Comparison of physicochemical and rheology properties of Shiitake stipes-derived chitin nanocrystals and nanofibers

Ming Zhang,Yanhong Li,Wenhang Wang,Yiran Yang,Xiaoting Shi,Mengjiao Sun,Yanjie Hao,Yu Li
DOI: https://doi.org/10.1016/j.carbpol.2020.116468
IF: 10.723
2020-09-01
Carbohydrate Polymers
Abstract:<p>Chitin production from fungal sources has gained increased attention in recent years in terms of continuous supply and safety. In this study, we produced chitin from Shiitake stipes through deproteinization, depigmentation, demineralization and removal of glucans, and then prepared chitin nanocrystal (ChNC) and chitin nanofibers (ChNF) by acid hydrolysis or high-pressure homogenizers. Such obtained ChNFs have higher length than the ChNCs with a length of 142.4 ± 40.4 nm, with the similar diameter (9 nm). In addition, the purity of ChNC and ChNF were over 98 % measured by HPAEC. The zeta potential analysis showed that ChNC is stable in acid form, while ChNF is in the opposite. Finally, we evaluated the rheology properties of samples to find the impact of salt concentrations on nanoparticles interactions. Overall, the fungi-derived chitin nanomaterials with diversity of characters exhibit immense potential for applications in nutraceutical and food industry.</p>
polymer science,chemistry, organic, applied
What problem does this paper attempt to address?
The main problem that this paper attempts to solve is to evaluate the potential of shiitake mushroom stems as a source of commercial chitin nanomaterials, and further characterize the physicochemical and rheological properties of chitin nanocrystals (ChNC) and chitin nanofibers (ChNF) extracted from shiitake mushroom stems. Specifically, the research aims to: 1. **Explore whether shiitake mushroom stems can be a source of commercial chitin nanomaterials**: By comparing chitin nanomaterials prepared by two different methods (acid hydrolysis and high - pressure homogenization), evaluate their structures and properties. 2. **Characterize the physicochemical properties of chitin nanomaterials**: Including purity, morphology, crystallinity, thermal stability, etc. 3. **Analyze the effect of salt concentration on the dispersion stability of chitin nanomaterials**: Through rheological tests, study the interactions and stabilities of nanomaterials at different salt concentrations. ### Background of the paper Chitin is a polysaccharide widely existing in nature, mainly composed of N - acetyl - D - glucosamine connected by β-(1,4) glycosidic bonds. Due to its biocompatibility, renewability, non - cytotoxicity and degradability, chitin has potential application values in multiple fields. However, the insolubility and difficult processability of chitin limit its wide application. In recent years, researchers have begun to focus on extracting chitin nanomaterials from unconventional sources such as fungi to overcome the limitations of traditional sources (such as crustaceans). ### Research methods 1. **Material preparation**: Extract chitin from shiitake mushroom stems, and remove proteins, pigments and minerals through steps such as alkali treatment, bleaching and acid treatment. 2. **Nanomaterial preparation**: Use acid hydrolysis and high - pressure homogenization methods to prepare chitin nanocrystals (ChNC) and chitin nanofibers (ChNF) respectively. 3. **Characterization methods**: - **Transmission electron microscope (TEM)**: Observe the morphology and size of nanomaterials. - **Nuclear magnetic resonance (NMR)**: Determine the degree of acetylation (DA) of chitin. - **X - ray diffraction (XRD)**: Analyze the crystallinity of nanomaterials. - **Thermogravimetric analysis (TGA)**: Study the thermal stability of nanomaterials. - **Fourier transform infrared spectroscopy (FTIR)**: Analyze the chemical structure of nanomaterials. - **Carbohydrate analysis**: Determine the purity by high - performance anion - exchange chromatography (HPAEC). - **Rheological property analysis**: Study the rheological behavior of nanomaterials at different salt concentrations. - **ζ - potential measurement**: Evaluate the dispersion stability of nanomaterials at different pH values. - **Conductometric titration experiment**: Determine the contents of surface carboxyl and amino groups. ### Main results 1. **Purity and morphology**: The purities of the prepared ChNC and ChNF are both over 98%. The average length of ChNC is 142.4 ± 40.4 nm, and the diameter is 9.3 ± 2.0 nm; the length of ChNF is from several hundred nanometers to several micrometers, and the width is 6 - 11 nm. 2. **Crystallinity**: The crystallinity index (CrI) of ChNC is 75.3%, which is higher than 70.6% of ChNF. 3. **Thermal stability**: The thermal stability of ChNF is higher than that of ChNC, and the final residual masses are 12% and 13% respectively. 4. **ζ - potential**: ChNC is stable under acidic conditions, while ChNF is stable under alkaline conditions. 5. **Rheological properties**: The salt concentration has a significant impact on the rheological behavior of nanomaterials. As the salt concentration increases, the viscoelasticity of nanomaterials shows three different change regions. ### Conclusion This research successfully extracts chitin nanomaterials from shiitake mushroom stems and systematically characterizes their physicochemical and rheological properties. The results show that shiitake mushroom stems are a feasible source for preparing high - purity chitin nanomaterials, and these nanomaterials have broad application prospects in fields such as food and nutraceuticals.