Abstract:Vehicle electronic systems currently utilize wired networks for power delivery (from the main battery) and communication (e.g., LIN, CAN, FlexRay) between nodes. Wired networks cannot practically accommodate nodes in moving parts (e.g., tires) and with the increasing functional complexity in vehicles, they require kilometer-long harnesses, significantly increasing fuel consumption and manufacturing and design costs. As an alternative, energy harvesting intra-vehicular wireless sensor networks (IVWSN) can accommodate nodes in all locations and they obviate the need for wiring, significantly lowering costs. In this paper, we empirically analyze the feasibility of such an IVWSN framework via extensive in-vehicle measurements for communications at 2.4 GHz, ultra wideband (UWB) and millimeter wave (mmWave) frequencies together with radio frequency (RF), thermal and vibration energy harvesting. Our analyses show that mmWave performs best for short line-of-sight (LoS) links in the engine compartment with performance close to UWB for LoS links in the chassis and passenger compartments in terms of worst case signal-to-interference-and-noise-ratio. For non-LoS links, which appear especially more in the engine compartment and chassis, UWB provides the highest security and reliability. 2.4 GHz suffers heavily from interference in all compartments while UWB utilizes narrowband suppression techniques at the cost of lower bandwidth; mmWave inherently experiences very low interference due to its propagation characteristics. On the other hand, RF energy harvesting provides up to 1 mW of power in all compartments. Vibration and thermal energy harvesters can supply all nodes consuming <10 mW in the engine compartment and all <5 mW nodes in the chassis. In the passenger compartment, thermal harvesting is not available due to low temperature gradients but vibration and RF sources can supply <1 mW nodes.

An empirical performance study of Intra-vehicular Wireless Sensor Networks under WiFi and Bluetooth interference

On the Potential of Bluetooth Low Energy Technology for Vehicular Applications

Security and Privacy Vulnerabilities of In-Car Wireless Networks: A Tire Pressure Monitoring System Case Study.

A Point-to-Point Interference Measurement Approach for Large-Scale Wireless Sensor Networks.

An Experimental Study on BLE 5 Mesh Applied to Public Transportation

A Blind Zone Alert System Based on Intra-Vehicular Wireless Sensor Networks

Empirical Feasibility Analysis for Energy Harvesting Intra-Vehicular Wireless Sensor Networks

Modeling and Performance Analysis of mmWave and WiFi-Based Vehicle Communications

Practical Evaluation of Wize and Bluetooth 5 Assisted RFID for an Opportunistic Vehicular Scenario

Integrating Connected Vehicles into IoT Ecosystems: A Comparative Study of Low-Power, Long-Range Communication Technologies

An Interference-Aware Transmission Power Control Scheme for Vehicular On-board Monitoring Wireless Sensor Network

Cross-platform Interference: Locating Wifi Devices with ZigBee Sensor Networks

Comparative Performance Evaluation of Intrusion Detection Methods for In-Vehicle Networks

Impact of Inter-Vehicular Interference on the Performance of Tire Pressure Monitoring Systems

Experience in measuring Wi-Fi to ZigBee interference using open-source hardware

Toward Reliable and Scalable Internet of Vehicles: Performance Analysis and Resource Management

Multiple-Frequency-Bands Channel Characterization for In-vehicle Wireless Networks

On Potential Challenges of V2X Sidelink Relaying under Interference: Link-Level and System-Level Simulation with Neural Network Assisted.

A Study on Performance of Inter-Vehicle Communications in Bidirectional Traffic Streams

Enabling Zigbee Link Performance Robust Under Cross-Technology Interference

Low Cost and Modular Approach to Real-Time Vehicle to Vehicle Communication using Wi-Fi