Abstract:Hole transporting materials (HTMs) play a crucial role in achieving highly efficient and stable perovskite solar cells (PSCs). Spiro-typed materials being the most widely used HTMs are commonly utilized with dopants, such as Li-TFSI, to improve their carrier mobility significantly. However, dopants could affect the morphology of hole transporting layer negatively by forming defects and pinholes which restrict the performance of devices. Here, we adopt the extended π-conjugated structures N-ethylcarbazole and dibenzothiophene to substitute the donor group 4-methoxyphenyl of spiro-OMeTAD, devising two novel HTMs, SC and ST, respectively. Notably, SC possesses low crystallinity and good solubility due to the existence of ethyl in side groups, leading to decent miscibility with Li-TFSI to prevent unfavorable phase-separation. The SC-based device delivers the best power conversion efficiency (PCE) of 21.76% which is higher than that of spiro-OMeTAD (20.73%), attributed to the formation of smooth and pinhole-free morphology. Moreover, it exhibits long-term stability and retains over 90% of initial PCE value for more than 30 days without encapsulation in ambient air. In contrast, the ST-based device suffers from dense pinholes induced by its relatively high crystallinity and poor solubility, resulting in a low PCE of 18.18% and inferior stability. Thus, it is effective to modify the side groups in spiro-typed HTMs with specific structures to obtain predictable properties, fabricating PSCs with high efficiency and stability facilely.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.chemmater.0c03772?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.chemmater.0c03772</a>.Synthetic routes of SC and ST; the method of hole mobility measurements; the details of stability test of devices; 1H and 13C NMR and MALDI-TOF spectra of the developed compounds; UPS spectra of perovskite and HTMs; TGA and DSC tests of HTMs; DFT result of spiro-OMeTAD; top view SEM images, AFM images, and cross-sectional SEM images of devices; TOF-SIMS mappings of the distribution of dopants in HTMs; UV–vis spectra of radical cation; the devices performance under various concentrations of HTMs and dopants; contact angle of HTMs in the solid state and the stability tests of devices; decomposition rate of perovskite coated by HTMs; and cost calculations (<a class="ext-link" href="/doi/suppl/10.1021/acs.chemmater.0c03772/suppl_file/cm0c03772_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Chromium trioxide modified spiro-OMeTAD for highly efficient and stable planar perovskite solar cells

Metal Organic Framework Doped Spiro-OMeTAD with Increased Conductivity for Improving Perovskite Solar Cell Performance

FeCl3 as a low-cost and efficient p-type dopant of Spiro-OMeTAD for high performance perovskite solar cells

Kalium persulfate as a low-cost and effective dopant for spiro-OMeTAD in high performance and stable planar perovskite solar cells

Molecular engineering of highly efficient dopant-free spiro-type hole transporting materials for perovskite solar cells

Ion-Migration Inhibitor for Spiro-OMeTAD/Perovskite Contact Toward Stable Perovskite Solar Cells

Ion-modulated radical doping of spiro-OMeTAD for more efficient and stable perovskite solar cells

Highly efficient and stable planar perovskite solar cells enabled by K3[Fe(CN)6]-doped spiro-OMeTAD

Additive engineering on spiro-OMeTAD hole transport material for CsPbI3 all-inorganic perovskite solar cells with improved performance and stability

Dopant-free Spiro-OMeTAD As Hole Transporting Layer for Stable and Efficient Perovskite Solar Cells

New insight into the grafted transition metal ions in trilacunary Keggin polyoxometalates dopants for efficient and stable perovskite solar cells

Perovskite solar cells based on spiro-OMeTAD stabilized with an alkylthiol additive

Design of Low Crystallinity Spiro-Typed Hole Transporting Material for Planar Perovskite Solar Cells to Achieve 21.76% Efficiency

Quasi-Planar Core based Spiro-Type Hole-Transporting Material for Dopant-Free Perovskite Solar Cells

Tert-butyl peroxybenzoate-doped spiro-OMeTAD for perovskite solar cells with efficiency over 23%

A Trifluoroethoxyl Functionalized Spiro‐Based Hole‐Transporting Material for Highly Efficient and Stable Perovskite Solar Cells

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Unveiling the Critical Role of Oxidants and Additives in Doped Spiro-OMeTAD toward Stable and Efficient Perovskite Solar Cells

Cyclization of methoxy groups on spiro-type hole transporting materials for efficient and stable perovskite solar cells

Perovskite Solar Cells Employing a PbSO4(PbO)4 Quantum Dot-Doped Spiro-OMeTAD Hole Transport Layer with an Efficiency over 22

Molecular Doping of a Hole-Transporting Material for Efficient and Stable Perovskite Solar Cells