Effect of hygrothermal aging on mechanical properties of continuous flax fiber composites
Wenlong Mu,Shijie Li,Shikun Zhang,Xianglin Chen,Yufeng Sun,Kaiyuan Zhou,Guofeng Qin
DOI: https://doi.org/10.1002/pc.28630
IF: 5.2
2024-06-03
Polymer Composites
Abstract:Experimental process and results. The influence of hygrothermal aging on the mechanical properties of flax fiber‐reinforced polymer (FFRP) composites was studied by examining the mechanical properties and failure mechanism of the composite laminates exposed in distilled water at different temperatures. The resin transfer molding (RTM) process was used to manufacture FFRP laminates, which were then subjected to accelerated aging tests in distilled water at different temperatures. The moisture absorption characteristics of FFRP were analyzed by a water absorption test. Tensile, bending, and low‐velocity impact tests of laminates after different aging conditions were performed. Combined with DSC and FTIR tests, the failure mechanism of FFRP exposure to hygrothermal aging was analyzed. The result indicated that the increase in temperature will accelerate the moisture absorption process of FFRP, and the hygroscopic behaviors at different temperatures conform to Fick's law. In the early stage of hygrothermal aging, the composites undergo post‐curing, and the tensile and bending strengths increase. After that, the tensile and bending strengths are decreased because of the thermo‐oxygen aging of materials and fiber/matrix interface damage. After hygrothermal aging, the impact peak force of FFRP decreases obviously while the absorbed energy increases due to the increase of internal defects and plasticization of composites. The increase of hygrothermal aging temperature aggravates the aging of materials, resulting in a more obvious decline in the tensile, bending, and impact properties of the composites. Highlights The effect of hygrothermal aging on the mechanical properties of FFRP is investigated. With the increase of hygrothermal aging time, the tensile and bending strength of FFRP increased at the early stage of aging and then decreased. After hygrothermal aging, the impact peak force of FFRP decreases and the absorbed energy increases due to the increase of internal defects and plasticization of composites.
materials science, composites,polymer science