Abstract:A triboelectric nanogenerator (TENG) can effectively capture human mechanical energy and power wearable electronic devices, reducing the need for frequent charging or battery replacement. However, traditional sensor preparation processes are gradually unable to meet people's needs for the portability, breathability, and biocompatibility of sensors. We prepared a high breathability flexible triboelectric nanogenerator (RB-TENG) using electrospinning technology. Polyvinylidene fluoride (PVDF) was selected as the material for preparing the electron gain side friction layer of RB-TENG, while a conductive solution was prepared using thermoplastic polyurethane (TPU) and carbon black (CB) as its electron losing side friction layer and electrode layer. To enhance the output performance of the RB-TENG, we increased the surface charge density of its friction layer by doping carbon black (CB) into the polyvinylidene fluoride (PVDF) solution. We then evaluated how varying CB concentrations influenced the device's output. Our findings revealed that when the CB concentration reached 1.2 wt %, the RB-TENG achieved its optimal performance, with peak open-circuit voltage and transfer charge values of 149.2 V and 176.5 nC, respectively. Additionally, the RB-TENG demonstrated the ability to detect different physical states of the human body while efficiently harvesting the generated energy. By integrating a capacitor conversion circuit, the mechanical energy produced during daily human activities can be efficiently captured and converted into electrical energy. This significantly enhances the efficiency of RB-TENG in charging capacitors, enabling the rapid powering of microelectronic devices. The RB-TENG-based energy harvesting and intelligent sensing system we designed holds significant theoretical and practical value for wearable electronics. The technology presented in this paper offers promising applications for a wide range of wearable devices.

Bioinspired Triboelectric Soft Robot Driven by Mechanical Energy

Sliding-mode Triboelectric Nanogenerator Based on Paper and As a Self-Powered Velocity and Force Sensor

Piezoelectric soft robot driven by mechanical energy

TENG-Bot: Triboelectric nanogenerator powered soft robot made of uni-directional dielectric elastomer

A multifunctional robotic system toward moveable sensing and energy harvesting

Soft triboelectric nanogenerators for mechanical energy scavenging and self-powered sensors

Bioinspired Triboelectric Nanogenerators as Self‐Powered Electronic Skin for Robotic Tactile Sensing

Slug-inspired Magnetic Soft Millirobot Fully Integrated with Triboelectric Nanogenerator for On‐board Sensing and Self‐powered Charging

Bioinspired designs and biomimetic applications of triboelectric nanogenerators

Triboelectric and Piezoelectric Nanogenerators for Future Soft Robots and Machines

A Sustainable and Flexible Microbrush‐Faced Triboelectric Generator for Portable/Wearable Applications

A Self-Powered Six-Axis Tactile Sensor by Using Triboelectric Mechanism

Silicon rubber/expandable microsphere based triboelectric nanogenerator for harvesting biomechanical energy

Integrated Multilayered Triboelectric Nanogenerator for Harvesting Biomechanical Energy from Human Motions.

Bioinspired Stretchable Triboelectric Nanogenerator As Energy-Harvesting Skin for Self-Powered Electronics

The Triboelectric Nanogenerator with Dual Functions of Sensing and Power Generation Based on Electrospinning

Large-Scale and Flexible Self-Powered Triboelectric Tactile Sensing Array for Sensitive Robot Skin

Leveraging triboelectric nanogenerators for bioengineering

An Untethered Soft Crawling Robot Driven by Wireless Power Transfer Technology

High‐Performance and Durable Rotational Triboelectric Nanogenerator Leveraging Soft‐Contact Coplanar Charge Pumping Strategy

Bioinspired Design of Light‐Powered Crawling, Squeezing, and Jumping Untethered Soft Robot