Abstract:Recently, the energy consumption of Ethernet has become one of the hottest topics focused by both academic committee and industry, especially with the increase of the link speed from 1Gbps to 10Gbps nowadays or even 40/100/200Gbps in the near future. To save the energy consumed by the Ethernet, the Energy Efficient Ethernet (EEE) is developed and standardized by the IEEE 802.3az work group. When there is no incoming traffic, the EEE can saves 90% of its energy consumption by entering into the Low Power Idle (LPI) mode. To maximize the energy saving of Ethernet, the Burst TRansmission (BTR) algorithm, which defines a new way to utilize the LPI mode, is developed as a policy for EEE. Prior work theoretically shows that the BTR algorithm makes a tradeoff between the energy saving and the queuing delay. However, the traffic pattern, on which the performance of EEE greatly depends, is assumed to be deterministic in their analyses. Besides, their models made estimation for many situations. In this paper, assuming that the arrival time of packets can be modeled by Poisson process, we build Markov model for EEE with the BTR algorithm and provide analytical understanding on the BTR algorithm. We propose two actual models: one focuses on the buffer size limit, the other concentrates on tolerable packet delay additionally. We draw some guidelines of parameter selection and policy design for EEE from combination of theory conclusions and simulation results. The results show that the saved energy can be constrained by link occupancy even though the buffer size is variational. The other policy buffer full triggered wake-up can achieve ideal ratio of energy consumption and arrival rate within the scope of the buffer as well. However, the tolerable delay can not be guaranteed by any policies. The buffer size is even fixed, which affects the flexibility of demanded delay for different business. The policy considering tolerable delay is supposed to be a little better than the other policy, with a little more complicated design. Thus we design an adaptive policy: detect the load utilization, apply the buffer full triggered wake-up policy for higher load utilization link, while applying the buffer full and timeout triggered wake-up policy for the delay sensitive business and tiny arrival rate.

An Energy Efficient Ethernet Strategy Based on Traffic Prediction and Shaping

Energy-Aware Forwarding Strategy for Metro Ethernet Networks

Delay Properties of Energy Efficient Ethernet Networks

Improving the Real-Time Performance of Ethernet for Plant Automation (EPA) Based Industrial Networks

Deterministic Transmission of Multimedia Data Based on EPA Network

EPA-based Open Network Control System

Research on energy-saving method based on reconfigurable network architecture

Modeling and understanding burst transmission for energy efficient ethernet.

Modeling and Understanding Burst Transmission Algorithms for Energy Efficient Ethernet.

Implementing energy saving algorithms for Ethernet link aggregates with ONOS

Power Efficiency and Delay Tradeoff of 10GBase-T Energy Efficient Ethernet Protocol

Power Saving Strategies and Technologies in Network Equipment Opportunities and Challenges, Risk and Rewards

Green Traffic Engineering for Future Core Networks

Optimizing energy efficiency in heterogeneous networks: An integrated stochastic geometry approach with novel sleep mode strategies and QoS framework

ETC: an Elastic Transmission Control Using End-to-End Available Bandwidth Perception.

Design of Energy-efficient EPON: a Novel Protocol Proposal and its Performance Analysis

Energy-saving adaptive computing and traffic engineering for real-time-service data centers

Energy management in communication networks: a journey through modelling and optimization glasses

QoS-aware Energy-Efficient Algorithms for Ethernet Link Aggregates in Software-Defined Networks

Re-architecting Congestion Management in Lossless Ethernet.

Robust Energy Management for Green and Survivable IP Networks