Abstract:Low-temperature ( ≤100°C ) heat sources are abundantly and ubiquitously available in nature, such as solar energy, and in the form of untapped waste heat. This work aims to harness low-grade heat sources by introducing a portable harvesting system capable of effectively converting small spatial temperature gradients to mechanical and then electrical energy while maintaining a relatively high heat transfer capability. The designed and studied pair of harvesters are based on single-turn pulsating heat pipes with different condenser locations. Asymmetrical heating and cooling of the looped capillary glass tube gives rise to the bulk circulation of the internal fluid with occasional oscillation. The thermally-driven two-phase flow carries a spherical neodymium magnet fitted inside the tube. Two external solenoids generate a small amount of electricity every time the magnet passes through them. The proper functioning of energy-harvesting pulsating heat pipes (EH-PHPs) was investigated for pure water, acetone, and ethanol as the working fluids. Only water demonstrated satisfactory results and was thus selected as the main working fluid. Subsequently, high-frame-rate imaging of the internal flow along with time-domain temperature and open-circuit voltage data were employed and discussed to study the working principles of the harvester. In the next step, the mechanical, thermal, and electrical performance of the two EH-PHPs were quantitatively investigated for five different filling ratios (FRs) between 20% to 80% and five levels of heat input from 20.0W to 40.0W for each FR. Among the studied conditions, the EH-PHP with horizontal condenser (HC) configuration and 50% FR demonstrated the best performance in all three aspects. Accordingly, when 40.0W of heat was supplied to this ideal case, the magnet mean circulation frequency around the loop, effective thermal conductivity, and average induced open-circuit voltage (peak-to-peak) reached their maximum values of 0.46Hz , 11.5kW/(mK) , and 0.53V , respectively. Although the integration of electromagnetic generators had reduced the heat transfer performance, the thermal conductivity of the EH-PHPs was comparable to that of conventional heat pipes and at least 25 times better than copper. Finally, the EH-PHP with HC configuration and 50% FR, the superior case, produced up to 5μW of electrical power while its solenoids were connected to load resistances with an optimum impedance. Therefore, even in its early stage of development, the portable EH-PHP can be used to supply low-power electronics such as a quartz watch. The generated electricity corresponds to about 0.01% relative Carnot efficiency. The remarkable thermal conductivity and capability of electricity production with less than 5°C temperature difference across the tube distinguish the EH-PHPs from mature energy harvesting technologies with higher energy conversion efficiencies.

Thermoelectric generators as self-oscillating heat engines

A thermodynamic cycle for the solar cell

Thermodynamic Assessment of Solar Photon-Enhanced Thermionic Conversion

A fully passive thermal circuit for generating constant temperature difference from an oscillating heat source

Stochastic Thermodynamic Cycles of a Mesoscopic Thermoelectric Engine

Harvesting Solar Thermal Energy With a Micro-gap Thermionic-Thermoelectric Hybrid Energy Converter: Model Development, Energy Exchange Analysis, and Performance Optimization

Thermodynamic Analysis of Semiconductor Thermoelectric Generator

Solar Thermoelectricity for Power Generation

Heterojunction organic photovoltaic cells as molecular heat engines: A simple model for the performance analysis

The thermoelectric working fluid: thermodynamics and transport

Energy Conversion Using New Thermoelectric Generator

Thermogravitational Cycles: Theoretical Framework and Example of an Electric Thermogravitational Generator Based on Balloon Inflation/Deflation

Entropic and Near-Field Improvements of Thermoradiative Cells

Thermionic-enhanced near-field thermophotovoltaics

A Micrometer-sized Heat Engine Operating Between Bacterial Reservoirs

Efficient thermal energy harvesting using nanoscale magnetoelectric heterostructures

Mechanical Autonomous Stochastic Heat Engine.

An Efficient Electrothermal Model of a Thermoelectric Converter for a Thermal Energy Harvesting Process Simulation and Electronic Circuits Powering

Low-grade heat to electricity conversion using the self-circulation of a magnet inside a single-turn pulsating heat pipe

Mathematical analysis of the solar assisted thermoelectric generator

Solar Micro-Energy Harvesting Based on Thermoelectric and Latent Heat Effects. Part I: Theoretical Analysis