Abstract:The film capacitor, one typical type of electrostatic capacitors, exhibits its unique advantages in the high-power energy storage devices operating at a high electric field due to the high electrical breakdown strength (Eb) of the polymeric films. However, the development of film capacitor towards high energy storage density is severely hindered by the low dielectric constant (ε) and low charge-discharge efficiency (η) of the polymeric films. The film of polypropylene (PP), the most used polymeric film with a market share of 50%, owns a high η due to its low inherent hysteresis loss. Yet the low ε (2.2 at 103 Hz) impedes the increase of its energy storage density (1-2 J/cm3). Here we demonstrate that the discharged energy density (Ue) of PP film could be largely increased from 1.40 J/cm3 of pure PP film to 3.86 J/cm3 of PP nanocomposite film by incorporating a small loading of core-shell structured 3 () nanoparticles (2.27 vol%) into PP matrix. The obtained Ue of 3.86 J/cm3, to the best of our knowledge, is the highest reported value for the PP based films using commercial PP resin. Meanwhile, the η merely undergoes a slight decrease from 99.5% to 94.1%. Similarly, the obtained η of 94.1%, to the best of our knowledge, is also the highest value for the polymeric films reported in the previous works. The significant increase of Ue (175.7%) and negligible decrease of η (5.4%) are mainly attributed to the increase of ε from 2.2 to 3.7 and Eb from 361 MV/m to 448 MV/m. Compared with the films of raw BT/PP nanocomposites, the Ue exhibits a significant increase of 365.1% from 0.83 J/cm3 to 3.86 J/cm3 and the η also displays an increase of 7.4% from 87.6% to 94.1%. The significant improvement of energy storage performance achieved in the film of /PP nanocomposite suggests that the organic PMMA shell plays an important role in the amelioration of compatibility of BT nanoparticles and PP matrix and the alleviation of local electric field concentration. Moreover, the PMMA shell could also provide a robust scaffold to hinder the early breakdown failure of nanocomposites due to its high Eb (425 MV/m). Thus, high ε, low loss and high Eb were simultaneously achieved. Specifically, the high hot stretch ratio (1:4) of nanocomposite film indicates the strong feasibility of industrialized film processing. Apart from the experimental analysis, theoretical analysis using the simulation of finite element is also carried out to figure out the influence of organic PMMA shell on the dielectric performance of PP nanocomposites films. These findings enable the development of film capacitor using non-polar PP based film towards high energy storage density.

Improved Energy Storage Property of Polypropylene-based Composite Dielectrics by Introducing Surface-Charged BaTiO3@chitisan Ultrafine Constructions

Enhancing energy storage property of polypropylene‐based sandwich composites with surface‐modified nonzero dimensional nanomaterials

Significantly Improved Energy Storage Density of Polypropylene Nanocomposites Via Macroscopic and Mesoscopic Structure Designs

Core‐shell structured BaTiO 3 @ SiO 2 @ PDA for high dielectric property nanocomposites with ultrahigh energy density

Interesting Influence of Different Inorganic Particles on the Energy Storage Performance of a Polyethersulfone-Based Dielectric Composite

Improved dielectric, tensile and energy storage properties of surface rubberized BaTiO3/polypropylene nanocomposites

Ultrafine Core-Shell BaTiO3@SiO2 Structures for Nanocomposite Capacitors with High Energy Density

Nonpolar Sub-10 Nm Tio2 Nanocrystal for High Energy Density Polypropylene Nanocomposites

Nonpolar sub-10 nm TiO 2 nanocrystal for high energy density polypropylene nanocomposites

Sandwich-Structured Polymer Composites with Core–Shell Structure BaTiO 3 @SiO 2 @PDA Significantly Enhanced Breakdown Strength and Energy Density for a High-Power Capacitor

Improved Energy Density Obtained in Trilayered Poly(vinylidene fluoride)-Based Composites by Introducing Two-Dimensional BN and TiO2 Nanosheets

Ultrafast Discharge and High-Energy-Density of Polymer Nanocomposites Achieved Via Optimizing the Structure Design of Barium Titanates

Enhanced energy storage performance of polyethersulfone-based dielectric composite via regulating heat treatment and filling phase

Structure, Dielectric, Ferroelectric, and Energy Density Properties of Polyethersulfone-Based Composite for Energy Storage Application

Enhanced dielectric, energy storage and tensile properties of BaTiO3–NH2/low-density polyethylene nanocomposites with POE-GMA as interfacial modifier

Ultrahigh Energy Storage Density in Poly(vinylidene fluoride)‐Based Composite Dielectrics via Constructing the Electric Potential Well

Improved dielectric and energy storage properties of polypropylene by adding hybrid fillers and high-speed extrusion

Sandwich-Structured PVDF-Based Composite Incorporated with Hybrid Fe3O4@BN Nanosheets for Excellent Dielectric Properties and Energy Storage Performance

High energy density and discharge efficiency polypropylene nanocomposites for potential high-power capacitor

Achieving Excellent Dielectric and Energy Storage Performance in Core-Double-Shell-Structured Polyetherimide Nanocomposites

Significantly enhanced electrostatic energy storage performances of polyetherimide nanocomposites with ultralow loadings of barium titanate nanoparticles