considering radiative recombination, for a material with a bandgap of 1.55 eV, the theoretical SQ limit is:
\[
J_{SC} = 27.3 \, \text{mA/cm}^2, \quad V_{OC}=1.28 \, \text{V}, \quad FF = 90.3\%, \quad \eta=31.45\%
\]
- When considering Auger recombination, the performance parameters become:
\[
J_{SC} = 27.3 \, \text{mA/cm}^2, \quad V_{OC}=1.17 \, \text{V}, \quad FF = 92.3\%, \quad \eta = 29.48\%
\]

### Summary

The main objective of the paper is to clarify the theoretical performance limits of perovskite solar cells through theoretical analysis and numerical simulation, and to reveal the key physical mechanisms that limit the performance of current devices. In addition, the authors also propose methods to improve device design in order to achieve higher efficiency and fill factor.