Abstract:Thin-walled structures are widely used as crucial structural components for energy absorbing applications. To design lightweight thin-walled-involved composite structures with better mechanical performance remains an open issue. In this study, the X-shaped rib-reinforced foam-filled tubes were designed and tested under quasi-static axial compression. Two types of foams, i.e., the aluminum foam and the additively manufactured polylactide (PLA) foam were considered as lightweight fillers. The effects of foam block filling ratio (rib angle) and arrangement of different foam fillers on the axial crushing performance of the diagonally rib-reinforced foam block-filled tube were analyzed. Results indicated that tubes that were diagonally filled with PLA foam blocks possessed better energy absorption capacity, whereas the higher mean crushing strength was achieved by diagonally filling with two aluminum blocks. It also revealed that tubes filled with different foam blocks did not always show advantages over those filled with the same foams. Moreover, the diagonally aluminum foam blocks filled tubes with a large rib angle could induce the global buckling, whereas that with the rib angle of 120 degrees exhibited better mechanical properties in load consistency and specific energy absorption capacity. Numerical simulations were conducted to reveal the energy absorption enhancement mechanism of the tubes filled with varying combinations of the reinforced fillers. Results indicated that the interaction between the foam blocks and the reinforced rib contributed most to the increased energy absorption. Further, an analytical model for evaluating the crushing strength of the developed structure was proposed. The theoretical predictions are in good agreement with the experimental results. The idea of tailoring the fillers arrangement and assembling pattern would promote the development of optimal energy-absorbing thin-walled involved composite structures.

Partition energy absorption of axially crushed aluminum foam-filled hat sections

A Theoretical Analysis for the Dynamic Axial Crushing Behaviour of Aluminium Foam-Filled Hat Sections

Experimental Studies on the Axial Crash Behavior of Aluminum Foam-Filled Hat Sections

Crushing and energy absorption of density-graded foam-filled square columns: Experimental and theoretical investigations

Dynamic Crushing of All-Metallic Corrugated Panels Filled With Close-Celled Aluminum Foams

Crashworthiness of foam filled truncated conical sandwich shells with corrugated cores

Energy-absorbing mechanism and crashworthiness performance of thin-walled tubes diagonally filled with rib-reinforced foam blocks under axial crushing

Axial Impact Performances of Composite Aluminum Foam Tubes

Experimental, numerical and analytical studies on the aluminum foam filled energy absorption connectors under impact loading

Dynamic Crushing Force of Rotational Ellipsoidal Composite Shells-Filled Foam

On low-velocity impact response of foam-core sandwich panels

Dynamic Crushing Behaviors of Aluminum Foam Filled Energy Absorption Connectors

Crashworthiness study of aluminum foam-filled tubular lattice structures based on triply periodic minimal surface metamaterials under lateral crushing

Experimental and Numerical Investigation on the Crushing Behavior of Sandwich Composite under Edgewise Compression Loading

Effects of Aluminum Foam Filling on the Low-Velocity Impact Response of Sandwich Panels with Corrugated Cores

Dynamic Crushing Behavior of Random and Functionally Graded Metal Hollow Sphere Foams

On axial crushing behavior of double hat-shaped CFRP and GFRP structures

Compression performances of integral-forming aluminum foam sandwich

Axial crushing of self-lock multi-cell tubes with foam filler and tube envelope

Compressive Strength and Energy Absorption of Sandwich Panels with Aluminum Foam-Filled Corrugated Cores

Mechanical Properties and Constitutive Model Applied to the High-Speed Impact of Aluminum Foam That Considers Its Meso-Structural Parameters.