Abstract:Using a Couette-Taylor (CT) crystallizer, a non-isothermal technique was developed for effective control of the crystal size distribution (CSD) of the suspension. The proposed technique is based on the internal heating cooling cycle in a non-isothermal CT crystallizer, consisting of a hot cylinder (T-h) and cold cylinder (T-c). Thus, an internal loop of fines destruction of the suspension in the heating boundary layer of the hot cylinder and recrystallization in the cooling boundary layer of the cold cylinder is formed by the periodic circulating flow of the Taylor vortex in the non-isothermal CT crystallizer. The efficiency of the heating cooling cycle for improving the CSD depends on the non-isothermal mode and non-isothermal parameters. When the inner cylinder temperature is hot and the outer cylinder temperature is cold (Mode-I), this is more efficient for improving the mean crystal size and dispersity of the CSD than when the cylinder temperatures are reversed (Mode-II). In addition, the efficiency of the heating-cooling cycle is optimized using the temperature difference between hot and cold cylinders (Delta T = T-h - T-c) and saturated bulk temperature. The Taylor vortex fluid motion is always found to enhance the internal cycle efficiency. Thus, the initially small crystal size and broad CSD of the seed suspension (230 mu m of mean crystal size and 81% of coefficient of variation) are improved to a large crystal size and narrow CSD of the product suspension (1020 mu m of mean crystal size and 31% of coefficient of variation) at a non-isothermality of 8.7 +/- 0.1 degrees C, saturated bulk temperature of 24.0 degrees C, and rotation speed of 800 rpm. The variation of the cycle efficiency is explained in terms of the driving forces for heating dissolution and cooling recrystallization.

Manufacturing of high quality hydrotalcite by computational fluid dynamics simulation of an impinging jet crystallizer

Preparation of hydrotalcite crystals using impinging jet mixers

Numerical investigation of hydrodynamics and crystal growth in a forced circulation crystallizer

Hierarchical zeolite structures with designed shape by gel-casting of colloidal nanocrystal suspensions

Population Balance and CFD Simulation of Particle Aggregation and Growth in a Continuous Confined Jet Mixer for Hydrothermal Synthesis of Nanocrystals

Shaping Droplet by Semiflexible Micro Crystallizer for High Quality Crystal Harvest.

Numerical simulation of struvite crystallization in fluidized bed reactor

Control of Crystal Size Distribution using Non-Isothermal Taylor Vortex Flow

Preparation of inorganic salt particles by reactive crystallization in an annular swirling flow reactor

Synthesis of Magnesium Hydroxide Using Post‐Reaction Filtrate as Ammonia Carrier and Morphology Analysis

Experimental and CFD Analysis of Hydrodynamics in Dual-Impeller Crystallizer at Different Off-Bottom Clearances

Crystallization Process and Nucleation Kinetics of Mg2+//SO42-, NO3--H2O System

Experimental and Numerical Modeling for Flattening and Rapid Solidification with Crystallization Behavior of Supersonic Ceramic Droplets

Computational fluid dynamics simulation of a jet crystallizer for continuous crystallization of lovastatin

Droplet Microfluidics XRD Identifies Effective Nucleating Agents for Calcium Carbonate

High Selective Synthesis of CaCO3 Superstructures Via Ultra-Homoporous Interfacial Crystallizer

Membrane assisted reactive crystallization with multiple interfacial flow

Effects of Several Crystallization Conditions on the Recovery of Desulfurization By-products

Hydrothermal crystallization of zeolite Y from Na2O-Fe2O3-Al2O3-SiO2-H2O system

Batch Cooling Crystallization in Non-Isothermal Taylor Vortex Flow: Effective Method for Controlling Crystal Size Distribution

Influence of Seed Crystal and Modifier on the Morphology of α-calcium Sulfate Hemihydrate Prepared by Salt Solution Method in Pilot Scale