Abstract:Valorization of iron-rich metallurgical slags in the construction of Fenton-like catalysts has an appealing potential from the perspective of sustainable development. For the first time, copper smelting slag (CSS) was utilized as the precursor to synthesize hollow sea urchin-like Fe–Cu nanoreactors (Cu 1.5 Fe 1 Si) to activate peroxymonosulfate (PMS) for chlortetracycline hydrochloride (CTC) degradation. The hyper-channels and nano-sized cavities were formed in the catalysts owing to the induction and modification of Cu, not only promoting the in-situ growth of silicates and the formation of cavities due to the etching of SiO 2 microspheres, but also resulting the generation of nanotubes through the distortion and rotation of the nanosheets. It was found that 100 % CTC degradation rate can be achieved within 10 min for Cu 1.5 Fe 1 Si, 75 times higher than that of Cu 0 Fe 1 Si (0.0024 up to 0.18 M −1 ‧min −1 ). The unique nanoconfined microenvironment structure could enrich reactants in the catalyst cavities, prolong the residence time of molecules, and increase the utilization efficiency of active species. Density functional theory (DFT) calculations show that Cu 1.5 Fe 1 Si has strong adsorption energy and excellent electron transport capacity for PMS, and Fe-Fe sites are mainly responsible for the activation of PMS, while Cu assists in accelerating the Fe(II)/Fe(III) cycle and promotes the catalytic efficiency. The excellent mineralization rate (83.32 % within 10 min) and efficient treatment of CTC in consecutive trials corroborated the high activity and stability of the Cu 1.5 Fe 1 Si. This work provides a new idea for the rational design of solid waste-based eco-friendly functional materials, aiming at consolidating their practical application in advanced wastewater treatment.

Resource utilization of copper slag for microelectrolysis material preparation for phenol degradation

Electrochemical Oxidation of Chemi-Thermo-mechanical Pulping Wastewater

Preparation of micro-electrolysis material from flotation waste of copper slag and its application for degradation of organic contaminants in water

Volatilization of Zn and Pb and Preparation of Integrated Micro-Electrolysis Filter from Copper Slag and Its Application for Removing Cr(VI) from Aqueous Solution.

Electrochemically Catalytic Degradation of Phenol with Hydrogen Peroxide in Situ Generated and Activated by a Municipal Sludge-Derived Catalyst

A novel scheme for the utilization of Cu slag flotation tailings in preparing internal electrolysis materials to degrade printing and dyeing wastewater

Copper slag based catalytic material was prepared using a one-pot method to efficiently activate of peroxymonosulfate for degradation of carbamazepine

Preparation of Nickel Slag–Based Microelectrolysis Filler Material and Eco-friendly Utilization in the Degradation of Azo Compound Wastewater

Red mud-derived iron carbon catalyst for the removal of organic pollutants in wastewater

Integrated system of electro-catalytic oxidation and microbial fuel cells for the treatment of recalcitrant wastewater

A novel Cu/Fe cathode prepared by a facile redox pathway for phenol degradation electrocatalytically via the electro-fenton assisted electro-chlorination process

Enhanced Degradation of Phenolic Compounds in Coal Gasification Wastewater by Methods of Microelectrolysis Fe-C and Anaerobic-Anoxic—Oxic Moving Bed Biofilm Reactor (A2O-MBBR)

Simultaneous Phenol Removal and Resource Recovery from Phenolic Wastewater by Electrocatalytic Hydrogenation

Boosting peroxymonosulfate activation via Fe–Cu bimetallic hollow nanoreactor derived from copper smelting slag for efficient degradation of organics: The dual role of Cu

Preparation of Fe-Cu bimetal from copper slag by carbothermic reduction–magnetic process for activating persulfate to degrade bisphenol A

Efficient degradation of chlorinated phenolic compounds by Fe@Cu materials with enhanced oxygen reduction reaction

Electrospun membranes of iron tailings toward peroxymonosulfate activation for efficient photocatalytic degradation of organic pollutants

Enhanced Biogas Production and Biodegradation of Phenanthrene in Wastewater Sludge Treated Anaerobic Digestion Reactors Fitted with a Bioelectrode System

Efficient peroxymonosulfate activation of immobilized Fe–N–C catalyst on ceramsite for the continuous flow removal of phenol

Preparation of Microelectrolysis Filler Using Coal Slag for the Removal of Hazardous Substances in Contaminated Water

One-pot solvothermal synthesis of Cu-Fe-MOF for efficiently activating peroxymonosulfate to degrade organic pollutants in water:Effect of electron shuttle